Question about Hoover Nextra HNL 3166 Z Front Load Washer

1 Answer

The machine will not spinn, the washing is very wet when finnished washing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,741 Answers

Clothes are wet after spinning this is due to faulty Motor coupler. test the motor coupler, re-start the washer in its spin cycle. Let the machine run for a minute, and then open the lid and notice whether the tub is spinning:If it's spinning when you lift the lid, the coupler is fine.If not then the coupler is broken.It has to be replaced;.This plastic-and-rubber component is mounted to the shaft of the motor on one side, and to the transmission on the other. Over time, the coupler wears out and fails. When that happens, you need to replace it completely. ----------------------- If the washer doesn't reach its proper spin speed, the clothes may be too wet at the end of a cycle. Check to be sure the load is properly balanced and run a spin cycle again. If the clothes are still wet, you may have a worn motor pulley or tub bearing. Replace the applicable component. Thanks.

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing Machine will not spinn


Try to check the drain pump.

Jan 14, 2014 | Bosch Washing Machines

1 Answer

Cloths come out wet after spinn


The water drained out ok? If yes, the timer is telling the motor to reverse and run in the drain spin direction and it is likely ok. If the draining is slow the clothes could come out wet, if the belt is cracked or streatched the clothes could come out wet. If the motor is not running through the entire spin/drain mode the timer could be at fault.

Will Not Spin
• Check for unbalanced load.
• Check for broken or slipping belt.
• Does the house drain system accept water from
machine?
• Check for blocked drain hose.
• Check for binding tub seal.
• Check for partial engagement of brake assembly.
• Check for obstruction between tubs.
• Check for broken impeller on pump.

Jan 02, 2012 | Amana NAV5800A Top Load Washer

1 Answer

The drum will not spinn?


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

May 20, 2010 | LG WM1814CW Front Load Washer

1 Answer

Kenmore washer 70 series how to replace belt


The belt is replaced by loosening the tensioner.

then slip it off the pulleys.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 09, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Top load direct drive will not spinn, but pump water out.


COUPLING BETWEEN MOTOR AND TRANSMISSION IS SHEARED AND NEEDS REPLACED.

Jun 25, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Clothes still very wet after spin


Common problem if drain tube goes to laundry tub. Tub drain is slow, so water is siphoned back into washer at end of cycle.
Other solutions: Partial blockage of drain tube before or at water pump. Take off front washer panel, exposing pump and disconnect hoses. Remove obstructions and re-assemble.

Jun 12, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Spinning problems


there are quiet some possibilitys. As far as i understood now, the machine is not spinning in normal washing cycle or not reaching max speed. but it is spinning correctly in spinn programm.

Two things i woukd think of:
1. Maybe there is a control to set the spinning speed? maybe you need to turn that to max.
2. You may have a (partwise) defective control unit.
2a: if you have a modern machine this means expensive repair with no DIY options
2b: if you have a quiet old model and A LOT of DIY it might help to clean te contact terminals of a mechano-electric control unit. But be warned: that is a challinging task.

i dont have any better idea right now. sorry.

May 28, 2009 | Washing Machines

1 Answer

Washing machine WK61420GB drum does not turn


replace the brushes in the motor ( approx £5 parts)

Dec 30, 2008 | Siemens WK61420GB Front Load Washer /...

Not finding what you are looking for?
Hoover Nextra HNL 3166 Z Front Load Washer Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...