Built-In Speedlight (Flash) will not retract
I haven't heard of this problem but compliments of velocityreviews I came up with this.
Follow the instructions below to attach an external Speedlight. Refer to your Speedlight manual for detailed instructions regarding Speedlight operation.
1 Make sure that both the camera and the external Speedlight are
2 Attach the Speedlight to the camera accessory shoe.
3 Turn both the camera and the Speedlight on.
4 Set the external Speedlight zoom head to an angle wider than
28 mm. If you are using a Speedlight with Auto Power Zoom, set the zoom head angle manually. The COOLPIX5700 does not support power zoom.
5 Set the external Speedlight flash mode to TTL.
At this setting, the amount of light produced by the external Speedlight is measured by the camera?s photocell, and the flash shooting range adjusted automatically to ensure optimal exposure. D-TTL flash control
(available with the SB-80DX, SB-50DX and SB-28DX) is not supported.
6 Take the picture
If the Speedlight Options: Speedlight Control option in the SET-UP
menu is set to Auto, only the external Speedlight will fire. If this option is set to Int & Ext Active then the external Speedlight and the builtin Speedlight will fire at the same time.
The COOLPIX5700 does not support AF-assist illumination, or red-eye
reduction using the red-eye reduction lamp on the external Speedlight.
At a setting of STBY (standby), the Speedlight will turn on automatically whenever the camera turns on but will not turn off automatically when the camera turns off.
Exact functionality varies with the Speedlight in use. Refer to your Speedlight manual for details.
I hope it's of some help
Jul 07, 2006 |
Nikon Coolpix 5700 Digital Camera