Question about E-Machines eMachines Monitor E15T4

2 Answers

Auto Processing message flashing and screen twitching

Help...this is so annoying...the message "Auto processing" keeps flashing in the middle of my monitor screen and the picture twitches...what do I need to do to fix this?...please advise...thanks!

Posted by on

  • 2 more comments 
  • wr3int Jul 05, 2008

    We tried everything in terms of cleanup without success.

  • Anonymous Jan 25, 2009

    I have the exact same problem and if I push the button on the side of the monitor where the menu and adjustments are it will stop for a couple of seconds then starts back. I have unplugged and put in safe mode and does the same thing. Also when turning on I noticed that the initial screen with Microsoft loading is cut short on the side. Please help someone, this is not a good time to have to put out alot of money for me, but I need my computer.

  • arty796 Apr 19, 2009

    my monitor keeps flashing auto processing. how do i get rid of it

  • Eric Smale
    Eric Smale May 11, 2010

    Does it do this even at the initial boot screen (BIOS screen - when you first turn on the computer) or only when Windows comes up? If it is when Windows boots, it could be your resolution or refresh rate. If you boot into Safe Mode (by pressing F8 before Windows starts up, a menu will come up... select Safe Mode), do you get the twitchy picture? Please let me know so I can possibly help you further.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I got rid of the "Auto processing" flashing on my monitor by just firmly TAPING DOWN THE MENU BUTTON ON THE SIDE! yeaaaaaa!

Posted on Apr 01, 2009

  • lively13 May 07, 2013

    too my surprise it worked. finally stopped flashing after I held down the menu button, it clicked off signed back in, so far so good. Thanks

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

How do i git rid of this message on my screen saying auto processing

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My OCD/ processing auto configuration keeps flashing on and off on my screen how do I stop it?


check the system for viruses ..

try using a different user account ... see if the problem persists in safe mode ..

if that does not help, then call 1-877-805-1027 for expert help.

Jul 17, 2015 | Gateway Computers & Internet

1 Answer

Message from display FPD 1730 won't go away


press the menu button on screen panel and press exit.

Dec 02, 2009 | Gateway FPD 1730 17" Flat Panel LCD...

1 Answer

How can i resolve this annoying problem???? Windows - No Disk , Exception Processing Message C0000013 Parameters 75b6bf7c 475b6bf7c 75b6bf7c ' error keeps on popping up on the screen.


Hi,

Use a regsitry mechanic software to solve this problem as it is associated with registry itself

Thank U

Please rate me as it wil cost u just one click

Oct 23, 2009 | Microsoft Windows XP Home Edition

1 Answer

Auto Processing


There is nothing just update your antivirus and check your system for virus

Feb 27, 2009 | E-Machines eMachines Desktop PC

1 Answer

Processing auto configuration


Check your settings in "Power Options Properties".
Control panel/ power options/ advanced/ under power buttons make sure you have "shut down" when you press the power button on your computer.
I hope I am understanding your problem correctly. If not pls. explain what you mean by and when processing auto config. keeps flashing. Is there a black screen or a windows interface?

Nov 18, 2008 | Acer AL1711 17" LCD Monitor

3 Answers

Monitor will not turn off and keeps flashing the words Auto processing


it is not a bad rom. if it was a rom it would constantly act up but it only acts up upon overheating. The solution is difficult but if you open the monitor you can find all of the heatsinks take them of and replace them with bigger ones. or have a fan blowing on it at all time it is active i added bigger heatsinks to my emachine le1799 and it solved this problem of pulling up menu and changing setting by itself and the lack of the ability to turn power of.

Sep 15, 2008 | HP Pavilion F1503 15" LCD Flat Panel...

1 Answer

Monitor keeps flashing "Auto processing"


Hi

Do a factory or monitor reset from the monitor menu.

Jan 01, 2008 | Gateway FPD1975W 19" LCD Monitor

2 Answers

"Processing Auto Configuration" keeps showing up on my screen.


It solved by fixing 1024X786 pixel solution.if it not possible by fixing it..
Then look over the VGA driver is correctly support or not
if not then you have to update the VGA (Display) by drivers

By
Murugeshkumar.k

Dec 24, 2007 | Gateway FPD1530 15" Flat Panel LCD Monitor

2 Answers

Monitor message


hello this is nichu ,your monitor is not supporting your cpu .hence you are getting the message "processing auto config message from screen display".either you have to change your monitor or you have to change your cpu.next time while purchasing the pc get the help your hardware vendor to check out the compatibility

Nov 04, 2007 | Gateway FPD1530 15" TFT LCD Flat Panel...

Not finding what you are looking for?
E-Machines eMachines Monitor E15T4 Logo

4,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...