Question about Skil 10" Table Saw 3400
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would check to see that ID of the blade arbor matches the OD of the motor arbor, and you are not missing an adapter ring. Then I would get some acetone and a wire brush clean all surfaces where the blade seats. This is also good practice for Jacobs chucks on drills, that allow the drill bits to spin.
Posted on Aug 04, 2009
SOURCE: looking for cost of replacement
i looked online at places I get parts from. Neither listed the motor as a part the had the aramature for about $70 and the field for about $35. Have you tried the reset button? also it may just need new brushes.(if you see lots of sparks at the end of the motor opposite the blade, look through the air vent slots it is likely the brushes, unplug the saw, and take them out and replace them HERE is a blow up ) the I would think that if the saw is well used and the motor has burnt out. It may be a lost cause. I am not sure what the price of this was new but you can get a reconditioned saw from Amazon for 135 bucks. And it is a 15 amp saw.
Posted on Dec 07, 2010
Tips for a great answer:
Jan 13, 2017 | Craftsman Saws
May 13, 2015 | Craftsman 10" Table Saw
Jan 25, 2014 | Craftsman Sears 10" Table Saw Motor 62505
Feb 18, 2011 | Craftsman 10" Table Saw
Apr 09, 2010 | Craftsman 10" Table Saw
Jan 26, 2010 | Craftsman 10" Table Saw
Oct 21, 2009 | Craftsman 10" Table Saw
Jul 18, 2009 | Craftsman 10" Table Saw
Apr 16, 2009 | Craftsman 10" Table Saw
Nov 13, 2013 | Skil 10" Table Saw 3400
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: