Question about Singer CE-100 Futura Computerized Sewing Machine

1 Answer

I have a Singer Futura CE-100 and everytime I try to wind thread on the bobbin, the machine stops and beeps. I have tried redoing every step and there is no change. Any help or suggestion to resolve this problem? Thanks, Margie

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,788 Answers

Go to singerco.com and see if their under their frequently asked questions may have your answer. You can also order a manual for your machine, for $15. They have a great customer service staff, try calling them at 1-800-4singer. Good luck, hope you get sewing again with your machine. One time my girlfriend found out the beep meant all was good, so hopefully you are going to have a good laugh over the problem, she did.

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bobbin won't wind on Singer futura CE-100


My singer hasn't wound bobbins for years and I don't care because I use a Side Winder bobbin winder. It's much easier than takining the thread off the machine anyway. Available from Hancock, Jo Ann or even Wal Mart for about $30.

Sep 09, 2012 | Singer CE-100 Futura Computerized Sewing...

2 Answers

Machine is threaded correctly on both the bobbin and top.I have followed the manual step-by step and tried suggestions from other users. The machine will stitch about 2 inches and then beeps. The thread...


It sounds as if you have tried all the usual fixes so it might be a problem with the actual circuitry causing this. I'd take it into nearest Singer the sewing machine dealership or shop where you bought it and ask them to service it (or if still under warranty, for them to diagnose the fault).

Jun 11, 2011 | Singer CE-100 Futura Computerized Sewing...

1 Answer

I have a Singer CE-100 and I would like to know why it keeps beeping and stopping?


There are a few problems this could be. Your top thread could be broken or about to break; your bobbin thread could be broken, about to break or empty/about to become empty and is loose around the bobbin; you could have a birds' nest (a mass of thread just under the fabric/presser foot and/or within the feed dog and bobbin) forming and causing a jam; or it could be your Futura having a little bit of a hissy fit. Obviously, if you've checked for broken thread you need to move on. Check for a birds' nest by removing the fabric and clip your threads. If you find one, clear it, rethread your bobbin and begin sewing again. If there's no birds' nest, then place the fabric back in and try sewing/embroidering again. If the machine acts up again, I recommend removing the fabric/hoop, rethreading your top and bobbin threads, replacing fabric/hoop and resuming where you left off. If the machine still gives you trouble, try hitting the start button for a couple of times and seeing if the problem doesn't simply resolve itself. When you're embroidering areas that have a few small, short stitches only, the machine seems to act up a little and then behaves fine once you bypass the area. Be sure to take all of the other steps first, though, because a birds' nest will RUIN a beautiful seam or embroidery.

Nov 11, 2010 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Bobbin is tangeling thread and my singer futura machine stops and beeps. I have tried to clean the bobbin area and replace the bobbin. I think it is not in correctly because it appears to move around and i...



You're best bet is probably to buy a new bobbin casing. They're usually about $25 or so and you should be able to find one on eBay by searching for Singer (your machine name and model) under the Crafts category. The silver plate on top of the area covering where you place your bobbin into has screws you need to carefully remove (careful not to loose them!). If you need to, take pictures with your cellphone or digital camera as you remove the old bobbin casing so you can see how to put the new one in.

Jan 24, 2010 | Singer CE-100 Futura Computerized Sewing...

1 Answer

"thread breakage detected"


I had the same problem and one day my 9 year old said Mommy the thread is winding and cathing. I noticed that if the thread is not close to the silver metal arm it coils and makes a knot around the silver feed arm and also sometimes it cathces the little white plastic peace where the silver feed arm is connected to the machine.

Mar 24, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Beeping lights when trying to sew


Look at the back of the needle threader. There is a buttonhole lever. Pull it down and push it back to the top. The machine gives a warning message if the lever is down and you wants to sew or embroid.

Good Luck

Dec 01, 2008 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Futura ce-100(Singer)


Sounds like a tension problem. Email the singer company at talktous@singerco.com They should be able to help!
They responded back to me the same day.

Nov 17, 2008 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Unable to sew straight stictch with singer futura ce 100


When I had this experience I cleaned the thread path under the plastic cover. There was a piece of thread caught between the disks.

Aug 09, 2008 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Singer CE-100 Futura Computerized Sewing Machine Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Cindy Wells

Level 3 Expert

5163 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...