Question about Computers & Internet

2 Answers

I have a Philips wall jack model number ph69636. and i need to know how to wire it up with a cat5e cable

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Pin Std Phillips
1 White/Orange BLUE
2 Orange Orange
3 White/Green Black
4 BLUE Red
5 White/Blue Green
6 Green Yellow
7 White/Brown Brown
8 Brown White

Posted on Jun 17, 2008

  • ScottMooser Jun 17, 2008


    Here is diagram that explains this further.


×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am using ON-Q RJ45 jacks on the other end of the CAT5e cable and my tester showed pairs 1&2 and 3&4 reversed when using the above diagram. I had to swap Orange&Orange/white pair with the green&green/white pair to correct the problem Thus:
1 White/green Blue
2 Green Orange
3 White/orange Black
4 Blue Red
5 White/Blue Green
6 Orange Yellow
7 White/Brown Brown
8 Brown White

Posted on Jan 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need networking cables, which cables are best for use.


CAT6 cables & jacks are better than CAT5E.
CAT5E cables & jacks are better than CAT5.
CAT5 cables & jacks are better than CAT3.
CAT3 cables have problems going faster than 10Mbit/second.
CAT5 cables support 100Mbit/second, and seem to work with 1000Mbit/second ("gigabit") devices.

Apr 01, 2014 | Computers & Internet

1 Answer

GE Network & Coax Wall Plate has 8 wires of solid colors. My CAT5E cable has 8 wires, only 4 of which are solid and correspond to 4 of the solid colors on the wall plate. The other 4 wires on the CAT5E...


Hello

Your cat5 will make up 4 pair. org/org/wht being one pair and so on.

So as long as you keep them in pairs you will be ok.

Meaning. Pair one from cat5 org and org/wht to wall plate wht and brn.This would be one complete pair.So the wall plate colors are different from cat5 but as long as you stay in pairs and go from left to right on your conections you should be ok.

Jun 05, 2011 | Computers & Internet

1 Answer

Hello I need to hardwire a tripplite n001-010-bl catse cable to a belkin cat5e keystone jack bel-r6d024-ab5e I do not know the correct wiring configuration to do this. Please advise?


The wiring is done as if you are building your own CAT5e wire. See the following URL: http://www.beginnercode.com/2006/11/09/connecting-network-cable-ends/ . There are other sites. As long as both ends are the same the cable will work (unless you want a crossover connection).

For a PDF version see: http://www.n-tron.com/pdf/cat5ecableschemes.pdf .

I hope this helps.

Cindy Wells
(Keystone jacks for ethernet come in two types: plug in RJ-45 and punch down the individual wires with the tool. All of the punch down jacks came with a diagram, had the wire arrangement indicated on the unit, and a cheap plastic punch down tool.)

Jan 17, 2011 | Tripp Lite TRIPPLITE N001-010-BL Snagless...

1 Answer

Need to know what i need to connect my prewired home (with cat5 cable running from box in garage to jacks in 4 rooms) to the internet. currently just have cable modem in office.


You would need a 4 - 8 port router... with a wire going to each Jack... and these would plug into the Router ports, The router plugs into the Modem. You have to put the Ethernet plugs on each end of the Cat5 cable. Then you setup your network. But if you have a wireless router you simply need each PC WiFi enabled, IE: A wireless card in each PC, that way you do NOT need Cat5. Then each PC, simply connects to the Router/Modem.

Mar 05, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I need to wire a network cable into a wall plate purchased at home depot. the plug is not rj45 but a block with 8 screws and different colored wires. the problem is the colors don't match cat5e wire.any...


I have tried this, and my suggestion is to go back and get the proper wall jack. How much are headaches worth to you? If they are worth more than the wall plate, just **** it up and get the correct one.

Jan 05, 2010 | Cat5e Computers & Internet

2 Answers

Wiring on a RCA RJ-45 wall jack


the RJ45 wallplate is not meant for ethernet. It's an 8P8C connector for a phone. Will it work as a network jack? Maybe. I wouldn't use it, but if you really want to try, wire it thusly:

1 Blue --- Orange/White
2 Orange --- Orange
3 Black --- Green/White
4 Red --- Blue
5 Green --- Blue/White
6 Yellow --- Green
7 Brown --- Brown/White
8 White --- Brown

I'd still recommend a CAT5 wallplate with a CAT5 jack.

Apr 11, 2009 | Computers & Internet

1 Answer

Dont know how to hook up cat5e cable to a leviton cat5e jack


Those two jacks are telephone jacks (RJ-11) not ethernet (RJ-45). The jack marked telephone is for a phone, and the jack with a rectangle symbol is for the telephone line into the wall.

You need to buy an ethernet PCI card - without one you can not use a cat5e line (which has an RJ45 connection).

Nov 22, 2008 | Leviton Computers & Internet

1 Answer

Phone to Cat5e cabling - How do I wire the wall plate


Wire your phone box using your Cat5 cable, use 4 wires instead of 8 wires of Cat5.

Nov 20, 2008 | Cat5e Unshielded Twisted-Pair Patch Cable...

5 Answers

Cat 5 wiring issue


I know this is an old thread, but for the sake of helping someone else in the future, I just got off the phone with the Phillips Help Desk and this is the way they told me to wire it up the RJ-11 & RJ-45 combo jack I bought (PH60037):
  • RJ-45
  • Jack colors - CAT 5e
  • Blue - white/orange
  • Orange - Orange
  • Black - white/green
  • Red - Blue
  • Green - white/blue
  • Yellow - Green
  • Brown - white/brown
  • White - brown


  • RJ-11
  • White - white/green
  • Black - white/orange
  • Red - blue
  • Green - blue/white
  • Yellow - orange
  • Blue - green
He said it was the standard configuration used by the phone companies for some time.
Phillips Help Desk # for phones/PCs (800-233-8412)
Hope that helps someone else down the road.

Thomas

Apr 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...