Question about Canon Office Equipment & Supplies

1 Answer

HAVE CANON F60 MULTI PASS. ERRPR IS WASTE INK NEAR FULL SEND BACK TO CANON WHY CAN'T I REPAIR IT MYSELF

Posted by on

  • louis_ciavar Sep 15, 2010

    SORRY NEITHER OF YOUR SOLUTIONS WORKED HAVE ANY OTHER'S????

  • louis_ciavar Sep 15, 2010

    SORRY TIM THANKS FOR YOUR HELP I SPOKE TO CANON YESTERDAY THEY ALSO SAID TURN UNIT OFF UNPLUG AND LEAVE OFF A FEW SECONDS THAT SHOULD RESET UNIT FOR LITTLE WILD LONGER THAT DID'T WORK EITHER IT'S ONLY A SPARE SO I CAN'T BREAK WHAT IS ALREADY BROKEN THINK I'LL TRY MYSELF THANKS AGAIN IF I FIND ANYTHING I'LL LET YOU KNOW

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

It is not recommend you try to fix it yourself, you can try to manually reset the error code, but if the waste ink is really nearly full and you reset it, it could damage the printer pretty severely. Here are manual reset instructions for a similar model printer, it should work on the F60 if the buttons are the same:

1) Enter Service mode by pressing: menu-copy-#
2) select: Test Mode
3) select [8] printer test in test mode
4) select 3 [eeprom clear]
5) select 0 [ink count]
6) press the [stop/reset] key (returning to the state of 3), and press the [on/off] key


If that doesn't work try this one:

1) Enter service mode by pressing MENU,COPY,SCAN,COPY,COPY
2) Select TEST MODE
3) Select (8) PRINTER TEST in TEST MODE
4) Select 3 (EEPROM CLEAR)
5) Select 0 (INK COUNT)
6) Press the SET key
7) Press the (Stop/Reset) key, returns to the state of 3, then press the ON/OFF key

Posted on Sep 15, 2010

  • 1 more comment 
  • Tim Grayson
    Tim Grayson Sep 15, 2010

    Hmm, no, those are the only known ways to reset Canon messages like that. And those aren't even supposed to be known by us, only by Canon themselves...

    I think you are going to need to send this printer to canon unfortunately, or find someone locally that is authorized to service them.

    SO sorry :( If you need Canon's contact information:

    800-828-4040 You should be able to hit # right at the recording and wait for a live person

    Thanks
    Tim

  • Tim Grayson
    Tim Grayson Sep 15, 2010

    No problem, let me know what you find!
    Thanks
    Tim

  • Tim Grayson
    Tim Grayson Oct 11, 2010

    Please if possible come back to the question here and rate it 4 thumbs. It looks like the answer helped you, but for some reason it doesn't rate it 4 thumbs unless you come back a second time and specify 4 out of 4 thumbs. I hope you will do this for me. Thanks Tim

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Waste ink near full - how do I empty it?


Hi

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 23, 2010 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Waste ink nearly full LCD ERRoR on Cannon multipass F60 printer


HiHello try ths

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Oct 17, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Stopped printing after 'waste ink full message' how to I fix it.


Inkjet printers have a fibrous pad inside them that collects the waste ink from cleaning the print head. Over time, this pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error.

Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you. Once they are replaced, it'll be functional again.

May 20, 2009 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Waste ink cartridge full


Maybe it waste ink

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 27, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon MultiPass F60 "Waste ink near full"


Okay, follow these steps below to reset this message:

1) Enter SERVICE MODE. By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Then call Canon 1-800-828-4040

Just inform them that you have already reset the counter so the error is gone, but you needed to know if there is a part that needs cleaned or replaced to prevent further problems.

Jan 19, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon Multi pass F60 (waste tank near full)


Power off and on at button. If message continues it needs service.

Sep 19, 2008 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon F60 waste ink near full message


Hi. I actually had to reset the waste ink volume counter on my F60 and found a solution posted by NerdRUs that helped me. So I copied and pasted it below:

Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Apr 22, 2008 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Troubleshooting


Hi

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 08, 2008 | Canon MultiPASS F60 All-In-One InkJet...

2 Answers

WASTE INK NEAR FULL


I have the same problem and my power will not turn on if the resume button is depressed. Is there a way to fix the waste ink problem?

Feb 06, 2008 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon f60 print check


i cannot print alarm light is on window reads "waste ink near full"

Mar 04, 2007 | Canon MultiPASS F60 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1923 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...