Question about Canon PowerShot A60 Digital Camera

1 Answer

PowerShot A60. When I turn it on, the Canon Logo appeared in LCD screen, and then it shows blank. It does have a light but blank screen. Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I turn my PowerShot A85 on the Canon Logo appears on the screen for a second then the screen goes blank. I can still take a picture, but can't use the display. Any suggestions? Thanks.


Does your camera have a button or switch on it that says something like this: "LCD Backlight" and "On/Off" for the toggle switch that goes with that LCD Backlight?
If I turn off the LCD Backlight on my digital camera, I cannot see anything, but I can take pictures anyway. When I turn that Backlight back on, I see everything I point the camera at, and can take pictures without problems.
The Backlight helps you to see what it is at which your are pointing your camera.
Makes a big difference. And you can accidentally hit that switch and turn it off without being aware you have done so.
-a.

Nov 19, 2009 | Canon PowerShot A85 Digital Camera

1 Answer

Canon PowerShot A85 has a blank screen


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check this link for more info.

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 30/30a/200a/300a/D320/400/ 450/500

Jul 25, 2009 | Canon PowerShot A85 Digital Camera

1 Answer

Canon PowerShot A60~~~Viewing screen black/fuzzy won't take pict.


Its known problem of ccd imager in Canon A60 camera and Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.

Jul 24, 2009 | Canon PowerShot A60 Digital Camera

1 Answer

Flashing lights on screen


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
 
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
 
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

May 26, 2009 | Canon PowerShot A70 Digital Camera

1 Answer

Canon a60


This is due to iris problem ... the iris does not open .... so hence nothing is seen and nothing is recorded .... try lightly slapping the camera from the left side ...... if it works fine other wise show it to a repairman ...

Oct 20, 2008 | Canon PowerShot A60 Digital Camera

1 Answer

No image in lcd viewfinder


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

May 25, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

Canon powershot a60 white lcd/no photo


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Mar 10, 2008 | Canon PowerShot A60 Digital Camera

1 Answer

Canon PowerShot Dropped: Blank Screen


For Ravi, this definitely sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110
By the way, don't tell Canon that you dropped the camera. Sounds like the CCD imager was about to go bad anyway, and the drop just accelerated this.

Oct 31, 2007 | Canon PowerShot S230 / IXUS 179 Digital...

2 Answers

Canon Powershot A60 Digi Cam


your problem isinternal circuit fault the recording section is not working. which is not giving any signal to LCD . you nee dto give itr in service centre. fault may also come in change over switch which is not giving connection to LCD. Sangita

Jun 22, 2007 | Canon PowerShot A75 Digital Camera

Not finding what you are looking for?
Canon PowerShot A60 Digital Camera Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...