Question about Inter-Tel Encore Phone
How do I change the phone number for remote notification
I accidentally set everything to clear including the defaults on our phone system at work. I cant get into programming now to change everything back as it deleted password for access to programming function.
Posted on Jun 11, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 02, 2014 | Facebook Social Network
10017, 10154, 10451, 10236, 10463,
10180, 10178, 10171, 11394, 11963
Load the remote with new batteries and proceed.
 Manually turn on the component you want the remote to
 Press and hold the component key (TV,
VCR•DVD, SAT•CBL) you wish to
program. The illuminated ON•OFF key
turns on and remains on. If you release
the component key at any time during the Direct Code
Entry procedure, the illuminated ON•OFF key blinks four
times, and the process is exited.
 While holding down the component key, consult the
Code Lists for the four-digit code that corresponds to your
component's brand and use the number keys (0-9) on the
keypad to enter it. While you are pressing the numbers, the
illuminated ON•OFF key turns off.
 After the fourth number is entered, the illuminated ON•OFF
key turns on. At this time, release the component key. If the
illuminated ON•OFF key turns off, you have entered a valid
code and have followed the correct procedure for Direct
If you enter a code number that is not in the Code Lists or
you do not follow all of the steps for Direct Code Entry,
the illuminated ON•OFF key blinks four times when the
component key is released. This is an indication that a
programming error has occurred. In that case, repeat the
Direct Code Entry process from step 3.
Tip: Throughout the programming of each key, be sure to keep the
remote pointed at the IR sensor of the component you are currently
programming the remote to control.
 To confirm that the component key is programmed with
the correct code for maximum functionality, test the
component. Attempt to control a variety of the component's
functions with the remote. If some of the features of your
components do not work, try programming the remote with
a different code in the list until you find the code that allows
the remote to control the majority of your component's
functions. Different codes can provide different levels of
Sep 03, 2011 | RCA Universal Remote Control
PROGRAMMING REMOTE KEYLESS ENTRY TRANSMITTERS (RKE)
1. Install scan tool
2. Turn the ignition switch to ON - do not start engine
3. Select "Remote Function Actuation" with the scan tool
4. Select "Special Functions"
5. Select "Program Key Fobs"
6. Select the number of key fobs to be programmed
7. Press and hold the LOCK and UNLOCK buttons on the first transmitter simultaneously for approximately 15 seconds. The door locks should cycle (Lock and unlock) to confirm that the programming of the first fob is complete.
8. If you are programming more than one transmitter, repeat the previous step for each transmitter for up to four transmitters in total.
9. Remove the scan tool
10. Exit the vehicle and operate transmitter functions to verify correct programming and operation.
Apr 20, 2011 | 2003 Saturn L-Series
Dec 08, 2010 | Panasonic KX-T7730 Corded Phone
the smart/learn button on the rear of the motor unit near where all
those white wires go. Press and immediately release this and then
walk over to the keypad and key in any 4 digit code you like and
After programming the keypad see if either remote will work with it. Post this information also.
Oct 24, 2010 | Sears Craftsman LiftMaster Chamberlain...
Oct 12, 2010 | 2003 Chevrolet Tahoe
Sep 03, 2010 | NorStar M7310 Corded Phone
Jun 13, 2010 | RCA RCR311B Remote Control
Jan 28, 2009 | Lands Phones
May 20, 2008 | RCA RCR860 Remote Control
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: