Question about Sharp XE-A404 PC Desktop

1 Answer

The mode switch stays on X1/Z1, no matter how the mode key turns. We can not get REG anymore or void or PGM. We still can turn it off.

Posted by on

  • stong99 Sep 15, 2010

    The register is plug in all the time. I have this register for a year, it is always plug in. Do I need a new battery or just buy a new one.

  • stong99 Sep 16, 2010

    Thank you for your general information, but can I replace the mode switch myself? Where can I buy a replacement switch? I just want to repair it myself and use it as a backup unit.Please just give me some detail of replacing the mode switch. What I need to do it right.

    Thanks.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 600 Answers

The units built in protection circuit might be faulty or needs resetting, this unit is operated by a rechargeable battery, try charging the batteries, you can do that by switching the mode switch to any position other than OFF, then plug in to ac outlet, charging the batteries may take up few hours up to two days, depending on batteries and their charge level,
for more info, try reading through here, http://www.cashregisterhelp.com/files/cas_man_XEA404.pdf

Posted on Sep 15, 2010

  • manuel oliva
    manuel oliva Sep 15, 2010

    It would be upon your decision,


    firstly replacing the battery would always be cheaper, but having it replaced would also mean you would be needing services from a tech. second thing for that is, the longevity that replacement or repair would be, on how long that would hold up.


    next thing to consider is the switch, could be also be defective to some state, the factors I stated in battery replacement would also imply.


    also, having or looking for replacement parts would be depending on your location, meaning availablity.


    but there is always an option to ask the store or dealer from where you bought the unit for repairs,


    Last is, as you said replacing the unit itself. Buying a new one would be good, but still repair would be cheaper,but then again, there are many factors to consider.


    so the decision would be yours,consider all the factors I gave your versus financial aspects.


    Thank you for using Fixya.com

  • manuel oliva
    manuel oliva Sep 16, 2010

    For parts, I have tried looking around since yesterday, for i thought you would ask, but unfortunately I did not find any, I guess the option for parts would be from electronics surplus in your area or the supplier or store from where you have bought the unit.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error mode x1


Press subtotal to exit whtever you were doing and then turn your key to Reg and operate

May 22, 2014 | Casio TE-2400 Cash Register

1 Answer

My samsung er 290 wont stop printing till roll


system option 21.Key on pgm press 21-RA-1-PO-CASH. Turn you key to reg and press PO. Good luck

Jan 28, 2014 | Sam4s Samsung Er-290 Cash Register

2 Answers

PP_0.00 is on the display screen The till stays on and inactive no matter where the key is


This sounds like a Royal. That's my best guess since you haven't told me what you have. PP means there is a printer problem. Look for a paper jam or any other reason why the printer motor can't turn.
---------------------------------------------------------------------------
If anyone needs Royal cash register manuals, try here: http://the-checkout-tech.com/manuals/cashregisters/royal1.php

Jul 20, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio tk-6000 error 26


switch off the register and do the following;
1. Turn the mode switch to PGM
2. Press and hold RECEIPT FEED
3. Power on and release the RECEIPT FEED key
4. 'FFFFFF.. ' will appear on the display if not, repeat 3 above.
5. Press SUBTOTAL key and wait for 5 seconds, the display will show 0.00
6. Turn the mode key to REG and you are done.

Sep 30, 2009 | Casio TK 6000L Cash Register

1 Answer

Sharp ER-A330 cash register. Have to enter Cashier # every sale.


You might need a special key to program this change, but try this:
  1. Turn the key to PGM
  2. Enter 9910 . @/FOR CA/AT
If you don't get an error, you're done. Turn back to REG sign on one more time, and try two or more sales in a row.

If you get an error, this kind of programming is disabled in PGM mode. you may have to take it to a Sharp dealer who has a Service key. Your MA (Manager) key can get you to any position marked on the Mode Switch, but the SRV key goes to two more unmarked positions beyond PGM. If you have that key or find a dealer who has, turn it one notch past PGM (to 7 o'clock position).
Enter 910 . @/FOR CA/AT
[Yes, it's a different number than in PGM mode.]

If you ever want to make cashier entry compulsory again, do the same thing, except enter 100 just before touching the CA/AT button.

The reason Sharp doesn't pass SRV keys with its registers is that you can totally mess up your register if you make mistakes with this key. Don't experiment with it, or your only hope may be to wipe all machine memory to get it working again.

Sep 29, 2009 | Monroe 2020Plus Calculator

2 Answers

Hello, I have a sharp xe-a404 I need to know how to do daily reading to bring all totals back to zero so I can start new day. Thank You!!!


turn the key to X1-Z1 enter the decimal and press cash. however this will not reset the Grand Totals unless its been set in the service mode.

Sep 10, 2009 | Sharp XE-A404 PC Desktop

1 Answer

Sharp xe-a41s cash register mode switch stuck


Sounds like you have the wrong key. Look at the letters on the key tab. OP stands for OPerator; it can only move from Off to Reg. MA stands for MAnager; it can move to all the marked positions. Some models also have an SM (Sub-Manager) key that moves from PGM1 to X1/Z1.

Mar 08, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

My Sharp Cash Register (ER-A410) won't turn on in manager mode


Hi.
It is usually caused by a faulty or dirty mode switch. The first thing to try is squirting a bit of electrical lube down the key hole (WD40 or similar works fine), then turn the key back and forth a few times. Otherwise, the contacts inside the switch may have failed. I have also had a loose connector on the main board cause this in another model, so you could try pushing the connectors inside and make sure they are tight.

Hope this helps. You can set the void button to work in REG mode if you don't want to get the MGR mode fixed. Just let me know and I can look up the codes for you. You should be able to refund items as well (unless this has been set work in MGR mode also).

Mark

Dec 11, 2008 | Casio Parts Cash Register PC Desktop

1 Answer

Casio tk 7000


Hi. It sounds like the guest check memory is full due to too many items in the tables. This is usually caused by people opening tables, filling them up and never finishing the table. The easiest way to overcome this is to reset all tables. Note: This will clear any current sales you have in tables, but should fix the error.
Turn key to X1/Z1 25 CASH CASH If it gives an error, then try 25 CASH 1 CASH It should print an open check/table report and show you which tables were taking up the memory. It will clear the sales out of those tables. Now turn back to REG mode and try it.
Mark

Nov 09, 2008 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Sharp XE-A404 PC Desktop Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Retail Supplies Experts

k24674

Level 3 Expert

7993 Answers

kakima

Level 3 Expert

102366 Answers

Electroboy
Electroboy

Level 3 Expert

1646 Answers

Are you a Sharp Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...