Question about Targus PAKP003U Keyboard

5 Answers

MICROSOFT WIRELESS MOUSE FOR LAPTOP DOESN'T WORK

I'VE CHANGED THE BATTERY, PLUGGED IN THE WIRELESS CONNECTOR, BUT MOUSE WON'T WORK. WHAT DO I DO

Posted by on

  • Anonymous Nov 10, 2008

    I tried clicking connect on the usb thing but it still didn't work.

  • Anonymous Mar 07, 2009

    i connected mouse to laptop but when i try to use tHe mouse it dosent move

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There's also a connect button on the USB connector. Plug the connector in and press the connect button underneath until the light flashes. Release the button and click the connect button on the mouse until the USB light is steady.

Posted on Dec 22, 2009

  • Brodie Sherman Aug 22, 2013

    I don't have a connect button on mine i have a microsoft explorer touch and when i plug it in it says that the USB has malfunctioned

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

You probably have to "connect" the mouse to the wireless connector.

Usually under there is a "Connet" button on the button side of the mouse. Press and hold this button for three seconds.
This should sync the mouse with the wireless connector.

Posted on May 16, 2008

  • washaboo Oct 15, 2010

    hooray! thanks so much!

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Solution #3 was it for me. I can't believe they put those tiny little connect buttons on that usb stick and the mouse both. I did it and its working great! thanks so much!!

Posted on May 29, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There might be a other problem to mine does not work so i took apart the usb reciver and found that a wite wire had been broen becouse the reciver moves up ad down so much it broke the wire

Posted on Aug 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with the same mouse when i pres the connect while the stick is inside it blinks and the pointer moves but not so good, when the blinking stops and its green the pointer doesnt move again... !!

Posted on Aug 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a uniden wireless mouse and it won't


here ur pc is recognizing ur external hardware that is mouse but cursor is not moving this indicates that bluetooth connection is good and problem comes with the mouse. i advise to meet a good technician and there is nothing to do with it further.

Jun 28, 2013 | Computers & Internet

1 Answer

Mouse problem


Update and install the newest hardware drivers from the Microsoft site. This should correct your problem. Yes, I know it will work Plug & Play, it just doesn't work properly. The other issue is batteries... use the most expensive batteries you can afford and never rechargeables as the voltage is less 1.25 V vs. 1.5 V.

Aug 27, 2012 | Microsoft Wireless Notebook Presenter...

1 Answer

Logitech wireless laser mouse not working my computer


If your computer has Windows XP or later your computer should automatically install generic drivers for it so that it works. So if that's the case and it still doesn't work then try changing the battery in the mouse, or plug the wireless adapter for the mouse in a different USB port.

Jun 25, 2012 | Acer Computers & Internet

1 Answer

Microsoft wireless mouse model 1007 , will not work


  • Put in the batteries Find the battery covers and slides it off. Insert the appropriate batteries. The wireless receiver that plugs into the computer runs off the computer's power and needs no batteries.
  • Plug in the receiver to the computer. Usually the receiver will plug into the USB port, but some plug into the mouse port. If all of your USB ports are filled, see if the mouse came with a USB adapter. The adapter fits into the mouse port. Be careful not to accidentally force the mouse adapter into the keyboard port.
  • Connect the mouse once you have it plugged in. The receiver should have a visible button that is easily push able by the average human finger. The mouse will usually have a very small hole with a button inside it that can only be pushed by something like a pencil or paper clip. Push both buttons at the same time with the receiver and the mouse relatively close to each other for about 5 seconds or more.
  • Position the receiver in a place that isn't far away from the mouse. Depending on where you are, you can place it on the monitor, on the tower, on the back of your laptop (if you are installing the mouse to your laptop) or on the desk. The furthest a wireless mouse can get away from the receiver without working very well is about 9 feet (2.7 meters), so keep that in mind.
  • Test your new mouse.

If you plugged into the mouse port, restart your computer manually.

If you plugged it into the USB port you may begin using it.

When the cursor moves when you move the mouse, you have connected the mouse properly. If the cursor doesn't move, try repositioning the receiver. If it still doesn't work, you may need to restart your computer (if you haven

May 16, 2011 | Microsoft Wireless IntelliMouse Explorer

1 Answer

I have a microsoft wireless mobile mouse 3000. I


try to look at if you plugged it properly. or bring it where you bought it and ask your question to them

Dec 20, 2009 | Microsoft Wireless Mobile Mouse 3000

4 Answers

My mouse was just working and all of a sudden it stopped, I changed the batteries, reset the small button on the bottom and also pushed the button on the plug in portion. Help Allen


I have a miscrosoft wireless laser mouse 6000, and it also stopped working on my laptop. I changed the battery, still not working. I tested the battery in another device, and it was good. I moved the mouse to another computer, and it did not work. The light on the usb connector was lit. [No changes at all to my laptop.]. It seemed like there was no power to the mouse, and I looked at the contacts inside the mouse. The contact just inside the battery opening appeared to be bent down away from the contact on the battery tray. So, I pulled it up a little so it would connect when the battery drawer closed, and (after tweaking it a couple of times), it finally worked!

Dec 08, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

2 Answers

Microsoft wireless notebook laser mouse 6000 not working


I have a miscrosoft wireless laser mouse 6000, and it also stopped working on my laptop. I changed the battery, still no workie. I tested the battery in another device, and it was good. I moved the mouse to another computer, and it did not work. The light on the usb connector was lit. [No changes at all to my laptop.]. It seemed like there was no power to the mouse, and I looked at the contacts inside the mouse. The contact just inside the mouse's opening for the battery appeared to be bent down (away from the contact on the battery tray). So, I pulled it up a little so it would connect when the battery drawer closed, and (after tweaking it a couple of times), it finally worked!

Jun 26, 2009 | Microsoft Wireless Laser Mouse 6000 v2.0

2 Answers

Wireless mouse


Dear friend,
I think that you are right, please check the manufacturing date of the mouse if one year has been passed that means it is ture.please also try to check your mouse after changing all the batteries of your wireless mouse.
thanks.

Jul 30, 2008 | Microsoft Wireless Optical Mouse

9 Answers

MS wireless notebook mouse 3000 not working?


A friend of mine brought me this problem with exactly the same problem. here is what I found. The small notch in usb device socket under the mouse was malfunctioning. If you press this notch you will find the mouse red light blink. If you further try pressing this notch at some point the mouse red light comes on constantly. Thats it, hold it there and try to connect first by pressing the usb device connect switch and then the mouse connect switch. The moment the connection is made the usb device stops blinking and the red light on the mouse starts blinking. Wow, it works now. Some one might just open the mouse and fix this microswtich for a permanent solution.

Jul 08, 2008 | Microsoft Wireless Notebook Optical Mouse...

Not finding what you are looking for?
Targus PAKP003U Keyboard Logo

12,465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Targus Computers & Internet Experts

steve morris
steve morris

Level 3 Expert

1675 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Are you a Targus Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...