Picture My picture is somewhat blury and poor color quality. What is wrong with it?

By poor color quality, do you mean that if you turn the color control all the way down, the black and white picture is more like black and red, green or blue - or do you have a good black and white image? If the B&W image is good, and the TV is an old (8+ years) one, maybe the mirror inside the set needs a good cleaning - especially if there are smokers in the room. If you have a B&W picture that is tinted, then you may have to go into a service menu to adjust it back to a better picture. Hard to guess the problem without more specific description of symptoms.

The red clock indicates that the date and time need to be set.
As for the "poor" quality, there are many possibilities. If the colors are wrong, the most likely culprit is an improper white balance setting. If the pictures are blurry, that could be caused by subject motion, camera motion, improper focus, or a combination of the three. If pictures taken with the flash are too light or too dark, that could be because the subject is outside of the flash's range. Without knowing what you mean by "poor" I can't give you anything more than some ideas.

Mine too. I think these things are JUNK!!!

hi,
you must have a lance problem,so please contact any authorised person for repairs , its may be a lance flap is cracked,

Adjust the driver settings and you will have success.

The lamp would make you picture dark.The colorwheel will affect color quality.If brightness is an issue = lamp.If color is the issue = Colorwheel.

replace the coolant in the CRts. Very common problem with the older rear projection tvs. You can get the coolant replacment kit at the following link which contains the coolant and instruction CD.
http://servicemanuals.vstore.ca/

Many times this is caused by a dial-up accelerator program. These function by reducing the quality of the picture, resulting in smaller files and thus faster internet because there is less data to transfer. But the resulting pictures are often very poor quality.

If there is an accelerator, there will be a way to reduce the degree of compression or to disable it completely. You will have slower internet but better pictures.

My Logitech Quickcam for notebooks Deluxe webcam was blurry.

I spent 3 hours surfing the net looking for the answer, only to find a load of vague and technical responses about OS's and other ****. I fiddled about with the focus ring around the lens on my cam, which wouldn't move, so i figured i had an inferior version that had some sort of in-built auto-focus.

Eventually i lost my rag with the poor quality of information i was finding on this issue.

I went downstairs, got my pliers out of my tool bag, and wrenched the lens ring.

It moved.

Camera focused.

Job done.

Voila, no techy **** required.

hotoPC 650 captures images in 24-bit color (16.7 million colors). Your pictures will not display maximum image quality if your monitor or computer's video controller doesn't support this color depth. Additionally, if your pictures are taken in 1154 x 864 mode, try increasing your video resolution above 640 x 480. You may need to upgrade your system to achieve the best possible image quality. If your pictures look better on the screen than when you print them out, you may need to upgrade your printer. An EPSON Stylus ink jet printer, for example, provides excellent image quality. If you used drag and drop to insert your pictures, they may appear grainy. Try importing them into your documents instead.