Question about Sony KV-27FV16 TV

1 Answer

Sony KV-27FV16 no sound

We have used this tv for several years with the internal speakers turned off via the Audio setup menu and piped the sound thru our 5.1 surround sound system so we have never used the internal speakers except during the first installation.

Now when we turn on the internal speakers there is no sound.
The set has been serviced once - the fly-back transformer replaced.

Is it possible that the service tech left the wires to the speakers off when he had the covers off the set?

Posted by on

  • bnfoat May 17, 2008

    Yes, I had gone into the TV Menu and turned on the Internal Speakers, but they did not come on.



    I finally got the courage to take off the back cover, 19 screws, and found the cable that connects the two speakers was disconnected from the main board. I found where it should have been and plugged it in. Success!



    Thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Try going into the audio settings part in your menu and select reset audio settings.

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SONY TV KV-20S42 NO SOUND


go thru the menu and see if the speakers were turned off (to accomidate a surround or other audio device).
Thats what happened to mine... and I only found out after I replaced it and my kids were playoing around with it...

Dec 21, 2011 | Sony KV-20S42 TV

2 Answers

Sound


You should be able to do so through the menu on the TV. Look for a "MENU" button of some sort on the TV/Remote, then scroll through the settings.

Mar 24, 2008 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

Just bought a Sony KV-27ts20 second hand. Great


There might be another solution beside the trash can. You see often with audio problem the fault is the audio output i.c that is gone. Also in the tv menu you may have speaker on/off, make sure they are on. If it still doesn`t work then you may want to try the audio out connectors at the back of the set,there may be sound there. What you`ll need is and audio system with aux/cd/tape input and a rca/phono stereo cable. Just connect the tv out to any free input and turn up the volume .
By the way the tv audio out may be variable(option in the audio menu) which means that any amplified speakers(computer speakers) could be used as long as you have rca connectors on the end of it.
Hope this will help. Good luck

Dec 04, 2009 | Sony FD Trinitron WEGA KV-27HS420 27" TV

1 Answer

No sound or picture


Hello,
I'm not sure if you solved your technical issue or not, but if your TV is still broken, I would be interested in buying the door that covers the AV inputs. This door is on the front of the TV. Unfortunately, mine broke, and it's been difficult to find a replacement. If you are interested, I can be reached at (612) 801-5752 or by email at tremely@mac.com. Thanks.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Please Help


call a tech your tv needs to to be repaired the problem is in the power supply and related circuit.good luck.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Please Help


Is the red light flashing a code ? exaple 4 blinks pause 4 blinks ?

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Sony 27"TV will not turn on


The picture tube on your tv is dead, you need to replace it. It probably will be worthing just purchasing a new set, because the cost of repairing it will be close to the purchase of a new one.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

No sound or picture now


The set may have shorted the horizontal out put transistor since it kept coming on sometimes. This could be cause by the driver transformer arcing causing a "spike" in voltage going to you horizoltal out put transistor. Stargazer

Mar 31, 2007 | Sony KV-27FV16 TV

1 Answer

No picture just clicking sound


with your model number manny have a defective flyback part number is 1-453-310-11

regards,
daniel.

Mar 31, 2007 | Sony KV-27FV16 TV

1 Answer

TV solution


You may have a bad solder joint on the horizontal driver transformer or somewhere else in the set. I found this problem with this transformer several times. Stargazer

Mar 31, 2007 | Sony KV-27FV16 TV

Not finding what you are looking for?
Sony KV-27FV16 TV Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...