Question about Exercise & Fitness

2 Answers

I have a Freespirit treadmill model 909. It turns on and the track runs, but clicks off after just a few seconds. It was working fine until then. Now it does it every time I turn it on. What could be the problem?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Http://www.youtube.com/watch?v=TuWLRJiedpw

Posted on Mar 04, 2011

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It sounds like the speed sensor is not close enough to the magnet, or the speed sensor is bad. it is located inside the motor area, next to the pulley on the front roller. well depending on what treadmill you have. it can be shaped like a pencil but shorter. make sure it is about a centimeter away from the magnet that ison the flywheel. once you have moved it turn on the treadmill and try it, if it doesnt work then move the belt with your foot and every time the magnet goes past the sensor you should see a light flicker on the control board if not then the sensor needs to be replaced.

Posted on Jan 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to enter into calibration mode for treadmill Freespirit model 122 30521..


Of you wish to get some details about treadmill repair service mode and calibration then check the following link
http://electro-medical.blogspot.com/

Jan 15, 2016 | Nautilus Exercise & Fitness

1 Answer

Treadmill stops abruptly i have to reset button then go again for a few minutes


Find out what is overheating it. Most likely something jammed into one of the rollers.

Feb 19, 2015 | Free Spirit FreeSpirit Model 30516...

1 Answer

I had bought a second hand freespirit treadmill and do not know how to program for first time using. I need a manual instruction


"Free Spirit" is the brand name Sears uses. That does not tell us who the manufacturer is. They have machines made by a number of diferent companies. The model number is required.

Feb 29, 2012 | Sears Exercise & Fitness

1 Answer

I have a Freespirit Treadmill...Model l# JM05-001. I was using it and it just shut off giving error message E1. I turned it off and restarted it. Belts are working fine and did not use incline. It runs...


Don't laugh, but I'm working with an old Athlon Simplicity model to try and adapt the motor to a band saw. In any event. There is a magnet imbeded on the outside of the front belt roller. It triggers a circuit that counts the revolutions. There should be a small postage stamp sized black plastic piece near the belt roller that has two wires running to the circuit board. It may have come unplugged somehow. When I unplug mine - the motor stops and it displays E1.

Jan 15, 2011 | Sport & Outdoor - Others

1 Answer

I have a Nordtrack viewpoint 3000, the tv will come on and when I touch the start botton it just beeps.


I had the same problem with my Nordic track. I pressed every button until I found the one that did not beep. The one that does not beep is stuck. My problem was with the Ifit button. The first few times I would push the bad button until it started beeping. That worked for awhile (couple of weeks but started up again). I disconnected the Ifit unit and now the thing work fine except for Ifit which I never used. Nordic track wanted to sell me a new console which cost more than the machine.

Aug 22, 2010 | Nordic Track NordicTrack Treadmill, A2550

2 Answers

Freespirit Treadmill


Did you try it before you bought it and it was working. when you move the unit and pluged it into the wall outlet was it on? if yes then you may have damaged the lower board. If you can not get that part then the treadmill has died. Is it a Bowflex or a Free spirit.

Nov 21, 2008 | Bowflex Treadmill Series 7

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

34188 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...