Question about Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

1 Answer

I have a Fisher and Paykel 2-drawer dishwasher. The top drawer is stuck in the rinse cycle and I cannot change it to another cycle. Please advise.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher and P... Master
  • 3,247 Answers

Assuming the controller of the top drawer is still ok, take a clean damp cloth and wipe the top panel where the program keys are located.

If nothing happens, you will have to check if the controller connector is not loose. Take the front cover off and check the controller connectors.

Please rate this solution to help fixya serve you better in future.

Posted on Sep 26, 2010

  • Amy J North
    Amy J North Oct 06, 2016

    I have had this problem before and never knew what to do! It had corrected itself but probably becuz I had wiped it down, and didn't realize I was correcting the issue. Even turning off breaker did not fix the problem :-) This is a simple fix!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i repair fisher paykel dd603 problem top drawer stuck on fast cycle, bottom drawe stuck on normal cycle


you will need to replace both draws control boards, with the dd603 control boards they have a small touch button panel on the top of the board which they didn't put a protective layer or plastic over and basically what happens is steam gets on the copper tracking and corrodes it hence the fact it doesn't work anymore, all new control boards even the replacement for yours comes with a plastic strip over the board. hope this helped

Oct 06, 2014 | Fisher and Paykel Dishwashers

1 Answer

Fisher paykel dishdrawer


It is likely the top panel of the drawer needs cleaning.
First turn off the mains power to dishwasher and take the plug out if accessible. Wait a little and put the plug back and turn on the mains power. If this does not fix the problem, then get clean damp cloth and wipe the panel buttons on top inside of drawer.

May 17, 2013 | Fisher and Paykel 24 in. DS603H SS...

1 Answer

Machine Running noisy during cycle


lift off spray arm and remove motor rotor and remove any debri this can cause a noisey motor.

Sep 04, 2012 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

Fisher Paykel double drawer built in top drawer stops mid cycle.


It would help to know which LEDS are on when it stops. Are you able to open the lid etc. Does this happen with the short rinse cycle as well?

Oct 17, 2010 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Three cycles On


Take a clean damp cloth and wipe the touch swithes and the side and top edges of the dishwasher drawer.

please post a comment to report back if anything changed. Will try to solve it for you.

Jan 08, 2010 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

One drawer totally stuck


I have had this problem too. You need to make sure the top lip of the inside of the drawer is dry. I usually just take a paper towel and dry that area off and then it works.

Jul 04, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Programme stuck


Try swapping the motor controllers (computers) over between the two drawers to see if the fault moves while doing this give the touch buttons at clean. Any questions feel free to ask. Cheers

Apr 22, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher Logo

613 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Brian Coughlan

Level 2 Expert

275 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...