Question about Whirlpool LSQ9600L Top Load Washer

1 Answer

Washer does not agitate during wash or rinse cycle. I can push the center spindle to the side and it starts to agetate, but when I release the pressure it stops.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,430 Answers

This is usually the agitator dogs have worn out or broke. These are very inexpensive and easy to replace. There is a video at http://appliancehelponline.com/topagitatorvideo.html this will walk you thru the proper inspecting and replacement of these parts. You can also enter your model # for diagrams and illustrations of your specific model. Not all models are available. All parts come with installation instructions.

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer squeaks during agitation, both wash and rinse. also makes thumping sound for few seconds after spin cycle stops.


Hello Chris, thank you for your post!
I see that the washer on your Frigidaire laundry center is squealing during agitation. This noise could be coming from the motor or transmission and you may need to have the washer disassembled to locate which component may be causing the issue. For proper disassembly you may need to seek assistance from a professional technician. A technician will have the appropriate tools needed for complete disassembly of the washer without causing personal injury or harm to the laundry center. Hopefully this information is helpful towards your repair. -Matt

Apr 20, 2016 | Frigidaire fex831cs stacked washer&dryer...

1 Answer

Limited agitation during wash cycle Load Sense OK


Possible that the program selected is an easy wash as this is meant for daily wash , less soiled clothes.
If however the same situation is present in all the cycles then the capacitor to the motor must be checked as it can reduce the speed of the motor.
Also check the belt , check for friction on the drum spindle and the motor.

Jul 22, 2011 | LG WT5001CW Washer

1 Answer

Will not spin on any rinse cycle


Hi, This washer does not have a belt. While the washer is agitating, if you lift the lid will it stop? Some models will agitate but not spin if the lid is up. It sounds to me like the lid switch might be going bad.
If you will get me a model #, I can look this up for you and give you a better idea.

Vic

Jul 05, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washing machine not agitating during wash cycle. Only when rinse


This occurs when your transmission has failed & requires replacement.... Good luck!... Bill

Apr 28, 2009 | Maytag MAV4755 Top Load Washer

1 Answer

Basin will not fill with water during rinse cycle but will agitate and spin.


most new washers have cold water only rinse and spray rinse ck cold water coming into machine during wash if no cold comes in suspect cold side of fill vale not opening ..could be wiring issue or a bad valve

Oct 24, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer does nothing during rinse then leaks during spin cycle


hi thanks for the question i would check the drain hose your problem is the washer is not draining check the drain hose thanks the appliance doc

Sep 27, 2008 | Maytag Atlantis MAV6000 Top Load Washer

3 Answers

Agitator Not Working


check your motor coupler, lid switch

Nov 08, 2006 | Hotpoint VBXR1090D Top Load Washer

Not finding what you are looking for?
Whirlpool LSQ9600L Top Load Washer Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...