I need an updated softwear for Citizen Hyper AQUALAND Dive computer Where can I find one?

Citizen Men BJ2004 08E Eco Drive Aqualand Two Tone Black Rubber Strap Dive... Visit this site to get more details.
https://electronicshelponline.blogspot.com/

This is a factory job best outcome for price and outcome. Hope this helps gabe

My Cyber was working fine and reporting a full charge, but when diving, it would stop working and go into safe mode. I sent it in to Citizen and they replaced the cell, now all is good again.

click on the link beloe to download the manual
http://www.citizenwatches.com.au/instruction-manuals

What do you mean by adjust it. Do you mean to set the time or are you trying to do something else?

Try hitting the backlit button. If your computer resets or dies, you have a battery issue.

It turns to "chek" if the moisture sensor that triggers dive mode when you go in the water is exposed to water and you don't dive for more than an hour. The sensor is very easily triggered by sweat, so all you got to do is wipe the sensor between the crown and the upper right button with dry cloth and "chek" will go away.

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical
support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on
"get setting instructions"


or

Go to "citizen.com" and click on "watch finder".

Put your watch model into the search box on the left and click on
"search".
Click on the watch to view details.
On the right is a small menu, click on "get technical info"

On the right you you will see a list of instructions you can download

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on "get setting instructions"