Question about HP PSC 1350v All-In-One InkJet Printer

2 Answers

Hp psc 1350 -check cartridge

I have a hp 1350 all in one printer and the check print catridge light is flashing orange and I have a E for the number of copies. I tried doing the steps of manual resetting the alignment by pressing cancel and on at the same time/cancel/copies/paper type/color/start copy and my printer still will not working and is still indicating the E and check print catridge light. Can u help?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The positioning tape inside the printer may be dirty. it's a clear little plastic tape that runs along the printing head that tells the printer where its head is. It has to be CLEAN. I use 70% rubbing alcohol and a tissue or some q-tips.

Good luck.

Posted on Aug 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 246 Answers

Power off switch for a 5 minute .

It doesn't work try to reinstall the printer driver

Or check whether the printer cartridge is fit well in the printer

Posted on Jul 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Orange cartridge light is flashing. I know the black cartridge is empty, but the colour cartridge is o.k. Why can't I print in colour?


Inkjet printers use a combination of inks to produce colors; while you may not realize it, your printer uses black ink to print colors as well, to darken the hue of a color. Otherwise, it would be limited to very "bright" colors. Replace the black cartridge, you will be fine.

Mar 05, 2010 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

My printer hp psc 1350 keep on blinking check print catridge even after change new catridge both colour and black..how to settle?


Tried removing the cartridges again, then turn off you printer for 2 mins.

clean the print nozzles of the cartridges, turn the printer on
insert the cartridges again, then check if the problem persist.

You can also try to put the original cartridges that came with the printer
to isolate the problem, if it's really the ink cartridges.

Feb 25, 2010 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

I have refilled ink in the hp 1350 but the orange light is still flashing beside Check print cartridge and i cant print


Those cartridges have electronics inside to tell the printer when they are empty, there's no guage inside the cartridge. Online you might find ways to reset your cartridge, but the best is to buy a new cartridge.

Jan 10, 2010 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

Ink cartridges stuck after replacement


HP PSC 1350.

Very sensitive printer. Due to dust, the catrdges are getting stuck at right side. Please clean the steel roller where the catridges are rested. Clean it with nice cloth and if possible put 3-in-1 oil in that area only for the smooth flow of catridges in that steel stem or roller.

This might happen iif we are not installing the orignal and genuine catridges and there is a chance of ink gettng leaked onto the printer.

Kind advise is if the printer is old, please put an annual maintenace service contract with local authorized hp Printer Dealer which will solve your problem once for all.

have a nice and good working day.

Jul 16, 2009 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

The check print cartridge light keeps flashing


I replace a new cartridge and the print light still flashing

Aug 14, 2008 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

Printing light blue will full ink


its either the catridge head is bad or yr new ink isnt too good although its new it still can go bad. now try using menthylated spirit sucked in a tooth brush thats not too hard . use it to clean the inside of the cartridge head. that is those spots inside. cos atimes dirty could cause such problems. so try it out.
hope this helps
thanks

May 31, 2008 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

HP psc check print cartridge light is flashing


The "E" means a cartridge problem.

Have you recently changed them?

If so, did yo use "refills" or another non-HP cartridges?

Jan 11, 2008 | HP PSC 1350 All-In-One Thermal Printer

Not finding what you are looking for?
HP PSC 1350v All-In-One InkJet Printer Logo

873 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...