Question about HP Color LaserJet 2600n Printer

1 Answer

My printer is 2600n, after printing at printed page there is a ink leaking line from up to down 2 inches wide couldnt solve the problem can you help pls

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,218 Answers

You could carefully clean this as follows:
put the printer on some newspaper to avoid further spills.
Turn on the printer, then open the lid to allow the carriage to move to the center.
Now unplug the printer, then gently move the carriage to the left and out of the way.
You should now have limited access to the spittoon area.
You can clean this area by carefully scooping out the ***** of ink with a plastic spoon. (Be careful not to drop ink sludge on your printer, desk, carpet or clothing.)
Once most of the ink has been removed then use a crumpled paper towel to soak up the ink in the bottom of the service station.
It may take several rounds of this to clean up the service station.
It is not necessary to completely clean the service station, just get the majority of the ink out.
Once this has been completed you could turn the printer up and clean the bottom area of the printer. Do not tip up the printer before the service station has been cleaned or you are likely to create a mess....
hp printer ink cartridge

">

Posted on Oct 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp laserjet 2600n printer creates 1/2" wide band that you can almost see the print...like it is not getting toner in black color.


This often happens when cartrage has run past changing point. remove cartrages starting at top and CK for ink. Run cleaning page until clear

Jul 04, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Printer ignores white space at beginning of document


0c2c2cf.jpg 437e2b1.jpg
by dragging the black bar on the left with your mouse when
the cursor changes for resize

Nov 30, 2007 | Office Equipment & Supplies

1 Answer

OkiC5200 has an inch wide faded print line down the left side


It might be a dirty led assembly. The leds hang down from the top when it is opened.

May 03, 2009 | OKI C5200n Laser Printer

1 Answer

4 - black ink smudges (1/32" wide x 1/16" high) in right margin


Very nice trouble shooting. The image defect you describe point to the OPC or drum unit this is essentially the toner cart. In your case black. Measureing the distance between repetitive defects is a sure way of diagnosing problems such as yours. Again nice work.

Google repetitive defect ruler for your model to help in the future.

Hope this helps

Apr 07, 2009 | HP Color LaserJet 2600n Printer

1 Answer

I am getting a faint line all down the page


Most likely you have a defective black toner cartridge. Open the front shutter on the black toner and look at the drum. If you see the drum has toner on it corresponding to the line down the page, you found the problem. If you can't see anything on the drum try printing a page and then interrupting the printout while the page is still in the printer. If you see the line on the page before it goes through the fuser, (the last roller thing on the top of the printer) then it still is the toner cartridge. If it occurs only after the fuser then it, the fuser, is at fault.

Jun 29, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Printer prints about three inches down the stops


no solution yet. cant afford your services but thank you anyway.
beeharmon2@netzero.net

Jun 26, 2008 | Office Equipment & Supplies

1 Answer

Black line on back of page


It sounds like you have a black ink leak and it is smearing onto the paper when you print. I don't know any reasons for this except if you topped the black ink up yourself, and didn't re-block the hole you made. Then I guess the ink would gravity drip onto the paper tray while you weren't printing. Otherwise I would suggest changing the print head, but this might be expensive.

Dec 28, 2007 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

HP 2600N dark gray line down the left side


Maybe your transfer belt is damaged. If u have an spare belt replace it for a test. Answer me if it dont work. Maybe i can get an support manual for u. I work in a HP partner company.

Good luck

Dec 15, 2007 | HP Color LaserJet 2600n Printer

1 Answer

Keeps printing Demo Page after each print.


check if one of the buttons are not stuck down

Dec 05, 2007 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...