Question about Omega Paslode 901000 Impulse Cordless Finish Nailer

2 Answers

I have a paslode straight finish nailer, purchased in Australia around 2001. The problem is that the pin that drives the nail out of the gun does not retract back into the cylinder. I have it apart and the piston seems not to be sliding very smoothly along the cylinder. Thanks for any ideas

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,176 Answers

Is the cylinder really dirty, if so it needs a thorough cleaning. your instruction mnual detailes how to do this. also look for a jammed nail in the nose area and possibly a bent driver.

Posted on Sep 16, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You will find that if the correct O rings are not fitted you are not making pressure, if you push the pin back in with a nail and fire and it works but is not retracting it means the rear O ring is split on not making a good seal. Purchase 2 O rings (buy the correct rings from paslode) cheaps ones will cause you more hassle than its worth, and clean the gun out with the paslode degreaser, wipe it down and lubricate with the paslode oil. put a nice amount around the o rings when you put them on. this should solve your problem.
other things it could be,
Poor gas (bad expiry date) not paslode gas
The firing pin could be bent or could be upside down. This drives the nail but pushes the rob upwards.
I think it will be the back O ring personally but check all parts when you have it apart, also a little oil on the rod support will help.
Hope this helps Jon G Wales

Posted on Jul 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am using senco gas in a paslode 2nd fixing nail gun. Is the senco gas 'bad for' my gun in any way as i am having a few firing problems


You can use most gases in your gun, but paslode is the best that's why its more expensive. Try warming the gases in your pocket that sometimes helps.

Dec 17, 2014 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

GUN FIRES BUT NAIL DOESN'T COME OUT


I am assuming the driver travels down but misses the nail, if so the end of the driver pin may be worn, a quick fix is to touch the end of the driver on a grinding wheel to reface it, ensure you remove the least amount of material possible to maintain the driver length, if this doesn't fix the problem you may need to replace the front plate

Jun 27, 2014 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

My paslode angled finishing gun keeps jamming leaving the firing pin in the out position


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



';';][

Dec 24, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

MY PASLODE NAILER WON'T DRIVE NAILS ALL THE WAY. THE NAIL ARE RINGED.


Hi,
Check the manual for the adjustment..


Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Sep 12, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

My paslode f 16 nail gun wont fire nails,new gas. it actually fires but nails wo nt eject.


i found this happening to me and i oiled (light oil like 3 in 1) the driver (hammer) in the tip. that way it could retract and drive the next brad.

Jul 30, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Were can i buy a instruction manual for a paslode


go to Paslode.com and you can download the manual for free. Let me know if you have any problems

Dec 11, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Paslode shoots a few nails and quits


try a new battery m8 when they have been used fir a while they wear out at the catch and when u fire the nail gun the battery works its way out enuf to stop it making a good contact. Hope this helps.

Aug 11, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

2 Answers

I can't put mt paslode finish nailer back together again


go to Paslode.com and you can download a manual that shows the spring. It sits in a recess under the follower that pushes the nails

Jul 20, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

I have paslode finishing nail gun , i cleaned it, not working now


The smoking is normal for a few times after cleaning ,but you might have put to much oil drops in chamber and piston chamber is getting a "vapor lock". Try recleaning with degreaser. Also have you forgotten to set the depth gauge at front of nose.

Please Rate jj505 Thanks

Mar 23, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Firing pin not retracting far enough to allow nails forward


Yes,this is a common "mis fire" by Pasilode. I own the 16p Framer and the Angle nailer and I never get it from the Framer but I do get it seldom from Trim Gun,nothing you can do ,its just a misfire.

Please rate jj505

Mar 20, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

Not finding what you are looking for?
Omega Paslode 901000 Impulse Cordless Finish Nailer Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Omega Tools & Hardware - Others Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1845 Answers

yadayada
yadayada

Level 3 Expert

77544 Answers

Michael Van Der...
Michael Van Der...

Level 2 Expert

66 Answers

Are you an Omega Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...