Question about HORNET 563t Security/Remote Start System

1 Answer

My Hornet 563T system has suddenly decided to start turning my truck on a 4:30PM every day. I cannot figure out how to stop it from doing this. any ideas?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

Here's a manual you can download:
It's possible that the programming on the truck is corrupt, or that even some other signal through the air is triggering the alarm. Get hold of the manual, and call their support number- they should know about these problems, and might be able to offer some advise or help.
You can try to take the batteries out of the start modules, to see if the truck system is at fault, or getting triggered by some mysterious source signal.
If you can find a reset to the programming, and reprogram it, that might fix the problem.
Good luck, and hope this helps.

Posted on Sep 16, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there another way to program a remote start remote, The way its suppose to work doesnt.:door open, ACC on, push valet then again and hold. I think the door is not hooked up to read open.

563T Your Valet Alarm W/Remote Car Starter - Dr.Detail > MAIN > YOUR VALET
Featuring: Viper, Hornet, Directed Amps, Viper Audio, Compx Subs, Your Valet ... 563TYour Valet Alarm With Remote ... A Free Wiring diagram, Installation parts

Sep 24, 2015 | Televison & Video

1 Answer

My hornet (563T) remote starter does not unlock my hatch, how do i fix? it worked perfectly for 6 years

not sure what kind or car you have but if it has a factory trunk release does that still work?If so the button on the remote may be bad but it more likely your car might have a relay that turned the negative output of the alarm to a 12volt out. This relay might have gone bad with time. If it is a newer car and is using a bypass to work the trunk it may be a connection problem.

Jul 23, 2014 | HORNET 563t Security/Remote Start System

1 Answer

Hornet car alarm system 474t battery

Hi, Anonymous the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda CB250 Shop Manual
Honda CB250 Owner Manual
Honda CB250 Hornet
Honda CB250F Wikipedia

Mar 31, 2014 | 1996 Honda Hornet 250

1 Answer

Is the Hornet 569T subject to many problems?

No. Hornet, Avital, Valet, among others are all DEI (Directed Electronics Inc) brands. DEI is the maker of Viper alarm products. So, for those of us in the industry, we know that the "brain" on a Hornet system is EXACTLY the same as a Viper system.

Very Reputable and highly reliable!

Dec 22, 2010 | Hornet 569T One-Button Remote Start System

1 Answer

Why does my 563 t hornet car alarm not chirp anymore.but it still locks and unlocks

Your system may be in valet. Open any door, press lock button on transmitter, press aux, press lock again. If your alarm was in valet, it's now active, if it was active, it's now in valet. Hopefully, this was the issue and nothing is wrong with your siren.

Sep 26, 2010 | 563T Car Alarm - Rem Start - Keyles 2-4but...

1 Answer

The bottom blade has stopped spinning. Help

ok this is what you got to do you have to take apart the helicopter and in it try to turn the bottom blade you will hear a clicking sound from there you should see whats wrong i had the same problem hope this helps

Aug 30, 2010 | NKOK Halo Hornet RC Helicopter

Not finding what you are looking for?
HORNET 563t Security/Remote Start System Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buck Vehicle Parts & Accessories Experts

xxxxxx xxx

Level 3 Expert

4861 Answers


Level 1 Expert

8 Answers


Level 2 Expert

252 Answers

Are you a Buck Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides