Question about Minolta C350 Printer
Fusing drive motor failure, replace the fuser recently? (THE HOT PART) there is something jammed the fuser can't turn, orange looking rollers about 12" long, on the right side of the machine. above the transfer belt. Hopefully the motor is not burned out worse case the moor is burned out and that took the control board $$$$$$$$$$$. Open close the front door to reset
Posted on Nov 21, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
C0B4C Finishing option Exit Motor malfunction
Try reboot holding utility key down and do trouble reset, if it doesn't help then there is something wrong with exit motor, call for service
Posted on Dec 07, 2007
Im thinking either it was moved improperly and the image units werent kept level, or maybe just sitting to long caused them to settle in. try (gently) removing the IU's and shaking them (keep them level) in order to unclog or redistribute the developer inside. (imagine sand in a horizontal tube. It has to be uniform all the way accoss the tube, and not settled into any one location)
Posted on Jun 09, 2009
Go to konicaminolta web site and download a mac driver. and install it to Imac. Make sure to download OS10.4 or higher.
Posted on Jul 09, 2009
Transfer belt code C096 mite try open and closing the front door where you put the toner. Also remove the image transfer belt and then reseat it.
Posted on Jul 19, 2009
Tips for a great answer:
Jun 18, 2014 | Konica Minolta bizhub 350 All-In-One Laser...
Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...
Sep 23, 2009 | Konica Minolta Office Equipment & Supplies
Apr 10, 2009 | Minolta Office Equipment & Supplies
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: