Question about Innovage 1502084 Corded Phone

1 Answer

Hum loud hum with dial tone, people on other end has trouble hearing me, voulume on my end low

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Locate phone away from devices which may interfere, basically anything with a transformer. Dont use long extension cords to connect phone to a wall jack that is far away. Plug ac power adaptor into spike-strip line filter like an isobar. Try another extension cord and/or a different location to see if you can isolate the cause of interference. Interference will get in 1 of 2 ways, through the phone line, or through the power supply.

Posted on May 17, 2008

  • Mark Day
    Mark Day May 17, 2008

    Worst cases of hum I have seen have been from either faulty extension cord to wall jack or faulty handset cord.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I CAN BARELY HEAR MY DIALING TONE BECAUSE OF THE LOAD BUZZING THAT IS COMING FROM THE HANDSET ON MY CDW4901SE


contact phone line provider ask them to test your line for a corroded connection or water ingression.

Jun 15, 2016 | Phones

2 Answers

How do I unblock my phone number


After you enter *67, you hear the dial tone. Dial the outbound number. Your caller ID is not presented on the receiving end.
After you enter *82, you hear the dial tone. Dial the outbound number. Your caller ID is presented on the receiving end.

Sep 25, 2014 | Phones

1 Answer

My wireless phone is about seven years old. There is a loud static sound in the dial tone and a loud buzzing sound when I am talking, which can also be heard by the person I am talking to. I just put new...


Try disconnecting the cordless phone base unit from the phone jack where it's connected and plug in a basic corded phone. If you still have the noise, the trouble is in the phone line itself and you'll need to contact your telephone service provider.

If the phone line isn't at fault, the trouble is in the base unit. Most likely, the power supply filtering isn't working, and you're hearing hum in the audio as a result. If the base unit uses an external plug-in adapter (a "wall-wart") with a DC output, you can try replacing it with a new one. Radio Shack sells replacements. Just be sure to get one with the same voltage rating, the same or higher current rating, and the right polarity plug. It may be that the old adapter isn't filtering any more because of its age.

If the adapter is an AC output type, or the base has a built-in power supply with a regular AC power cord, you should probably shop for a new phone. The trouble is in the unit itself, and you'll spend more trying to have it fixed than it's worth.

Dec 26, 2010 | Uniden Phones

2 Answers

I pick the phone up, no dial tone. Display says


We called the phone company.....There was a problem up on the telephone pole. They fixed it, no charge.

Jan 21, 2010 | Vtech Cordless 6041 Phone

1 Answer

I cannot dial on any of my Undien 5.8 phones. I


bases are very sensative to power surges and lightning strikes.

it may have been hit

Jul 01, 2009 | Uniden Cordless Phone

1 Answer

Dial Tone but won't call out.


The problem was the main phone line not the phone itself

Jan 07, 2009 | Uniden Cordless Phone

1 Answer

KX-TG 5632


maybe you have un read mail message, or the battery has less power inside, or eitherthe line is down.

Jul 14, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Cordless telephone sw/from pulse to tone


In General Electric (GE):

TONE/PULSE DIALING
To set to tone or pulse dialing:
1. Press and hold the program button for two seconds. You will hear a beep.
2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing.
3. Press the program button again. You will hear a confirmation tone.

Nov 25, 2007 | GEH5450 Cordless Phone

2 Answers

Unable to dial out, check voice mail and see call display


Hi at the back of the phone you will see a selectable Hi/Lo/Off switch. Slide the (Ringer) switch to High position or Low position to turn the ringer on. Hi for high volume Lo for low volume.

To prevent hearing any ringing of incoming calls slide the (ringer) switch to the off position but when you ready to accept incoming calls again remember to slide the switch back to either Hi or Low setting. Hope this made sense and helped.

Oct 24, 2007 | Curtis Trimline TID582 Corded Phone

Not finding what you are looking for?
Innovage 1502084 Corded Phone Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Innovage Phones Experts

Ronald Tyler
Ronald Tyler

Level 1 Expert

26 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Innovage Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...