Question about VCRs

1 Answer

Looking for three digit code

I want to hook up my vcr to my dish network and they say I need the three digit code to do that, I just want to know the code to my vcr

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try going to www.oneforall.com

Posted on May 18, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the three digit code for vcr,RCA model VR617HF,for Dish network.


Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remotes. You should be able to locate the model of your remote on the back of the remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remotes and also the instructions for addressing the remote to your RCA VCR. I hope this info helps and if you have any further questions let me know! :)

Model of remotes RCA codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 1690, 1742, 1749, 1527, 1627, 1650, 1816.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 1615, 1749, 1690, 1742, 1627, 1650, 1666, 1854.
4.0 and 4.4 IR/UHF remotes - codes 1690, 1749, 1742, 1627, 1816, 1537, 1842.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 1666, 1627, 1749, 1650, 1690, 1742, 1816.
20.0 IR and 21.0 IR/UHF remotes - codes 1816, 1703, 1719, 1720, 1749, 1765, 1518, 1528, 1539, 1541.

Instructions for addressing the remote to the VCR
  1. Press and hold the VCR mode button until all mode button back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment.
    Note: The light will blink off after each digit is entered and then return to a steady light.
  3. Press the POUND (#) button.

    If the code entered is valid for the remote, the mode light flashes three times.

Oct 17, 2011 | RCA VR618HF VHS VCR

1 Answer

Hooking VCR to DISH Network Reciever Box


In order to diagnose the problem I need your help.

Have you hooked the dish receiver directly into a tv or another device and had it working?

Have you tried a different cable at all?

Have you tried pressing the ant. button on the remote or tv/vcr button?

Please update me with as much info as possible and I will figure out where the problem is coming from. thanks

May 04, 2008 | Toshiba W627 VCR

1 Answer

What are the dish network remote codes for the product below? dish remote 311 / 301


Hi my name is Mike Houston of DISH Network and I see you arelooking for the codes for a Sharp VCR for a 301/311 remote. I will be happy to helpwith that and I will send a link to help with the steps, the codes for yourSharp VCR are 669, 727, and 746. You will need to press and hold the desiredmode button (TV, VCR, AUX) until all mode button back-lights come on, thenrelease. Then put a 1 and the three digit code for the corresponding equipment,the light will blink off after each digit is entered and then return to asteady light. After you enter the 1 and the three digit code press the #button. If the code entered is valid for the remote, the mode light flashesthree times.

Aug 13, 2011 | Sharp VC-H810U VHS VCR

1 Answer

I need the manufacture code for the panasonic PV-V4624S VCR so i can set it up through my dish network receiver. It should be a 3 digit code.


Try these codes, If they don't work there will be instructions for a Power Scan as well this should resolve this!
Codes: 734,856,855,868,869,870,871,872,873,882,813,765,840,841,639,699,663,714,715,716.
Power Scan:
1.) Press and hold the correct VCR button (about six seconds) until all mode button backlights come on, then release.
2.) Press 222 pound (#) then record three times.
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
To verify the code works try several different functions for that equipment.

Daniel Busa
DISH Network Customer Service

Feb 09, 2011 | Panasonic PV-V4624S VCR

1 Answer

Would you happen to know the 3 digit manufacture code for a Sharp VC-H992U Video Cassette Recorder? I need this info to input it into my TV so that the VCR will work with the TV. The TV provider is Dish...


Hello! Here is the link to our remote codes, if that fails follow these additional steps for the Power Scan this should resolve it as well.
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf


***BEFORE STARTING THIS USE THE INSTRUCTIONS IN THE LINK TO PROGRAM THE REMOTE TO 222
  1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate (about 3 seconds), then release.
  2. For AUX mode Power Scan ONLY: press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
  6. To verify the code works try several different functions for that equipment.

Daniel Busa
DISH Network Customer Service

Dec 23, 2010 | Sharp VC-H992U VCR

1 Answer

I have Dish network. I want to record TV onto the VCR, but cannot get channels to record. i can playback videotapes and the record works, but cannot figure out how to get the signal to record.


The output of the Dish Network box should be hooked to the input of the VCR.
The output of the VCR should be hooked to the input of the TV.
The VCR should be on channel 3 to record. Select channel to be recorded on the Dish Network box.

It sounds like you have Dish Network box output hooked to TV input.
& VCR output hooked to an aux. input on the TV.

Nov 28, 2010 | Quasar VHQ401 VHS VCR

1 Answer

I am on dish network, how do i hook up vcr to tv


What does Dish have to do with VCR?

Hook VCR to an input on the TV.
Most likely it will be with a coax cable or a three wire - video / audio harness.

Dec 29, 2009 | VCRs

1 Answer

Can;t record on VCR since Comcast went Digital


I have Dish Network and a DVR and I do not know what I would do without it. I can record 2 shows at once and watch to 2 recorded programs while recording two shows. But getting to your problem... It sounds like the vcr cannot process the digital signal. You could try hooking up the vcr to the rca inputs from the cable box but you will only be able to record whatever channel the cable box is on. Any way you hook them up the programming of the vcr to change channels at different times for different programs probably won't work now. It sounds like Direct TV with two DVRs will solve your recording needs.

Sep 13, 2009 | Toshiba VCRs

1 Answer

Want to use the dish network remote control for my panasonic vcr


The Dish network technician was here on another issue and scanned for the VCR using the remote control. The code is 734.

Mar 25, 2009 | Panasonic VCRs

Not finding what you are looking for?
VCRs Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top VCRs Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...