Question about Brady LABELIZER PLUS INDUSTRL SYSTEM Printer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Epsom Stylus Photo R300
Yes I had a similar problem and in fact returned my printer for a replacement. You need clearance as the CD tray emerges some 2.5 to 3 inches behind the printer. If the tray hits an obstacle it is unable to correctly line up for printing and the trat is rejected
Posted on Jul 06, 2009
mmm...Maybe try updating the firmware. That printer is a Zebra Z96XiIII Plus printer. Zebra made a change in their code for the onboard clock in version 126.96.36.199 See if you have that version and if not, you can to to www.zebra.com and download firmware for the printer.
Hope that helps !
Posted on Apr 26, 2010
SOURCE: Brady ID Pal. Display says:
Brady printers have a sensor that reads information from the cartridge. The printer will not work if a connection cannot be made to the cartridge.The most common cause of failure is in the cartridge and switching to a different cartridge usually fixes that problem. Having the same problem with two cartridges is starting to indicate there is a failure in the printer, although it is possible (but not likely) to have two cartridges in row fail. A good first step is to be sure the printer is clean. If that doesn't work you'll most likely need to send your printer in for repair. A good source of free tech. support for the Brady ID Pal is Graphic Products. They even help people who are not their customers, They also do Brady printer cleaning and some repairs. They have an online for for requesting tech. support located at: http://www.graphicproducts.com/request-support.php or you can call 1-888-326-9244.
Posted on May 25, 2010
It could either be a faulty smart cell on th elabel cartridge or the smart cell reader on the printer. Confirm by using different types of label rolls. If same problem repeats, the smart cell reader will have to be replaced by a qualified serice personnel.
Posted on Aug 14, 2010
Tips for a great answer:
Apr 02, 2015 | Brady TLS 2200 Label Printer
Jul 28, 2011 | Brady LABELIZER PLUS INDUSTRL SYSTEM...
Feb 08, 2011 | Brady LABELIZER PLUS INDUSTRL SYSTEM...
Dec 09, 2010 | Brady LS 2000 Matrix Label Printer
Dec 02, 2010 | Brady LABELIZER PLUS INDUSTRL SYSTEM...
Apr 26, 2010 | Brady BP-THT-600X+ Thermal Label Printer
Jan 07, 2010 | Brady LABELIZER PLUS INDUSTRL SYSTEM...
Jan 06, 2010 | Brady TLS 2200 Label Printer
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: