Question about Electric eZip Trailz 26 Women's Comfort Bicycle

2 Answers

I have a women's EZzip Trail just like the one in the picture. It worked great for the first two outings. We have been charging the battery. Yesterday when starting a ride all three lights turned on the indicator and the bike would violently **** forward a few inches and shut off. It would then repeat that every few seconds as long as the switch was on.

Posted by on

  • crappietim Sep 15, 2010

    I have a Ezip Trails bike by Currie. The bike is brand new has been riddent twice with no problems and has been fully charged 8 hrs each time. Yesterday when we turned the switch on the bike violently jumped forward all battery lights lit up and it shut down. It would continue to do this as long as the switch was on. Per Currie I checked the fuse and tried removing the brake inhibitor switch but this did not fix the problem. I have reviewed the troubleshooting guide and as this is my second bike from them I really don't want to return it.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

I already answered this question once. But it wants me to do it again. So if you get both of my answers then just disregard the other. It is the rehi-stat. The rehi-stat controls how much power you get to the motor. I know that you don't want to return the bike, but unless you know an electrician to repair(replace) the rehi-stat then you will have to return it. Sounds like they need to work on their quality control. Good Luck!

Posted on Sep 15, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 22,156 Answers

This is another catch 22 question as with these machines they can be tempremental with the electronic circuit board and as its a new machine then take it back to dealer as it must still be under warrenty

Posted on Sep 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The camera does not take pictures once I mount it outside


Is the battery charged, and the ISO rating and focus point correct?

Aug 26, 2017 | The Video Cameras

1 Answer

Where can I get a replacement battery for the trail tracker, emergency radio lantern, yellow?


Trail Tracker Sport Lantern/Weather Radio doesn't charge using the hand crank dynamo for my Power on Board Trail Tracker lantern/radio, You most likely need a new battery, you can purchase one from Black...

More information please open this link:-- Best Manuals

Jun 17, 2016 | Cars & Trucks

1 Answer

Why does my battery light come on in my '02 trail blazer


It's usually on if the alternator isn't charging. You'll have to connect a voltmeter to the battery terminals. If it reads 14 - 14.5 volts you'll have to look elsewhere. If it reads below 13 volts the charging system is not working. The alternator is quite often the problem.

Mar 02, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Moultrie D50 game trail camera won't take pictures in dark


Does the flash work? Could be flash circuit or day/night sensor.If you have another D40/D50 camera that flash works but has other problems,swap out the sensors.If not the sensor but the flash circuit then most likely one of the large charge capacitors which has to be soldered in.I use a digital multimeter with I/O capacitor test function..these caps should be about 250mfd.

Nov 21, 2011 | Moultrie MFHDGSD50 Game Spy Camera D50

1 Answer

I just bought a tasco trail camera. I set it up by the manual that came with it. It will take a couple of pictures and then it seems to shut off. If I take the batterys out and reinstall them it will work...


Hi.

Are the batteries fully charged? It is recommended that you fully charge the batteries first before you use the camera as the camera can literally eat batteries.

If you have fully charged the batteries and the camera still only allows you to take a few shots then I suggest that you take/send the camera back and have it replaced.




Regards.

Apr 28, 2011 | Cameras

1 Answer

My watch works with movement, and will work for a few seconds then stop, even thought I'm continously moving. Is it a shortage or something? I can shake the watch and it will work but only for a few...


I would take it to a watchmaker/jeweler to have them check the battery. Some watches have a battery bar that holds the battery in and it may have come loose. Or the battery is losing charge. It should not cost you anything to have them check the battery for you. Good luck

Jul 22, 2010 | Anne Klein AK Round Brown Crystals Watch...

1 Answer

Olympus sp565 shutter button is malfunctioning


I will second that. I can't seem to find a solution for the exact same problem. I tried to take a picture but does not respond, If I take the batteries out and put them back in as soon as I turn it on it takes a picture, then doesn't respond again. AHHHHHHH. Ive only had this camera for about 18 months and I'm so disappointed. I had a fujifilm 5600 Which I passed onto my sister we both have never had a problem, it's 5 years old now and still going strong, Now my camera is wiggin out and I need it to work ASAP CAN ANYONE HELP US

Jun 13, 2010 | Olympus SP-565 UZ Digital Camera

1 Answer

When i turn on my camera the red light won't stop blinking


change or charge your battery. The red light will blink to indicate the flash circuitry is charging.

Jan 08, 2010 | Bushnell Trail Sentry 11-9200 Digital...

2 Answers

When I connect my battery light dims on battery and speed control wont work Battery is fully charged.


The more you recharge a battery, the battery's lifespan is reduced. After a certain amount of charges, the battery will not be able to hold a charge for a long amount of time.

Note: Make sure it is a rechargeable battery

Dec 26, 2008 | Electric eZip Trailz 26 Women's Comfort...

Not finding what you are looking for?
Electric eZip Trailz 26 Women's  Comfort Bicycle Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Cycling Experts

Eric Hidle

Level 1 Expert

18 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Electric Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...