Question about Televison & Video

2 Answers

Tv comes on for about 5 to 10 seconds no pic just sound then hear relay click back off get 5 blinks and 10 blinks

Posted by on

  • 3 more comments 
  • tntlni Sep 14, 2010

    it is a sony kdp-51ws550 hdtv 2005

  • tntlni Sep 14, 2010

    are you still there ?

  • tntlni Sep 14, 2010

    i have a sony kdp-51ws550 it comes on for about 5 to 10 seconds no pic just sound i hear a relay and then it shuts down i get 5 blinks and 10 blinks

  • tntlni Sep 14, 2010

    tv comes on for about 5 to 10 seconds no pic just sound then hear relay click back off get 5 blinks and 10 blinks

  • tntlni Sep 14, 2010

    how costly is this board and easily availiable to find

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

OK, so its Sony KDP--51WS550
5 times blink shows problem with no good performance of any picture tube in tv as it has three inside.
10 times blink shows problem with High Voltage section.
Basically your tv has defective D Board that need to be replaced and if you are expert in electronics stuff repair then can repair it on component level.
Let me know if you have additional question.
Thanks.

Posted on Sep 14, 2010

  • Shahid Electronics
    Shahid Electronics Sep 14, 2010

    D board part number is as follows as per service manual:
    A1302161A........ D BOARD, COMPLETE

    and it is available with Sony Part Store with replacement number as under for $125
    9910999Y2
    Click Sony Part Store link, put any of above part numbers in search box and hit Search Red Button to get info
    Hope this will help you.
    Thanks.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

First off what is the make and model of the tv and how long have you owned it? Once I have that information I can assist you further.
Thank you,
Lee

Posted on Sep 14, 2010

  • 1 more comment 
  • Lee A.
    Lee A. Sep 14, 2010

    This is a comment based system, please allow some time before passing on my assistance.
    Thanks,
    Lee

  • Lee A.
    Lee A. Sep 14, 2010

    Most likely this is a shorted CRT problem in the tv. It is also possible it is the power supply or D board. You will definitely want to have the tv repaired by a professional unless you have quite a bit of diagnostic and electronics repair expertise.
    Thank you,
    Lee

  • Lee A.
    Lee A. Sep 14, 2010

    Well I would first have a professional diagnose the problem first hand unless you want to just throw parts at the problem, and no they aren't "readily" available.
    Thank you,
    Lee

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV goes to blank screen standby after one second of normal functioning green power light on. When in standby state, the TV is blank like it's off and the red standby light blinks FOUR times.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Oct 16, 2015 | Sony Bravia KDL-46V4100 46 in. LCD HDTV

1 Answer

Magnavox plasma television will not turn on, makes


Relays clicking noise you hear.....change caps..you might see visible signs of CAPs being bad....swolen,,, top ready to explode etc.

May 19, 2010 | SNK Magnavox 42MF231D 42 in. Plasma TV

1 Answer

Maganavox flat screen tv no pic, red light blink codes...


Those blinks are fault codes. To know more visit the site linked here. http://electronicshelponline.blogspot.com/

Mar 25, 2017 | Televison & Video

2 Answers

Tv won't turn on. blinking red light in lower left corner


unplug the television...wait 10 seconds and then plug back in....if you listen carefully after 5-10 seconds you will hear a click sound (the same sound that you hear when you turn on or off) ...once you have heard it, turn the TV on again using the remote. Do not turn on until you hear the click. If this does not work, try again but turn the TV on again before you hear the click. I dont know why it happens but it is as if the TV gets confused as to whether its supposed to be on or off. Most of the time, the solution is to turn it on after the click so I would always try that first.

Feb 14, 2010 | Panasonic TC-32LX700 Television

1 Answer

No picture on my philips 42PF7321D/37


Bad caps in the power supply must be replaced .

Jul 21, 2009 | Philips 42PF7320A 42 in. Plasma HDTV

2 Answers

Mitsubishi WS-55909 dm board repair


I have the same TV and the error light code on my set is 22

May 31, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

KP-57WS500 8 blinks will not power on


8 blink error code is usually indicating that the HV transformer ( Flyback) is faulty on the D board. You can get a replacement flyback at the following link with free tech support to explain how to replace it. Heres a link to the correct Flyback for the KP51-65WS500 model sonys.
http://servicemanuals.vstore.ca/product_info.php/pName/sony-flyback-145328541/cName/flybacks

Jan 04, 2009 | Televison & Video

1 Answer

Startup Problem with my 42pf7321d/37 Phillips plasma TV


I need to know how long do you have the tv?In the other word,approx. how many hours you have put into it?
Secondly,did you wall mounted the tv or setting it close the the area which there is not much room for the back of your tv to breath?
solutiondoct

Nov 06, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...