Question about Whirlpool LSR5132PQ Top Load Washer

1 Answer

We have to turn the water on from the wall to get the machine to work, then afterwards, we have to cut the water source off if not, it will keep running.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 347 Answers

One of the solenoids in the fill mix valve is stuck open. The mix valve will have to be replaced.Its a fairly easy repair on a top load and the part is about fourty dollars.

Posted on Sep 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I stop the water in my 2032


The only thing that comes to mind is the brew solenoid on the top of the machine. The gasket might be damaged or something is keeping it open.

May 18, 2014 | Fetco International CBS-2032 Coffee Maker

1 Answer

Hello ,after using the machine, water keep dripping inside even I'm not using it, it has been doing that for several weeks, thanks for your help. alex


Hi Alex. Welcome to FixYa. I am Kelly.

Water leaking by when the unit is supposed to be off is caused by water leaking by the inlet water valve diaphram.

Here is what you can do in an attempt to clear any internal debris of the water valve.

Both wall faucets off
1. Disconnect One hose from the water valve and remove the inlet screen by using a knife blade on the outer edge of the screen.
2, Reconnect that hose to the water valve.
3. Place the wall end of the hose in a bucket
4. Turn on the water at the wall for the hose that is still connected to the wall.
4. Select WARM wash and start a fill cycle. (Water will back flush into the bucket.
5. Use a hammer HANDLE and tap the hose connections of the water valve. (Your trying to losen the debris)
6. After a minute turn off the warm fill and the water faucet at the wall.
7. Disconnect the removed hose from the water valve and install the inlet screen AFTER cleaning the screen.
8 Reconnect the hose to the water valve and the wall connection.
9. Repeat steps 1 - 8 for remaining side.

If this does not stop the water drip then the water valve will have to be changed.

I will repost later the water valve part number and source.

Thanks for choosing FixYa.
Kelly

Sep 26, 2010 | Maytag SAV4655A Top Load Washer

1 Answer

Machine turns on and off by itself and keeps doing it


Hubby says it could be a stuck button. Otherwise there could be a fault with your front control panel. Feel special, he's never come across that before!

May 20, 2010 | DeLonghi EAM3500 Espresso Machine/Coffee...

1 Answer

The machine keeps cutting out in the middle of the


hi,i think its due for service so you have to take it to the company you purchased it from or you check if nothing is stuck in the machine that blocking the passage of water,or you also call an electrician to help you check your electricals on the wall or the one connecting to the machine.thanks.will really appreciate your understanding.

Mar 08, 2010 | AT&T Siemens S46 GSM Cellular Phone

1 Answer

The belt broke, it was replaced, but afterwards its overflows,


If water is overflowing check the small plastic line going from the bottom of the tank to the water level switch. It could be disconected. To check the water vales, set machine to fill, while the water is running into the tub unplug the power cord from the wall, the water should stop, if not the water valve is faulty.

Oct 11, 2009 | Speed Queen Washing Machines

1 Answer

Leak


You may need a new water valve. Turn the water off at the wall or source.

Replace the water vavle. You can go on line and order parts from almost any source. I like repairclinic and partselect go to Google and google your Manufactures name and parts, ex Maytag parts.

You will need your model and serial number.

Sep 29, 2008 | Maytag Legacy Series Top Load Washer

1 Answer

My drum of my washing machine fills with water when it is not in use. i have moved the outlet pipe many times but it keeps on doing it. should there be a cut off valve to stop the water returning?


You probably have a bad water valve that the fill hoses attach too at the back of the washer, if the solenoid is stuck open the water won't stop unless you shut it off at the wall.

Jul 30, 2008 | Washing Machines

1 Answer

Westinghouse washer lT609s - tap problem


if I understand you correctly ... your washer keeps filling with water and you must shut them off at the wall to stop the water from coming into it?

this is a stuck water valve .. there may be something in your water valve keeping it open...

unhook your hoses and check them..

hope this helps

Apr 05, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool LSR5132PQ Top Load Washer Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75235 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...