Question about Blueant Supertooth Light Bluetooth Speaker Car Kit

1 Answer

BlueAnt ST3 will not turn off - can hold green MFB for over a minute unit will not shut down.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

If you can put the music back on than reset it if not let it die and charge it on the computer and save the files reset then transfer the files back to the device i hope i explained that clearly enough

Posted on Sep 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My new iphone 4 wont connect to my blueant st3 device. I know how to pair it and have followed the process on both the phone and st3, but the phone simply keeps searching in Settings - Bluetooth and the...


To connect iphone 4 to Blueant when its not responding, try turning off the Blueant using the Green MFB. Once it has powered down hold the green MFB and either one of the volume control buttons until a siren sound goes off. The voice will say a few things and then it should be reset. Turn off again and then back on again and it should be ready to discover your phone.

Feb 17, 2011 | Cell Phones

2 Answers

Is Blueant ST3 Compatible with the iPhone4


Any bluetooth device should work with the iPhone4. Here is the directions for "pairing" from the BlueAnt website.
  1. Make sure the Supertooth 3 is turned off. You can tell if the Supertooth 3 is on or off by looking at the light on the front. If the light is on or flashing, then the Supertooth 3 is on: turn it off by holding down the Multi-Function button (the green button) for about 5 seconds, until you hear the voice announce that the Supertooth 3 is powering down.
  2. With the Supertooth 3 off, hold down the Multi-Function button for about 6 seconds, until the light on the front of the unit starts flashing red and blue.
  3. The Supertooth 3 will now prompt you to select your language: press the Multi-Function button when you hear your language spoken.
  4. The Supertooth 3 is now in pairing mode.
Pairing Your BlueAnt Step 4: Apple iPhone Now you need to use your iPhone to search for Bluetooth devices:
  1. Select Settings.
  2. Select General.
  3. Select Bluetooth.
  4. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  5. If you are prompted for a PIN, enter 0000 (four zeros).
  6. Select Connect.
Your BlueAnt device is now paired.

Jan 08, 2011 | Blueant Supertooth 3 Bluetooth Handsfree...

1 Answer

Im trying to pair my iphone with my blueant but it keeps saying (make sure blueant st3 is turned on in range and ready to pair)


First off the device you are referring to is a ST3 and not a Z9. What you need to do is put the device into pair mode prior to searching in your iphones bluetooth menu, to do this with the device off hold down the green button until you hear a language loop. When you hear the language of your choice let go of the green button and press it once right away. You will hear a message about your phones bluetooth menu, when you hear that go to your Iphones bluetooth menu and select the ST3 and it should work.

Regards,

Rylan

Dec 04, 2010 | Blueant Z9 Wireless Headset

1 Answer

How do you turn it off?


To power off the device, hold down the MFB (green button) until you get a message "BlueAnt ST3 Powering down".

Rylan

Nov 30, 2010 | Blueant Supertooth 3

1 Answer

I cannot hear my calls, even though I have connection


I would like you to delete the pairing from you phone and then remove the battery from your phone while the phone is still on.

Once the screen has gone completely blank, power the phone back on.

On the ST3 from the off position. Hold the Volume up Button down and then press the Green MFB button for 1 second. This will reset the device.. Leave the ST 3 for about Ten seconds, then after 10 seconds repair the ST you're your cell phone. To do this hold down the green button with the ST3 off until you hear a language loop, when you hear the language of your choice let go of the green of the green button and press it once right away. You will hear a message about your phones bluetooth menu, when you hear that go back to your phones bluetooth menu, search/scan for devices, select the ST3 and enter the pin code 0000 if prompted.

If you still experience issues I would suggest testing the device on another model of phone to see if the issue carries across, this will allow us to isolate the source of the issue at hand.

Rylan

Nov 21, 2010 | Blueant Supertooth 3 Bluetooth Handsfree...

1 Answer

How do I restore factory settings on my BlueAnt ST3. I have a new Blackberry and every time I try to pair them the Blackberry comes up with 'Unable to pair with BlueAnt ST3. Try again?' and every time I...


Here is how I got my Samsung to pair (on page 12 of the Blue ant manual):

Deleting all Paired Devices & Phonebook entries:
1. Ensure the SUPERTOOTH 3 is switched OFF, press
& hold the Volume Up (8) Button.
2. Whilst holding down the Volume Up (8) Button, press
the MFB (1) for 1 second or until a distinctive melody
is heard through the speaker, the software version will
then be announced. Once this occurs, please switch the
SUPERTOOTH 3 off for a minimum of 10 seconds.
All paired devices & phonebook entries have now
been erased.

Go back in and pair your phone, use pass code 0000 and let it reload your address book and you should be good to go

Sep 29, 2010 | Computers & Internet

2 Answers

Having trouble pairing phone with Blue Ant ST3


  1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
  2. Hold down "Vol " and the green Multi-Function button until you hear a loud siren/distinctive tone.
  3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
  4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.
You will now need to re-pair your phone with your Supertooth 3.

Apr 17, 2010 | Blueant Supertooth Light Bluetooth Speaker...

6 Answers

Blue Ant ST3 will not recognize 0000 passcode.


  1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
  2. Hold down "Vol +" and the green Multi-Function button until you hear a loud siren/distinctive tone.
  3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
  4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.
You will now need to re-pair your phone with your Supertooth 3.

Jun 11, 2009 | Blueant Blue Ant 091193 Supertooth II...

3 Answers

My g3 iphone says blue ant st3 password incorrect but it's the only one they give you...won't connect with my phone


Hi - I had the same problem setting up my 3G S. Here's the solution. In "Settings/General" set the Bluetooth to "ON". Turn your ST3 OFF by holding the green button until she says it's Powering Down. Now press and hold the green button ON until Language Selection (British English) option. Select language by pressing green button again. Next she will say "Device Found-Paring Successful-Enter password 0000". Enter 0000 and your phonebook will start downloading. There ya go!

Jun 07, 2009 | Blueant Blue Ant 091193 Supertooth II...

1 Answer

Can not pair with my new Blackberry storm - Help???


Make sure the BlueAnt Supertooth 3 is turned OFF.
  1. Press+Hold the Volume Up button and then also press the green button to reset the unit.
  2. After completing the above reset, turn the ST3 OFF again and wait at least 10 seconds.
  3. Turn unit back ON and select language when prompted.
  4. Follow the voice prompts and pair the ST3 with your blackberry as normal.
  5. After pairing has completed you will hear the ST3 announce “loading phonebook – please wait”.
When your blackberry ask your permission to allow bluetooth to connect and donload phonebook allow it permanently.

May 04, 2009 | Blueant Supertooth Light Bluetooth Speaker...

Not finding what you are looking for?
Blueant Supertooth Light Bluetooth Speaker Car Kit Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blueant Radio Communications Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Blueant Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...