Question about Desa International Blower Glow Warm Wall Heater

1 Answer

Auto blower fan keeps running.even after burnner shuts off.you have to unplug it.after a few min. it makes a click noise. replug back in and its off.

Confort glow model-LCB20NT / HDB20NT SER# ZW070A35A

Posted by on

  • Kevin Tully May 11, 2010

    have you ever replaced the relay for the fan yet?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 188 Answers

There is not replacement parts that you can get for the blower. You will need to replace the blower. Here is a link to the owner's manual... http://12.153.20.74/manuals/124002-01C.PDF. You should be able to get the blower for your your unit online at www.masterparts.net. I hope this helps.

Posted on Apr 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New to wood furnace. Does the blower kick on automatically


Not sure what brand or model you have, but usually the fan wont come on until it heats up enough to close the fan switch which powers the blower

Jan 11, 2017 | Heating & Cooling

1 Answer

I have a Rheem Classic Super Quiet 80 gas furnace (for heat). The fan stops when the "heat" turns on.


Any time I ever had trouble,first thing to suspect is the thermostat.
They lose contact sometimes and sometimes you tap the face and they work til next glitch.
If the thermostat has some years on it,go ahead and replace it.
Can't you just leave the heat and fan in auto? That would be best,I think. don-ohio

Jan 10, 2017 | Heating & Cooling

1 Answer

I HAVE A BAND NEW KFA80DGD MODEL. I USED DEISEL, IT LIGHTS AND FAN BLOWS BUT AFTER A FEW MINUTES THE FLAME GOES OUT AND IT SHUTS OFF. THE INDICATOR LIGHT BLINKS...


there are two different viscosity rates and two different calorific values here
if it worked well on kerosene keep it on that
if you want to use diesel then have a technician come and set it up for diesel

Jan 04, 2017 | Heating & Cooling

1 Answer

How to bypass the relay on a Reddy M100D


Best change the switch ,than bypass it .

Jan 03, 2017 | Reddy Heating & Cooling

1 Answer

Electric Furnace stopped running


You have one of two problems. Either the capacitor for the motor has failed or the motor has failed. I would turn off the power to the unit and see if you can locate the capacitor and remove it. An ac supply or electrical supply house can match up the capacitor. This is relatively inexpensive. Otherwise you will need a new motor.

Nov 11, 2014 | Heating & Cooling

1 Answer

Is it cost effective to replace draft inducer blower on 22 year old furnace?


Depends on the cost to repair. Probably a 22 year old furnace is not very efficient also. Take every thing into consideration.
If it still works it may work for a while but you don't want a break down in the middle of winter.

Nov 07, 2014 | Heating & Cooling

1 Answer

I have a Coleman Evcon electric furnace, the blower fan runs constantly and I have to shut the breaker off inside the front cover to turn it off. The switch is on auto and it runs even when the thermostat...


It could be a thermostat problem. Also it will seem to run constantly as it tries to heat and one of the elements are working which could be a sequencer problem.

Nov 28, 2013 | Heating & Cooling

Not finding what you are looking for?
Desa International Blower Glow Warm Wall Heater Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Desa International Heating & Cooling Experts

paulcarew

Level 3 Expert

2046 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Gil Shultz

Level 3 Expert

3320 Answers

Are you a Desa International Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...