Question about OKI C5150n Led Printer

Open Question

Replace image drum 562 c drum light OKI C 5850

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leroyal
  • 2120 Answers

SOURCE: OKI 3300 Image Drum Problem

Did you remove the plastic tape from the new cartridge?

Posted on Feb 16, 2009

  • 1 Answer

SOURCE: resetting image drum after replacing for oki b4600

On the printer press the menu button until you reach MAINT.Then press the item + button until you reach DRUM CT RESET. Then press select.YOUR DONE

Posted on Oct 30, 2009

pineworks
  • 4041 Answers

SOURCE: OKI C8600 Replace Image Drum - 563: K Drum Life

Solution:

  • Power on printer while holding both the + & - buttons simultaneously; release when “OKIUSER” is displayed.
  • Press either the + or – button until “ENGINE DIAG MODE” is displayed; press the Enter button and “DIAGNOSTIC MODE xx.xx.xx” will be displayed.
  • Press and hold both the - & On-line buttons simultaneously until “ENG DIAG LEVEL2” is displayed.
  • Press either the + or – button until “CONSUMABLE COUNTER SET” is displayed, press the Enter button; you are now in the menu to set various consumables.
  • Press either the + or – buttons to scroll through the various consumables, at the desired consumable press the Enter button and the last digit of the count will start flashing.
  • Press the Cancel button to decrease the digit amount or press the On-line button to increase the digit amount; press the + or – buttons to move along individual digits in the count.
  • Once the count is at the level you desire, press and hold the On-line, Cancel, & Back buttons simultaneously until the “*” reappears next to the count; consumable’s count are reseted to the number you specified.
  • Press the + or – buttons to move to the next consumable and repeat at step 5.
  • Once all consumable counts have been set to desired amounts that are below their end-of-life thresholds, you can use the Back, +, & - buttons to exit through the menus
  • until “INITIALIZING” is displayed.

Posted on Jan 30, 2010

  • 97 Answers

SOURCE: OKI C6100 has the following error when printer is

Try this:

1.Press Menu = printer displays "Paper Menu"
2.Press Next 4x = printer displays "System Menu"
3.Press Select 1x = printer displays "Factory Defaults"
4.Press Next 7x = printer displays "Reset Toner Life"
5.Press Select 1x = printer displays "Resetting Toner Page Count"
6.Press Ready

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oki b431 black image drum lock error


The drum lock error is caused by one of two items. Either the drum has seized and will not turn or the drum motor has failed and requires replacing.

Jul 06, 2017 | OKI Office Equipment & Supplies

2 Answers

OKI B410dn drum life


Every Oki B410d printer, Oki B410dn, Oki B430d, Oki B430dn, Oki B440dn, Oki MB460, Oki MB470, Oki MB480 are contacting the module of the Oki 43979002 drum and fuse with chip developed in the module imaging unit through joints being in the bottom part of a printer like in a photo. Eksploatacja Oki B410 pochodne drukarki reset kasowanie bbna

Jan 28, 2014 | Oki Electric Industry C8600n Led Printer

1 Answer

Oki b411dn error 563


The image drum cartridge has reached the end of
its life. Replace the image drum cartridge

Jan 12, 2014 | Oki Electric Industry B411d Printer

1 Answer

Message saying drum unit life on OKI PRINTER C510dn


This model OKI printer is not an inkjet printer, it is a color laser printer. and uses color toner cartridges.
The printer image drum unit has reached the end of its service life and this drum unit needs to be replaced.

I suggest you Google the Internet for an OKI image drum unit for your model printer, You will get various suppliers and their prices.
The image drum unit will cost approx. A$200

Feb 07, 2013 | OKI C5100n Laser Printer

1 Answer

I HAVE C5500 OKI PRINTER AND THE ERROR SAYS REPLACE IMAGE DRUM 561:M DRUM LIFE I PUT IN NEW MAGELN AND STILL HAS THAT MESSAGE


oki printer c5950 fix new cartridge & drum coming error replace image drum 561:m drum life

Jan 15, 2013 | OKI C5500n Printer

1 Answer

Have a oki c9800 ...gives error 923. have replaced the motor unit for black image drum but it prints some pages and gives the error again


923: Error - Black Image Drum Lock Error
The K ID unit is not operating
properly.

Check to confirm that Image Drum is seated properly.
Check to confirm that the K ID
unit is in position.
Replace the K ID unit.
Replace the K ID motor.

Dec 10, 2009 | OKI C9600hdn Laser Printer

2 Answers

OKI C6100 has the following error when printer is turned on: Replace Image Drum 562:C Drum Life


Try this:

1.Press Menu = printer displays "Paper Menu"
2.Press Next 4x = printer displays "System Menu"
3.Press Select 1x = printer displays "Factory Defaults"
4.Press Next 7x = printer displays "Reset Toner Life"
5.Press Select 1x = printer displays "Resetting Toner Page Count"
6.Press Ready

Nov 11, 2009 | OKI C6100dtn Led Printer

1 Answer

Resetting image drum after replacing for oki b4600


On the printer press the menu button until you reach MAINT.Then press the item + button until you reach DRUM CT RESET. Then press select.YOUR DONE

Oct 03, 2009 | OKI B4600 Printer

1 Answer

OKI 3300 Image Drum Problem


Did you remove the plastic tape from the new cartridge?

Feb 16, 2009 | Oki Electric Industry C3300n Laser Printer

1 Answer

OKI C5400 - REPLACE DRUM


To replace the drum - leave the toner in place and pull it upwards. This will remove the drum and toner together. Now release the toner from the drum. Fit the new drum - don't forget to remove the orange packing bar and replace the toner. Easy when you know how.

Apr 16, 2008 | OKI C5400 Laser Printer

Not finding what you are looking for?
OKI C5150n Led Printer Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

Jimbras

Level 1 Expert

13 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...