Question about Panasonic KV-S1025C

2 Answers

KV-S1025C i have a message to say clearn rollers and then clear down the counters in the user facility. I can not find the user facillity to do this. I have looked under all programs and it does not list panasonic scanner at all???

Posted by on

  • 2 more comments 
  • Anonymous Aug 01, 2008

    i am having the same problem

  • Anonymous Oct 24, 2008

    cleaned rollers. Now looking for magic button to clear page nos.

    What is the "driver"? on the machine? or software?

  • Anonymous Oct 24, 2008

    button to clear page nos from memory.

  • sittingbourn Nov 27, 2008

    I have same problem but still no answers looked everywhere I can think of

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

If you still have the CD that came with your scanner, put it in and you should be able to install the Panasonic Scanner User Utility. The utility has the buttons to allow you to clear the counter(s). If you no longer have the CD, then this link may help: http://panasonic.co.jp/pcc/products/en/scanner/downl_e.htm#USERUTY

Posted on Dec 02, 2008

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Look in the driver

Posted on May 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently had windows seven installed after a burn out on old hard drive not compatible with my scanner kv-s1025c any help please


Hello, basically, that's the curse of Windows 7. Unless the manufacturer of the peripherals is prepared to support the older stuff by writing new drivers for it, (and, of course, he won't make any money from that!) there's nothing we can do except shell out for new stuff that IS supported under W7. Personally, I'm sticking to XP Pro, as it's never let me down and there's bags of life in it yet. Regards, nicam49

Sep 06, 2011 | Panasonic KV-S1025C

1 Answer

I'm getting an "F62-52000000" error


F62 error is a problem with the lamp gain on the rear page camera .
Usually removing the camera & cleaning the optics will sort it out .
The scanner will need a good service & shading adjustment as well .
Only attempt this work if you are familiar with CCD Devices & care, as damage through mistakes can be very expensive .

AP Support Solutions

Aug 05, 2011 | Panasonic KV-S1025C

1 Answer

Just switched to Win 7 64 bit, can't seam to find proper driver download to my KV S1025C


As you can see at this official link the driver provided here is Windows 7 compatible. In case you have a proble take a look at this "how to" link.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Aug 04, 2011 | Panasonic KV-S1025C

1 Answer

I dont have a problem I just need to know what product I need to clean the rubber rollers on a weekly basis


Using liquids & chemicalsmay damage the rubber rollers or harden them. It is not at all necessary to clean the rollers on weekly basis. Instead you may clean them once a month with a soft, lint free cloth damped in luke warm water to remove any dust. Rubbing the rollers excessively may damage the rollers.
Also, keep the printer in a clean dust free environment and keep the printer covered if not in use for a long period of time.

Hope it helps! Good Luck!
CreativeTECH

Mar 30, 2011 | Panasonic KV-S1025C

1 Answer

How do you reset the counter on a Panasonic KV-S1025C. I have cleaned all of the wheels but can not find how to reset the counter. Many Thanks. Mike.


Click on the Scanner user Utility at the bottom of the pc task bar it is a yellow box it has a button inside to clear the counter

Dec 10, 2009 | Panasonic KV-S1025C

2 Answers

How do you clear the counter button on a panasonic KV-S1025C


Yes, you start at your start menu, then all programs, then panasonic, then scanner tool, then user utility.

Aug 14, 2009 | Panasonic KV-S1025C

1 Answer

Error Message: Rollers dirty; Clean rollers; Push 'Reset Counter'


There's a user utility that installs with the driver & other software. The counters for cleaning & replacement are in that.

Apr 09, 2009 | Panasonic KV-S2046C Pass-Through Scanner

Not finding what you are looking for?
Panasonic KV-S1025C Logo

1,885 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6117 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...