Question about Microwave Ovens

2 Answers

I need another wb21x180 hot wire relay. New or used. Otherwise, my lower owen works perfectly. Can you locate one of these parts or do you have one to sell yourself? Thank you

Posted by on

  • 1 more comment 
  • pampelw Sep 15, 2010

    The solution just offerred is idiotic. I already did it weeks ago. I know the part is no longer made. I need the names of parts places in the US that have a huge inventory of very old parts. Already have searched internet for this part - no luck. So far, very unhappy with your assistance.

  • pampelw Sep 15, 2010

    I just contacted Davesrepair. No luck. Any other people to contact for wb21x180. Thank you.

  • pampelw Sep 15, 2010

    My double oven is a GE and model no. is jk290ribc.


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

Here is the link

It's almost out of stock so better hurry to order it now.

Please rate this solution or post back if its not the one you want and specify the brand and model of your oven.
Thank you for using Fixya.

Posted on Sep 15, 2010

  • Danilo Baraquiel
    Danilo Baraquiel Sep 15, 2010

    TEMPE - 480-755-0005
    PEORIA - 623-972-5022
    NORTH PHOENIX - 602-863-3476
    MESA - 480-827-0161
    SCOTTSDALE - 480-970-1010
    SOUTH TUCSON - 520-624-2102
    EAST TUCSON - 520-751-8800
    WEST TUCSON - 520-293-8888
    LAS VEGAS - 702-382-6532
    RENO - 775-348-9090
    SALT LAKE CITY - 801-975-1333
    SAN ANTONIO - 210-223-2675 or 210-525-0636

    That's all information I can give.. Good luck


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! This part is no longer available online. Try the electronic parts surplus store near your area, they may have kept one. Hopefully you find one. Have a nice day and thank you for using Fixya!

Posted on Sep 15, 2010

  • dj_relly999
    dj_relly999 Sep 15, 2010

    Hi! I provided a link where you can inquire a relay for your unit. Im sorry if I didn't satisfy you on my first solution but I'll do my best to give you what you need. Hope this helps. Please click here


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tappan microwave vent motor and cooktop lights not working

see this test . God bless youThis microwave oven repair is only for over the range(OTR) models. First, with microwave still installed, gain access to the control board and check for voltage from the fan relay. If you are not getting voltage from the fan relay on the control board, and your display says fan is on, then you need a new control board.
Again, this microwave oven repair is for OTR models. If you know your light bulbs are good and your display is telling you that they should be on, check the light relay on your control board. If no voltage is found at that relay, then replace the control board. Otherwise your problem is in the light socket, wiring, or wire connectors. You can get to all of that by unscrewing 6-8 screws under the unit and taking the bottom panel off.If voltage is present and the wiring that you can see looks good, then you will have to take the unit down and test for voltage at the fan itself. If the voltage is present there, then test the motor itself and/or start capacitor for the motor. The fan motor assembly will slide out of the top of the unit after you take it down and unscrew 2 screws. Below, in the list of component testing, you will see how to test the motor and start capacitor. get the part from

Apr 04, 2013 | Tappan Microwave Ovens

1 Answer

KitchenAid Microwave KHHC2090

Remove the relay case and gently file the points until clean with a miniture file set from Radio Shack, and spray the points with electronic cleaning spray also available from the same location, try this if new relay won't work.

Aug 01, 2012 | KitchenAid Architect Series II KHHC2090S...

4 Answers

I have a 6 year old side-by-side Frigidaire refrigerator (FRS3R4E). It has the click-buzz-click syndrome as below: I replaced relay...

The sound you describe is probably the relay trying to start the compressor and the overload clicking on and off when the compressor does not start. Turn the control for the refrigerator off for about 1 hour and turn it back on. If the compressor starts the relay and overload should be replaced, the compressor is probably good. There is a new product that eliminates all three components.
ERP-410 PowerStart

PowerStart (Relay, Capacitor and Overload) This 3-in-1 Combination relay, capacitor, and overload stock# ERP410 comes totally pre-wired and includes wire nuts to fit just about any application that requires 120V current AND the compressor is between 1/4 through 1/3 HP. This will replace all 3 electrical components on all capillary refrigeration systems; commercial, domestic, and in freezer systems.
Here is a link to the part

Jul 22, 2011 | Microwave Ovens

1 Answer

Sharp R21LTF not heating at all what should i look for

place a cup of water inside
program the owen for 1 min
remove the cup when done
check temp.
if hot, it works
if not, repair appliance

Mar 02, 2011 | Sharp R21LTF 1000 Watts Microwave Oven

1 Answer

My ge spacemaker over the counter xl 1800 MW owen just buzzes when u put the fan, on or try to use the owen, the owen , doesnot work, the fan will buzz but will work, the owen buzzes and does not work?

I would bet your oven's model number is a JVM185#xx### or JVM186#xx###.

We see (and repair) this a lot. The problem is a failed capacitor on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 17, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Spontaneous fan on/off

Q - The fan in my microwave oven is not running will this hurt my microwave?
A - YES, the fan cools the magnetron and electronics, take the microwave in for service, most fans are not too expensive to replace.
Many thing can do this but, common things are....loose high voltage wire.....poor solder joint on board.....magnetron.....power relay.....

Dec 11, 2008 | KitchenAid Microwave Ovens

1 Answer

I have a Panasonic NN-E273S microwave, it appears to work correctly but there is no heat, please help

If it is running, including plate rotating, and there is no heat, then you need to replace a part called magnetron.

The magnetron is located behind a protective plate on the internal side of the owen.

Here you see a general diagram, and you can also buy the part. Browse with the mouse on top of the picture to see the magnetron.

Here you can also get parts and diagrams.

If you want to call atechnician you can use the number listed on the owner manual.

Oct 11, 2008 | Panasonic Microwave Ovens

2 Answers

My ge microwave after running for about 3 to 4 minute it shuts down and will not start up again for 30 minutes model # TH903659B JVM 1650 JVM 1651 what is the problem thanks

If the fan comes on when you put the unit into a cook cycle and all sounds normal otherwise, you most likely have a bad magnetron tube. (Google "GE magnetron failure" and watch how many complaints and articles pop up). The tube overheats and trips the thermal relay causing the unit to shut off until it cools back down and comes on.
Very, very common problem on these models although GE will not admit it.

Jul 11, 2008 | GE Microwave Ovens

1 Answer

F82 code

If it's a Panasonic commercial model (NE1757,NE2157), check the two fuses first. If one is blown, first take a look at the upper door switch to be sure it's activating. If that and the bracket look ok, you most likely have one of the following parts that need to be replaced...
Fan motor, HV Transformer, or Magnetron tube (or a combination of). Also look at the two white wires going to the middle relay on the lower relay board. If they're burned, you'll need this board and possibly one of the above parts as well.

Jun 30, 2008 | Panasonic Microwave Ovens

1 Answer

Panasonic NN- S760BA heating problems

Chances are it has a bad magnetron. If you decide to have it serviced, I would definitely recommend that you contact a servicer who is authorized by Panasonic. You can find them here: Good luck.

Feb 20, 2007 | Panasonic NN-S762 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers


Level 2 Expert

225 Answers


Level 3 Expert

75822 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides