Question about Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Bosch Wahing Machine 300 NEXXT Series

Makes a humming noise and won't drain.

Posted by on

1 Answer

Sounds like a baby sock stuck in the drain. Remove the access door bottom right. Reach in and unscrew drain cover slowly and a little at a time. Put a sheet pan under it to catch the water as it drains. It’ll fill the sheet pan a couple of times so have patients. That’s where your clog will probably be.

Posted on Nov 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When door locks ..the drain pump runs. As water enters it is drained instantly. No water in drum,drain passage clear. Unplugged the pressure sensor..still DOES IT Bosch Nexxt 300 WFMC2201UC/13


Possible that the drain pump is running due to a small leak is present at the base of the machine, providing this has a metal cover on it ,it gets water in here which activates afloat switch switching on the pump hence draining the machine to avoid possible flooding, if the pump does not appear to be running then the drain hose is too low resulting in syphon effect,in which case raise it...Good luck

Jun 01, 2015 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Noisy pump on bosch 300 series washer


This video will show you how to clean the pump and how to find the fault on a washing machine that won't drain or empty the water away on Bosch, Neff or Siemens. Please remember to subscribe to our YouTube channel for all appliance tutorials
a thumbs rating is appreciated for answering your free question.

Aug 19, 2013 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

Is there a reset button on a bosch 300 series washing machine


turn off the power to the unit for 45 min, that resets it

Dec 05, 2012 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

What is the p:01 code on the Bosch 300


Possible this could be jammed lock and is advisable to check the lock settings.
Please check this link for tips.:
Door lock

Jul 03, 2012 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

I have a bosch nexxt 300 series washing machine. The problem is it had beeped code E04 the hoses were somewhat dirty and i cleaned those,but now the pump doesnt seem to be running and its getting hot. ...


bosch nexxt 300 series washing machine This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Dec 31, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

My brand new Bosch is not draining and is showing E:13 error code


Put the washer on cold and run "TWO" cycles. There is too much soap or fabric softner.

Mar 28, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Bosch dishwasher timer freezing


There is a recall on the control board of many of these models, butyour problem is likely not related. It sounds like a plugged drain system or a possible bad drain pump. That's why you are hearing the pump running constantly. I have written a guide to help. It is here. Thanks!

Mar 24, 2009 | Bosch Nexxt 300 Series WFMC2201UC

Not finding what you are looking for?
Bosch Nexxt 300 Series WFMC2201UC Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...