If you cannot log into your router because you have forgotten the router password or your network has been hijacked, please refer to "Lost or forgotten password for router or other device" below.
1.Connect your computer to the router with an Ethernet cable .2.Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.3.From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.From the center screen, select your encryption type from under the Security Options heading.
If the wireless network passphrase is visible, review it and use it to log devices onto your network.If it is not visible, you can change your wireless passphrase;If you cannot log into your router:
Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.
NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!
To reset the password /router follow the steps below:
Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)Release the button.Wait for the router to reboot.Log in with the default password.If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
Unplug the router's power.Press and hold the reset button. While the button is held down, reconnect router's power.Continue to hold the reset button for 20 seconds after reconnecting the power.Wait for the router to reboot.Log in with the default password.
For more information see the link below:http://support.netgear.com/app/answers/detail/a_id/9665
Also refer to router's users manual >The manual is available online >Click this link ->http://support.netgear.com/app/products/family/a_id/1296
Select the right WGR614 >>Next click Documentation > click on the router's setup manual to start downloading ..
Please let me know if you need further assistance on this issue .