Question about RCA 27V530T 27" TV

1 Answer

Locked RCA TV 27V530T

It ask for the password.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it’s self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Posted on Jun 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I over ride the password setting


Hello
I thinks that you have forgotten the password. There is a way to reset it.
[1] Make sure the your TV is on standby condition. That is make it standby with the help of remote handset.
[2] Press Volume _ [negative button] on the TVs Front panel and then the "Clear" button on your remote handset for approximately 5 seconds. Keep both of them pressed at the same time during this 5 seconds. The TV will turn back on.
[3] Enter a new password on the next time you access the PARENTAL CONTROL or the TIME menu.

Oct 20, 2010 | RCA 27V530T 27" TV

1 Answer

Need a password


try the default coed witch is either 0000 or 1234 they use those codes for the TV to lock them with the parentol controls

hope that i could help!!

Jul 23, 2010 | RCA 27V530T 27" TV

1 Answer

Went to menu and locked the t.v up how do i get it working again when t.v is off


The only way to turn it on is with the remote power button. Then go to the FPA lock and turn it off. If it won't come on with the remote, something is wrong internally with the set. Have a repair shop check it out.

Oct 14, 2009 | RCA 27V530T 27" TV

1 Answer

Digital turner or not


CONVERTER BOXES are For those who use a antenna to receive a Free Signal Channels.So if you have Cable or Satellite this will NOT have any affect on what you are now receiving.

Sep 10, 2008 | RCA 27V530T 27" TV

2 Answers

RCA 27V530T Powers up and plays perfect for about 5 min then shuts off


look for cold solder joints on primary side of power supply

Jul 01, 2008 | RCA 27V530T 27" TV

1 Answer

27v530t


Two replace a verticale ic which is common for verticale problem.. It requires replacing a part not adjustment . I charge at my office is around 95,00 dollars to 120.00 dollars.

Thanks doctor video

May 11, 2008 | RCA 27V530T 27" TV

1 Answer

Unusable Signal


I have exactly the same problem, with my RCA F27645. I can find no answers on the internet, so far.

I have 3 ideas.

1) The digital signal receiver must not be receiving the DVD signal properly.

2) Coaxial cable receiver (the little pin plug) problem

3) Digital TV (broadcasts) causing havoc on older TVs.

Mar 27, 2008 | RCA 27V530T 27" TV

2 Answers

Parental Lock Code


If you forget your password you can reset it. Make sure the
TV is off. Simultaneously press and hold VOL< on the TV’s front
panel and CLEAR on the remote for approximately 5 seconds. Enter
a new password next time you access the PARENTAL CONTROL
menu.

Jan 28, 2008 | RCA 27V530T 27" TV

Not finding what you are looking for?
RCA 27V530T 27" TV Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...