Question about Zodiac Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

The flexifoot on my old baracuda is split - Zodiac Baracuda G4 Automatic Pool Cleaner Ne221

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 116 Answers

What do you mean by flexifoot, and what do you mean split? The large rubber disc is called the "durometer" disc (on the G3 it's called a finned disc). The small rubber pad the the big one fits over is called a "foot pad", the foot pad fits over a hard piece called the foot plate. That being said.... if your referring to the durometer disc being split, or torn, I assume it is very worn out and needs to be replaced. if it's new and torn then it may still work fine. if it is worn out chances are you need to replace the foot pad, and possible a couple other pieces.

Posted on Sep 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diaphragm housing unscreews from the baracuda


is the motor mounted on a dampening plate? do these screws have lock eashers behind them? may need to install these..

Oct 18, 2013 | Zodiac Baracuda G4 Automatic Pool Cleaner...

1 Answer

Zodiac ranger has good suction but doesn't move


Usually if you have good suction with a Baracuda and no movement you either need to clear the diaphragm of debris, or replace the diaphragm if it's got a hole in it.

Check out this video (not mine) for how to pull the diaphragm out.
http://www.youtube.com/watch?v=FRR1Gsps8Js

It's pretty straightforward, just keep undoing things until you get to the flexible rubber bit. You have to check fairly carefully for holes because even the smallest opening means it's curtains for the diaphragm.

Good news is though that Zodiac should have a 1 year warranty on the diaphragm, which you can check by looking at the moulded stamp on the part. If it's under a year old your local dealer should just swap a new one for the old without any dramas.

Mar 16, 2013 | Zodiac Baracuda Ranger - Above Ground...

1 Answer

Ihave pulled my baracuda apart and have no instructions on how to put it back together.


Below is a copy of the users manual for these pool cleaners from the Zodiac website. It has detailed instructions and illustrations that will show you how to put the cleaner back together.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 11, 2011 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

Zodiac Baracuda Zippy Pool Cleaner only clean one pool side because strong jet don't let move to other side


If you don't have directonal eyeballs on your jet's you can get a dirveter for the jet that will push the water down the wall rather than out into the pool. Get these at your local pool store. Baracuda and Kreepy Krawlie both make them.

Jul 05, 2010 | Zodiac Baracuda Zippy Pool Cleaner

2 Answers

Can Baracuda Diaphragm be replaced?


If you can't find any junk in the diaphram or throught. The best thing to do is take it to a store they can show you how to do this and they will not usually charge for more than just the part.

May 28, 2010 | Zodiac Baracuda G4 Automatic Pool Cleaner...

1 Answer

Baracuda gets stuck


Usually this can be fixed by redirecting thr returns in the pool down the wall or anywhere that will break up any currents in the pool.

Dec 30, 2009 | Zodiac Baracuda G4 Automatic Pool Cleaner...

1 Answer

Baracuda G4 won't clean whole pool. goes to a corner and stays


Maybe your hose needs to be reprogrammed by unhooking and lying it in the sun for several hours.

Apr 25, 2009 | Zodiac Baracuda G4 Automatic Pool Cleaner...

1 Answer

Zodiac baracuda wont go to shallow end of pool


If you can, adjust your intake valves so more of the suction is coming from your vacuum and less from your skimmers. This will allow the the vacuum to climb out of the deep end.


Mar 22, 2009 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

Baracuda G4 shakes


Here is a link the trouble shooting guide on Baracuda. This should answer all the questions you have about the cleaner.

Feb 25, 2009 | Zodiac Baracuda G4 Automatic Pool Cleaner...

Not finding what you are looking for?
Zodiac Baracuda G4 Automatic Pool Cleaner Ne221 Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

john h

Level 3 Expert

10986 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...