Question about Seiko Coutura SNA341 Wrist Watch

1 Answer

When I pull out the crown to the second place, the alarm time does not match the watch set time. How can I correct this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 184 Answers

Imbahe,

Here is the procedure to make the alarm time match the you you have set for the main watch time:


2. ALARM HAND ADJUSTMENT

Hour hand Minute hand

B

ALARM

hour hand ALARM minute hand

B Press repeatedly to set ALARM

hands to the time indicated by the

main time hands.

? Set the ALARM hands to the time the main

time hands indicate.

* The ALARM hands move quickly if
button B is kept pressed.

Then press the crown all the way in when finsihed.

Your watch is caliber 7T62. You may download a complete settings instruction manual for this caliber here:
http://www.seikowatches.com/support/ib/index.html

The instructions you need are on page 3 of the manual. I hope this will fix your problem with the adjustments. If you need more help, please let me know.
Regards, Bill

Posted on Sep 16, 2010

Testimonial: "Bill was "Spot On" with his well laid out explanation. Thanks for getting me straightened out! The link to the instructions was fantastic too!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set the day of the week


here is your manual (I think)
http://cdn.invictawatch.com/invictawatch/website2014/webroot//uploads/manuals/2-8040n-pdf

If not, their site is pretty good.

http://invictawatch.com/service/view-the-instruction-manuals

nice video but as good as a chocolate teapot!

https://youtu.be/iv0aXQNH4yY


anyway, here is your info

Invicta Watch Setting Instructions By Ashley Brown eHow Contributor Found This Helpful A watch is only useful if it displays the correct time. Over time, your watch may display the incorrect time as the battery wears down. After installing a new battery, you will also need to reset the time. All Invicta watches have similar instructions for setting the time. Setting the time does not require any tools or equipment.

Other People Are Reading

Watches with Time Only
  1. Pull out the crown. The hour and minute hands will stop.
  2. Turn the crown until the hour and minute hands are positioned on the correct time.
  3. Push in the crown to start the watch.
Watches with Time and Date
  1. Pull out the crown to the first position. The crown can be pulled out to two different positions. Pull gently once to reach the first position.
  2. Turn the crown until it reaches the correct numerical date.
  3. Pull out the crown to the second position.
  4. Turn the crown until the hour and minute hands correspond to the correct time.
  5. Push in the crown twice. It should now be resting firmly against the watch, in its original position.
Watches with Time, Day and Date
  1. Pull out the crown to the first position.
  2. Turn the crown to reach the correct day.
  3. Turn the crown clockwise to reach the correct date.
  4. Pull out the crown again to the second position.
  5. Turn the crown until the hour and minute hands display the correct time.
  6. Push in the crown twice so it rests against the watch. The crown should be back in its original position.


Read more : http://www.ehow.com/how_7352591_invicta-watch-setting-instructions.html

Sep 13, 2015 | Invicta Watches

1 Answer

How do I change the day, date etc on a GENEVA 7391 watch


read the instruction manual, Geneva Watches with Two or Three Hands
  1. Pull the crown out until you feel a click.
  2. Turn the crown counterclockwise until you have the correct time.
  3. Push the crown back in to set the time.
Geneva Watches with Two or Three Hands and a Date Window
  1. Pull the crown out until you feel two clicks. This second click position allows you to set the time.
  2. Turn the crown counter clockwise until you have the correct time. Push the crown all the way in to set the time.
  3. Pull the crown out until you feel one click. This first click position allows you to set the date.
  4. Turn the crown counterclockwise until you have the correct date. Push the crown back in to set the date.
Multi-Function Geneva Watches
  1. Pull the crown out until you feel two clicks. This second click position allows you to set the day.
  2. Rotate the crown counter clockwise until you have the correct day. Push the crown in to set the day.
  3. Pull the crown out until you feel a second click to set the time or the 24-hour hand.
  4. Turn the crown clockwise until you have the correct time, then push the crown in to set it.
  5. Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.
Geneva Chronograph Watches
  1. Pull the crown out two clicks. This second click position allows you to set the time.
  2. Turn the crown clockwise until you have the correct time, then push the crown in to set it.
  3. Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.
  4. Stop and start the chronograph by pressing the PA button, located above the crown.
  5. Reset the chronograph by pressing the PB button just below the crown. The PB button returns the chronograph second and minute hands to their original positions of zero.
Automatic Geneva Watches
  1. Wind the mainspring by turning the crown 15 to 20 times clockwise.
  2. Pull the crown out until it clicks.
  3. Turn the crown counterclockwise until you have the correct time, then push the crown in to set the time.
Tips & Warnings
  • Do not set the date or time between 8 p.m. and 3 a.m. to avoid damage to your Geneva watch. The gears sit too close together during these times.
  • If your Geneva watch becomes wet, wipe it dry as soon as possible. Keep your watch away from saunas and hot tubs, as the extreme heat diminishes the watch's water resistance.




Read more : http://www.ehow.com/how_6134550_set-date-time-geneva-watch.html

Jul 13, 2015 | Geneva Watches

1 Answer

How do I set the alarm on model wau111a tag watch


  • Pull out the crown to the alarm setting position. The crown is located on the right side of the face of the watch. Pull the crown out until "AL", the alarm indicator, is shown on the watch. Depending upon the model of your Tag Heuer Aquaracer watch, you will either pull the crown out in the first or second position.
  • Select the hours and minuets for the alarm. Once your watch is in the alarm setting position, press the bottom right button on your watch. This will enable you to select the hours and minuets that you want to set the alarm for.
  • Set your alarm. To begin setting your alarm turn the crown clockwise until the desired hour or minutes are displayed on your Tag Heuer Aquaracer watch. If you happen to accidentally pass the alarm time, turn the crown counter-clockwise the get back to the desired alarm time.
  • Save your alarm. When you are ready to save your alarm, simply push in the crown. Once your alarm sounds, to silence it press any button on your Tag Heuer Aquaracer watch.

  • Nov 06, 2014 | Tag Heuer Link Watches

    1 Answer

    I've lost the owner's instructions and need directions for setting the alarm.


  • Unscrew the crown (the main knob on the center right side of the watch casing), wait until the second hand is at the 12 o'clock position, and pull the crown knob up so that it clicks once.
  • 2 Press the button below the crown knob repeatedly until the hands of the alarm dial point to the time within the next 12 hours that you want the alarm to ring. Pressing the button once will move the alarm one minute forward. Pressing and holding the button will move the alarm forward quickly.
  • 3 Pull the crown knob one click further out and turn to adjust the main hands to the correct time, to take into account the time you took to set the alarm.
  • 4 Push the crown knob two clicks back into its normal position, and screw it into place until it locks.
  • Aug 20, 2010 | Pulsar PXH225 Watch

    1 Answer

    Help needd to find out how ro set Alarm on my Bulova Millennia 98A48. A users guide would be appreciated. I have lost mine.


    Pull out the winding stem (crown) when second hand reaches 12 o'clock, set main time by ajusting stem, next press and hold A button "near 9 o'clock" hands will move quickly, when close to matching main time, release A button and press in and out quickly until it matches main time. Next push winding stem in, this will start the main and the sub-hands together for normal time. To set alarm press and hold A button until set time is reached, select B button alarm mode "2 o'clock" for beep or vibra, to turn alarm on/off press C button "4 o'clock" for 1 or 2 seconds, the sub hands will move rapidly until it reaches normal time and alarm will sound 3 times indicating it is set, finally when alarm goes off early in the morning for example you can press any button to stop. To reset alarm press C and it will go back to the original alarm setting.

    I have a spare set of instructions if required.

    Aug 07, 2010 | Bulova Millennia With Vibra-Alarm 98A48...

    1 Answer

    I need instructions on setting the alarm for the Pulsar Chronograph 100M. I'm able to set everything else. Your response is greatly appreciated. THANKS!!


    I answered this for different Fossil watch post, but I believe it will be the same for your watch.
    I'll re-post the answer below.
    ------

    To set the alarm on these models of Pulsar watches, do the following:
    Looking at the face of the watch, there are two buttons and a crown on the right side. The TOP button is Button "A". - The BOTTOM button is Button "B".
    There are 3 positions on the crown: IN (#0), FIRST CLICK (#1) & SECOND CLICK (#2). 
    The small dials located at the bottom of the watch face (6 O'clock) are the alarm minute and hour dials.

    First, pull the crown out to the second 'click' (position #2) ... This is all the way out. (STOP THERE! Pulling harder will harm your watch! Don't try to pull past position #2!)
    Second, set the correct time. (plus one or two minutes... time to complete this.)
    Third, with the crown still out to position #2, push button "B" (bottom) until the alarm minute and hour hands are set to the present time (same as the large dials).
    Fourth, push the crown all the way in- to position #0.
    The current time on the large dial should read the same as the small alarm 'time'. {This is the CURRENT TIME, not the alarm SOUND SET.}
    To set the alarm SOUND time, pull the crown out to the first click (position #1).
    Push button "B" until the dials of the alarm are at the time you want the alarm to sound... It can only be set within 12 hours! ... It does NOT know "am or pm".
    When the desired time is set for the "alarm sound", push the crown all the way in (position #0).
    The alarm dials will now indicate the time for your alarm to sound, NOT the current time. (this way, you know that the alarm is engaged.)
    To reset the alarm- or disable it, pull the crown out to the first click (position #1) and hold button "B" down until the dials advance and stop at the current time... it will stop at the current time- then release button "B". --- Push the crown back in (position #0) and the alarm will now be disabled.

    If the alarm dials are always moving and at the current time, you know that the alarm is disabled.
    If the alarm dials are stationary and not moving with the time, you know that the alarm is engaged and set to the time shown.

    I hope this helps.

    Nov 05, 2009 | Pulsar Chronograph Watch

    1 Answer

    How to set a invicta 3443 watch up


    To set the time pull the crown out to the first position and set the time by turning the crown. Pull the crown out to the second position to set the date. Since this is a diver model you will need to unscrew the crown before it will pull out. Make sure you replace the crown and screw it back down for a good protective seal.

    The alarm sets the same way. Unscrew the button to set.

    Nov 24, 2008 | Invicta Pro Diver Collection Grand Diver...

    1 Answer

    How to adjust alarms


    moz-screenshot.jpgSetting the alarm:

    1. Pull the crown to the 2nd "click" (the possition you adjust the time) (Carefull: The seconds hand has to be on "12")
    2. Press repeatedly button "B" to set ALARM hands to the time indicated by the main time hands (The ALARM hands move quickly if button B is kept pressed)
    3. Push the crown to normal possition
    4. Pull the crown to the 1st "click".
    5. Press repeatedly button "B" to set the desired alarm time. (The ALARM hands move quickly if button B is kept pressed)
    6. Push back the crown in to normal position.

    At the designated time the alarm rings for 20 seconds, and it is automatically disengaged as it stops. To stop it manually, press button A or B.

    Oct 15, 2008 | Seiko Le Grand Sport SDWF73 Wrist Watch

    3 Answers

    How to Set Alarm


    This is the movement used in the following Seiko watches..
    SNAC74 SNAC75 SNA548 SNA694 SNAC40
    SNAC41 SNAC42 SNA749 SNAC03 SNA411
    SNA414 SNA765 SNAA03 SNAA05 SNAA01
    SNAA02 SNAA61 SNAB61 SNAB62 SNAB64
    SNAB65 SNAC25 SNAC29 SNAC35 SNAC36
    SNAA61 SNAC38 SNA283 SNA695 SNAA30


    HOW TO SET ALARM TIME
    1. Pull the crown out to the second click position.
    2. Press button “B” to set the alarm hour and minute hands to
    current time.
    3. Push the crown back to normal position.
    4. Pull the crown to the first click position.
    5. Press button “B” to set the alarm hour and minute hands to
    desired alarm time.
    6. Push the crown back to normal position.

    Note:
    Alarm setting on a 12-hour basis only. Alarm will ring at the
    designated time for 20 seconds; one time alarm only. The alarm
    needs to be reset in order to re-engage the alarm function.

    HOW TO USE CHRONOGRAPH
    1. Set crown at normal position.
    2. Press button “A” to Start/Stop/Restart.
    3. Press button “B” to Split/Split release/Reset.

    HOW TO USE ALARM DIAL
    AS DUAL TIME DISPLAY
    1. Pull the crown out to the second click position.
    2. Pres the button “B” to set the hour and minute hands to time of
    a different time zone.
    3. Push the crown back to normal position.

    Nov 27, 2006 | Seiko Coutura SNA341 Wrist Watch

    3 Answers

    Small hand on Millennia not keeping time


    From your book, start from square one. Second hand to 12 Pull crown to stop second hand.Set sub hands to duplicate main hands (correct time) Push crown in. I'm not that clever , I got the jeweler to do it for me.

    Nov 03, 2006 | Bulova Millennia With Vibra-Alarm 98A48...

    Not finding what you are looking for?
    Seiko Coutura SNA341 Wrist Watch Logo

    606 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Seiko Watches Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Vernon Taylor

    Level 3 Expert

    2929 Answers

    Brad Brown

    Level 3 Expert

    15478 Answers

    Are you a Seiko Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...