Question about Car Equalizers & Crossovers

1 Answer

Hello i read about your kenwood aux problem and was wondering if you found out how to get to the aux setting? i read through the manual and couldnt find how to, would be very grateful if you explained to me! thanyou

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

First of all you must understand that all the generic driven components are I.C based.Hence any short circiut coming from the out-puts can lead to the ic failure.Always you should match the red white etc to the corresponding amp equipment.

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood car stereo manual


Crutchfield has the manual on the product page in the Details tab: http://www.crutchfield.com/S-bfT7rFz0tNa/p_113DDX790/Kenwood-Excelon-DDX790.html . Scroll down to the What's in the box section on the right. The direct link to the manual is http://a248.e.akamai.net/pix.crutchfield.com/Manuals/113/113DDX370.PDF .

If you mean the Sirius XM Radio ID to associate the receiver with the Sirius Connect Vehicle Tuner, when in the Sirius XM mode, tune the unit to Channel 0 .

I hope this helps.

Cindy Wells

Aug 29, 2014 | Kenwood DDX790 In-Dash 6.95" LCD...

1 Answer

DPX300U Kenwood - about every 2-3 weeks the deck wont come on when I start the vehicle. Pull the fuse and reinsert and it comes on. Last time it happened I pressed the reset on the deck and it turned on...


I am having the same issue. I keep having to pull my fuse every few days to get my dpx300u to work again. I'm thinking of just hooking up a switch to the fuse input just to have a power reset button on the thing, because i'm getting sick of having to to tear apart my center console every time this happens.

Oct 24, 2013 | Kenwood DPX300U 2DIN USB/CD Receiver with...

1 Answer

I need a wiring diagram for my kenwood KGC-4041 equilizer .I want to connect it to my KDC-MP242 CD player. Is that possible?


Most of the time you plug your RCA wires which are red and a white solid colors only, into the equilizer. Plug in every thing that you want to equalize many which speakers do you want to sound better. also check kenwood usa .com look for support your model # and downloads manuals. It's Free. Hope this Helps.

May 06, 2010 | Car Equalizers & Crossovers

1 Answer

I understand the diagram with the +12v and the gnd wires, but does the third wire only work with other Kenwood products? It appears to be a "sense" wire or similar that feels the presence of a powered-up...


Hello davec99,

The third wire is commonly called a "remote" wire and is used to turn on other devices, such as an amp, connected to the audio system. When the equalizer is off, there's no signal on the wire. When the equalizer is on, a low current 12V signal is on the wire, signalling the remote device to turn-on.

Hope this helps.

Jun 12, 2009 | Kenwood KGC-4042A 5-Band Car Equalizer

1 Answer

What to set the low pass frequency switchon the top of unit


to what you have explain your set is connected wrong find a qualified installer

Apr 02, 2009 | Clarion EQS560 5-Band Car Equalizer

3 Answers

In car graphic equalizer installation


035132ed-916f-4d02-8e5e-9fa428212a36.jpgPyramid stereo graphic equalizer model 9700g - Page 6

Mar 23, 2009 | Pyramid 801 10-Band Car Equalizer

1 Answer

Best settings on a 9 band eq for rock and r&b


Provided the rest of your system is all tuned an in proper shape, and up for the wattts, the best sound to set, starting with the low end...start with is a slightly elevated above zero (about 1/4 up from zero) then slowly gradually slope it down to 1/4 below zero in middle and then back up to 1/4 above at the high end.

The result is a gently curved V type shape.

Now, knock down the highest 2 or 3 freq bands a few clicks till they are just above zero. (1/8).

This is the curve you would shoot for with a real-time analyzer for SQ, punch and clarity.



Feb 11, 2009 | Kenwood KGC-6042A 9-Band Car Equalizer

2 Answers

Cannot Find Aux On Kenwood KDC W3037A


You have to ENABLE to AUX source thru the settings menu.

Users manual is HERE.




Best of Luck.

Please RATE my solution BELOW.

Nov 22, 2007 | Car Equalizers & Crossovers

Not finding what you are looking for?
Car Equalizers & Crossovers Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Equalizers & Crossovers Experts

auxpower

Level 1 Expert

18 Answers

Chen Dorot
Chen Dorot

Level 2 Expert

132 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Equalizer and Crossover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...