Cracked screen hi, my hpone vibrated alot and feel off a desk and now the screen is cracked on the inside and the front screen works but turns on and says verizon wireless and shuts off and repeats over and over

Hi, It also could be BAD capacitors on the back of the TV. Most likely on the main power board. You should not attempt to do this yourself unless you know something about electronics. Please take it to your local repair shop. No, there are no reset buttons to push. If the cost of repair is too much. Go buy a new one. They are alot cheaper now. good luck.

Are your bearings all fresh in your steering stem and front and rear wheels

replace the LCd...

sounds like the bearings. make sure machine is off open door put your hand at the front of the drum at the top then see if you can lift it up and down if there is alot of movement it will most likely be the bearings,or try turning the drum by hand to see if you can feel any vibration or hear any grinding noise.

Try another controller that you know the vibration is working properly. If it works then you know the original controller is faulty. Those wireless controllers have a little motor that vibrates and they can go bad after alot of use, or if they get thrown around, etc.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hello,

Open the external hard drive cover, remove the hard disk inside, and fix it back. Try again and let's see what happens.

If it still does not work, insert the external drive into the computer, feel the hard drive if it spins/vibrate from inside or if it makes a cracking noise.

If it spins/vibrate, it means the hard disk is still working. In that case, you have to get another external drive case/cover.

But if it makes cracking noise, then it means the hard drive is damaged and you need to get another one.

Take care

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hello,

Open the external hard drive cover, remove the hard disk inside, and fix it back. Try again and let's see what happens.

If it still does not work, insert the external drive into the computer, feel the hard drive if it spins/vibrate from inside or if it makes a cracking noise.

If it spins/vibrate, it means the hard disk is still working. In that case, you have to get another external drive case/cover.

But if it makes cracking noise, then it means the hard drive is damaged and you need to get another one.
Best regards

That model of neptune dryer had a problem with the blower housings cracking. When the housing cracks, it binds forward into the blower wheel making a loud "rumble" noise and vibration. If you open the door and manually turn the drum and you hear a rubbing noise and feel alot of resistance, then you have a cracked blower housing and need to replace it. It is not an easy job to replace, so if your not familiar with dryers, you should have a technician replace it. Let me know if you have any further questions. shane

Jack up the front end and put stands under it and block rear wheels. Look at axle boots and see if they are cracked. Try turning wheel back and forth sharply and see if you can hear any clicking. Problem could be outer axle joints. If the boots are cracked or you hear a clicking noise you will have to replace the axle. The axle and boot come as a complete unit. Please let me know what you find out.

have you check? the master cylinder. sometine when you get the rotors cut they dont come out right because they may be warped or to thin. if you did the job yourself you might have put the calipers in on the wrong side. this happens alot . if your rotors front and rear are fine then switch the calipers to the other side.