Ive read through the other posts about this problem but i dont really understand the solutions. i can get into my router and everything but its just the next stage about the ports and the unpn i dont understand. thankyou and i hope you can help =)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
At any cost do not disable the NAT - because thisis the feature which allows multiple device to work with router
So only option you've got now is to reset the router. It should be at the rear end of the router. Hold onto it for 30 seconds, u'll see the light flash and router reboot
Once you've done with that - configure router and make it work.
And as of for the Xbox Issue try these steps:
1 - Assign a Static IP address in the Xbox: - Go To Network Settings - Configure Network - Change IP settings to Manual - IP Address: 192.168.2.45 Subnet Mask: 255.255.255.0 Gateway: 192.168.2.1 - DNS settings to Manual - Primary DNS: 192.168.2.1 Secondary DNS: 220.127.116.11
2 - with any of the Wired Computers - open IE - type - 192.168.2.1 - u'll get the Router Interface - left hand side in the list of options - click Firewall - leave password blank - disable and apply changes - click Virtual Servers; - under enable place a checkmark - description : Xbox, Inbound Pot : 80(if there are two boxes here duplicate in both the boxes), Type: TCP, Private IP: 45, Private Port: 80 - So Similarly fill up the table for these following Ports TCP: 80, UDP: 88 Both(TCP&UDP): 53, 3074
If u've a DSL connection, call ur ISP and make sure ur modem is bridged and the NAT is disabled
The problem in this scenario is entirely not NAT issue . To overcome the issue open some of the port ports viz 80,3074 for tcp/udp on the router and enter the ip address on the router which is the ip you have for the x-box and then try the connection test.