Question about Hobart D340-6007 Mixer

4 Answers

LEGACY 12 QUART AND 20 QUART COMPATIBILITY????? I had my attachments and bowl from my hl120 stolen or thrown out when we moved. What do I need to do to be able to purchase and use the 20 quart attachments and bowl. Both mixers look identical and sizes look the same when I search through Hobart parts.

Posted by on

  • 2 more comments 
  • breadbaking Sep 15, 2010

    Yes but look at the picture of a 20q legacy and a 12q legacy and you will see the same machine and the length of the bowl shorter on the 12q with lots of room under it. Can someone who has both mixers let me know if they interchange.
    Thanks

  • breadbaking Sep 15, 2010

    Looking to see if someone has put a legacy 20q bowl and attachment on a 12q legacy...???

  • breadbaking Sep 16, 2010

    They are the same size as i called hobart and the parts dep. confirmed it. They however did not know if they are interchangable!!

  • breadbaking Sep 16, 2010

    Anybody???

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The 12 and 20 are different animals and a12 will not accept 20 quart equipment. Older hobart 20 quarts (A-series) will take a 12 quart down size bowl and has special attachments but a 12 will not go up to a 20. If you have a 12 quart legacy you will have to use 12 quart attachments and bowl. I presume your hope ing for 20 quart stuff after seeing the costs. Be thankful you don't have a 10 quart. Makes no sense but the small machine attachments are outrageously priced. Just as an added note. Do not buy any 12 or 20 quart parts for,your legacy from an older A series model as they will not fit.

Posted on Feb 24, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

Do you in fact have the 20 quart bowl? I believe it may need new arm extensions, I will research this, but verify you do have the 20 quart bowl? If not, why not just buy a replacement 12 quart bowl that was identical to what you had before?

Thanks
Tim

Posted on Sep 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

I couldn't find anything on the net to indicate the 12 qt and 20 qt would be interchangeable. You best bet would be to contact the manufacturer through the information in your manual.
The units may look the same in the parts book, but they simply, because of volume, couldn't be the same size.
Good luck, perhaps Hobart has a solution.

Posted on Sep 15, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,

In picture it may look alike but actually the size varies.The length of 12 vs 20 bowl varies.it goes on increasing like 40 qt and 60 qt.The mouth of the 20qt will fit but the length will not get adjust.The bottom leg of the Mixer will be a problem.It cannot adjust to it.You cant change the leg alone.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the difference between a H800 and L800 mixer


I have used the H600. Nice piece of kitchen kit for hard use.

Model H600 is a heavy-duty 60-quart mixer which features a two-horsepower motor, a timer and a #12
Attachment Hub as standard equipment. With the use of bowl adapters and special agitators, 30- or 40-
quart bowls may be used on the H600.

Model L800 is a medium-duty 80-quart mixer designed primarily for use in general kitchen applications.
This mixer features a timer and #12 Attachment Hub as standard equipment and is powered by a
two-horsepower motor. With the use of bowl adapters and special agitators, 30-, 40- or 60- quart bowls
may be used on the L800.

A Bowl Guard is standard equipment on all H600 and L800 models.

A programmable timer controller is optional on H600 and L800 models.

These mixers can be ordered with a stainless steel finish.
A variety of attachments and accessories are available for all mixers. These are described in a separate Use and Applications Handbook, which is furnished with each mixer.

Here is your manual.

http://www.cvrsupply.com/manuals/hobart/Hobart_L800_Manual.pdf

http://www.cvrsupply.com/manuals/hobart/Hobart_L800_Manual.pdf

May 07, 2016 | Food Mixers

1 Answer

How do I change the gear oil in a food service mixer sp62


About 49 results (0.77 seconds) Search Results

    [PDF]Instruction Manual for Globe Mixers - Globe Equipment ...

    https://globeequipment.com/media/product.../Sp10_Owners_Manual.pdf
    Or call the Globe service department at 937-297-7247 and ask for contact .... Please remember that this manual or the warning labels do not replace the need to be alert, to properly train and .... gears or other parts and WILL void the warranty! 7. ... Lubricate the attachment shaft with a food quality grease or mineral oil. 4.

    SP62P 60 Quart Pizza Mixer - Globe

    www.globefoodequip.com/.../mixers/...mixers.../sp62p-60-quart-pizza-m...
    This mixer comes complete with an 60 quart stainless steel bowl, spiral dough hook and bowl ... High torque direct gear drive transmission; Oil bath transmission.

    Globe SP62P Gear Driven 60 qt. Commercial Planetary ...

    www.webstaurantstore.com > ... > Commercial Floor Mixers
    Commercial Planetary Floor Pizza Mixer - 3 HP. In stock ... What is White Glove service? ... Globe XXBOWL-62 60 Qt. Stainless Steel Mixing Bowl for SP62P Mixer.... Planetary grease fitting and gear oil meter. .... Globe SP62 and SP80PL MixerControls .... 2003-2016 WebstaurantStore Food Service Equipment and Supply .

Jan 30, 2016 | Globe Food Mixers

1 Answer

I own the 6 QT Stand mixer. Is there a Is there a 4 or 5 qt bowl that works with this mixer?


Kitchenaid does not make a 4 or 5 quart bowl that would fit your 6 quart mixer, but other 3rd party companies do!
You may be in luck.
I haven't seen this bowl in person, but it apparently will fit your 6qt mixer. Here is a link to a page selling the mentioned attachment. It comes in a set, with appropriate wire-whip attachments:

http://www.chefscatalog.com/product/25686-kitchenaid-3qt-stainless-bowl-and-whip-set.aspx

Jan 13, 2015 | KitchenAid Kitchen Aid KP26M1X 6 Quart...

1 Answer

Missing the bowl raising handle


Check your manual that came with it. There's usually a customer service number. Things like that usually must be ordered dirctly from the manufacturer.

Jan 01, 2013 | Uniworld Commercial Kitchen Mixer 20 Quart

3 Answers

Where can i buy a splash guard for hobart A200


There are two different splash guards fort he A200.
If you have a 12 quart bowl the splash guard is a part number 438078 and if you have the 20 quart bowl the part number is 438079.
Both parts are available from
http://storefront.whaleyfoodservice.com/.

Jun 21, 2012 | Hobart A200 Stand Mixer

1 Answer

I NEED TO BUY A HOOK


if you need a hook for a Hobart 12 qt mixer these folks have them
http://www.onesharpstore.com/catalog/item/2001400/5507215.htm
49.99

May 20, 2010 | Hobart HL120-1STD Mixer

1 Answer

The attachment jams


See pg. 12 of the owners manual for bowl height adjustment procedure:

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209707946.pdf

There is a screw in the base of the mixer which is turned
clockwise to raise the bowl
and counterclockwise to lower
the bowl.

Apr 05, 2010 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Beater rubbing bowl


Although I can't find your mixer by the model number you gave me, I assume that your mixer is the kind which the bowl moves up and down not the "tilt-head" style.

See pg. 12 of the owners manual for bowl height adjustment procedure:

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209707946.pdf

There is a screw in the base of the mixer which is turned
clockwise to raise the bowl
and counterclockwise to lower
the bowl.

Apr 04, 2010 | KitchenAid K5SS Heavy Duty Commercial...

1 Answer

How can i tell the which size my mixer is?


A 200 means 20 quart. I assume you have no bowl or else you can just measure the volume of the bowl.

Nov 29, 2009 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart D340-6007 Mixer Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1773 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Lawrence Oravetz

Level 3 Expert

9324 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...