Question about Acer PD726W Projector

Open Question

INFOCUS X2 Projector

Where can I find pc boards for this projector. Part no. 510 - 1894 -01

Posted by on

5 Suggested Answers

Marrie
  • 563 Answers

SOURCE: no power to fan

Hi There

If this problem still persists after replacing the fans , you should check the Powerboard that supplies the fans power.

Posted on Mar 26, 2008

SOURCE: toshiba portege m600 cannot connect to projector ACER PD525

you can extend the display to the projector through desktop settings

Posted on Jul 15, 2008

projdoc
  • 2236 Answers

SOURCE: Infocus projector power supply dead

the caps dry out. look for bulging caps. you won't find a schematic for the ps boards. infocus had someone else make them. the problem seems more like a overheating issue. as for the other one with the "just the fans", check the colorwheel.

Posted on Sep 04, 2009

projdoc
  • 2236 Answers

SOURCE: Infocus projector power supply parts

you won't find schematics for them. infocus had their boards made by someone else who now no longer makes boards. it's usually the caps drying out that causes power problems.

Posted on Sep 04, 2009

  • 269 Answers

SOURCE: jammed projector lens infocus lp770

get a wide bladed flathead and find the widest part of the **** between the focus ring and zoom. work the blade like you are trying to widen the the slot, do this all the way around till it pops back into place.

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the colour wheel


remove the rear panel, front panel, and top. the colorwheel is between the lens and the lamp. removing it is easy, but to unplug it, you need to remove the 2 power boards, the shield, and the fan/lamp housing assembly. there is a tip on this site with a detailed description on replacing it. it's under infocus x2. the x2 and the sp4805 are basically the same machine.

Dec 29, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Infocus X2 projector, white vertical strip on right quadrant.


on the X2, the dmd chip is attached to the main board on the bottom of the machine. you need to take the top case off, as well as the 2 power supply boards. push the dmd chip (behind the lens assembly) back onto the board.

Jun 04, 2009 | InFocus LP120 / 1000 Lumens / XGA / DLP...

2 Answers

Infocus projector power supply parts


you won't find schematics for them. infocus had their boards made by someone else who now no longer makes boards. it's usually the caps drying out that causes power problems.

Nov 03, 2008 | NEC VT670 Multimedia Projector

1 Answer

Infocus X2 searches won't display desktop


Hello,
In the projector's menu under "sources" make sure that the box to the right of "Computer" is checked. Also check the box at the bottom of that page that says "auto source select" or something. But it is the last thing on that menu and should be checked.

Cheers

Oct 20, 2008 | InFocus LP120 / 1000 Lumens / XGA / DLP...

2 Answers

Infocus projector power supply dead


the caps dry out. look for bulging caps. you won't find a schematic for the ps boards. infocus had someone else make them. the problem seems more like a overheating issue. as for the other one with the "just the fans", check the colorwheel.

Oct 03, 2008 | InFocus POWER SUPPLY CORD Multimedia...

1 Answer

Infocus x2


first try another computer cable. if same results, press the "auto image" button on the projector. if that doesn't work, press menu, select settings, then factory reset, and "yes". if you still have the same problem, the eca (main board) is bad.

Sep 01, 2008 | InFocus X1 Multimedia Projector

1 Answer

In need of new controller board???


The cost of a new controller is prohibitive. If you have to replace that, you may as well replace the projector. It is the second most expensive part in the projector, the optical engine being the most expensive. Last time I checked, a new Controller Board assy is in the neighborhood of $800 - $900.

Feb 01, 2008 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

2 bulbs blown.


To be honest, most people who experience short lamp life on the Infocus X2 is on the genuine infocus lamps. If you read the user opinions here, you'll know what I mean. Me personally think that the X2 lamp filter some how manage to block the vents with dust which results in inefficient cooling in effect reducing the life of the lamp. The best thing to do is vacuum the lamp filters regularly and stick to cheap lamps as the oem ones on the Infocus X2 are also no good. Or better still, just replaace the bulb on it's own from here and save a lot of money.

Jan 26, 2008 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

X2 board


ebay has several that need bulbs... just a thought here is one of the item numbers Item number: 270207032811

Jan 23, 2008 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Infocus x2 dose nothing


Assuming the power outlet and cable is OK the most likely problem is the power supply and needs to be replaced.

Dec 06, 2007 | InFocus X1 Multimedia Projector

Not finding what you are looking for?
Acer PD726W Projector Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

61160 Answers

meteshadow

Level 3 Expert

489 Answers

Are you an Acer Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...