Question about Gateway 7326GZ PC Notebook

1 Answer

How do i restore my gateway 7326gz to factory settings? I have tried alt/f10 and alt/f2 on restart but neither gives me a restore prompt.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

From a cold boot after you push the start button start tapping f11 it should start your recovery console if it works give me a vote

Posted on Sep 16, 2010

  • 7 more comments 
  • tjball100 Sep 17, 2010

    no, f11 doesn't work either. i have tried all the "f" keys. I can get to a "bios setup" menu and a "boot" menu, but neither of them gives me a prompt to restore the computer.

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode.

  • ren1221 Sep 18, 2010

    it might not have a copy of all the rebuild softaware you might have to buy the restore disks from gateway they usally cost about twenty dollars then you just put it in your drive and cold boot your computer it should go into rebuild mode.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i restart Gateway e1 vision amd fully clearing everything from the login and f8 and f11 will not work


The way to restore Gateways is to hold down the ALT Key and repeatedly hitting f10 then it should bring you to a boot sequence screen then choose the HDD and then hold down ALT and repeatedly hit f10 again.
That should prompt the restore feature for gateway.
with a "Restore from factory default" option. This loads the system partition (C:) from the recovery partition (hidden). It does wipe every thing out on the C: drive to be like it was when new.
If that doesn't work the only way to do it is to boot into windows and run the eRecovery program

Feb 20, 2015 | Gateway Computers & Internet

1 Answer

How do I do a factory reset on my Gateway DX43803G-UW308, I have no disks...


Restore for gateway desktops
The way to restore Gateways is to hold down the ALT Key and repeatedly hitting f10 then it should bring you to a boot sequence screen then choose the HDD and then hold down ALT and repeatedly hit f10 again.
That should prompt the restore feature for gateway.
with a "Restore from factory default" option. This loads the system partition (C:) from the recovery partition (hidden). It does wipe every thing out on the C: drive to be like it was when new.
If that doesn't work the only way to do it is to boot into windows and run the eRecovery program

Restore to factory setting with gateway Solved Closed

Feb 17, 2015 | Gateway Computers & Internet

1 Answer

How do I reset to factory settings


Restore for gateway desktops
The way to restore Gateways is to hold down the ALT Key and repeatedly hitting f10 then it should bring you to a boot sequence screen then choose the HDD and then hold down ALT and repeatedly hit f10 again.
That should prompt the restore feature for gateway.
with a "Restore from factory default" option. This loads the system partition (C:) from the recovery partition (hidden). It does wipe every thing out on the C: drive to be like it was when new.
If that doesn't work the only way to do it is to boot into windows and run the eRecovery program

Sep 15, 2014 | Gateway Computers & Internet

1 Answer

I want to reset my gateway kav60 back to factory


Gateway no longer offers the drivers. If you have a Restore Partition on the hard drive, try pressing Alt+F10 and follow the prompts. If you have any important files (pictures, documents, etc,) be sure to back them up as a Factory Restore will delete them.

Jul 15, 2014 | Computers & Internet

1 Answer

Im trying resore my acer back to factory settings


Did you press 5 times

If you do NOT have a copy of this disc, skip to step 3 for further instructions. Once you restart your computer, a screen will appear with the words. Press Any Key to Boot From CD. Once you press a key, a screen will come up containing instructions to format your hard drive and restore the original factory settings. Follow the on-screen prompts to finish the installation. Once the restore is complete, remove your Recovery CD from the disk drive so that your computer does not try to boot from the CD again. Restart your computer to complete the restore. 3. If you do not have a System Restore disk, then your computer should have a recovery partition on your hard drive, separate from the main partition of the disk. Unplug all external devices and restart your computer. When the loading screen comes on with the Windows logo, press Alt+F10 together five times. This will bring up the system restore menu. Follow the on-screen prompts to restore your computer back to the factory settings Hope this helps.

Jan 20, 2013 | Computers & Internet

1 Answer

Need to restore my gateway sx2800-02h to factory settings


Hi.

  1. Restart the computer.
  2. When the Gateway logo appears on the screen, press the Alt and F10 keys repeatedly.
  3. When prompted with a boot screen, hit the Enter key.
  4. After the system recovery program has loaded, follow the prompts to reinstall the operating system.

Regards.

Jan 01, 2013 | Computers & Internet

1 Answer

Alt F10 to get to restore factory settings is not working


Click on the Start menu. Then, select all programs, Acer Empowering Technology and Acer eRecovery Management.


If this is the first time you have opened the program it will prompt you to set up a password and create a backup CD.


Click the Restore button and select the option that reads "Restore system to factory defaults".


Wait for the computer to finish the restore process and reboot.


Restoring for the Boot Screen

If your computer will not boot up properly, you can attempt to reach the restore option by pressing the Alt button and the F10 button at the same time.


When the eRecovery menu appears, choose "restore system to factory defaults".


Wait for the recovery process to complete and the computer to restart


hope this helps

Sep 29, 2012 | Acer Aspire One PC Notebook

1 Answer

I am trying to restore an Acer Aspire 5515 laptop to factory settings but alt f10 doesnt do anything and i cant find anything other than backup and restore. I dont want to restore it to any previous date...


This is for windows7 : As the laptop boot up press F2. When prompted press F8. Then choose "repair computer". from there you should know what to do.

May 24, 2011 | Computers & Internet

2 Answers

How to reboot my gateway nv53 laptop to factory without a cd bought this laptop used starting to have problems so i want to erase everything and make it like new


Hi.

The laptop may have a hidden recovery partion which you can access from boot up. Turn the laptop off and then restart it. When you see the Gateway logo hold down Alt and repeatedly press the F10 key. From there follow the on-screen instructions to restore the laptop to factory defaults, it should take about half an hour but could be longer.

Remember to back up any data that you want before you restore the system.

If you can't access the recovery partition then you can use Windows to do it for you. Click on the Start Menu> All Programs>Gateway and then Gateway Recovery Management. In the Gateway Recovery window click on Restore and then select Restore System to factory default and follow the on-screen instruction. The computer will restart and proceed with the restore.




Regards.

Apr 27, 2011 | Computers & Internet

1 Answer

Hi i have a gateway mt6705, trying to restore to new. push the on button and gateway comes across the screen. then goes to a blank screen with a blinking line in top left corner thats it. cant use cd to...


Hi,
The way to restore Gateways is to hold down the ALT Key andrepeatedly hitting f10 then it should bring you to a boot sequence screen thenchoose the HDD and then hold down ALT and repeatedly hit f10 again that shouldprompt the restore feature for gateway. If that doesn't work,the only way to doit is to boot into windows and run the Recovery program.

ALL DATA WILL BE ERASEDON YOUR HARD DRIVE IF YOU PROCEED. YOU WILL NEED TO ENSURE THAT YOU HAVE THEPOWER ADAPTER PLUGGED IN. DO NOT SWITCH OFF OR RESTART YOUR COMPUTER DURINGTHIS PROCESS.

Hope this helps,

Feb 26, 2011 | Gateway MT6705 Notebook

Not finding what you are looking for?
Gateway 7326GZ PC Notebook Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...