Question about Heating & Cooling

1 Answer

RB-86 Qrum Transmitter

The other day I was getting ready for initialization and my KREC was under 3. This shouldn't happen I know, what could be the issue? I checked my KREC counter and it seemed to be calibrated properly.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need installation info for my compressor Fujita 2.5 HP, 18,000 BTU. Can anyone help? Emma7

Posted on May 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model c87214. Why does it keep losing outdoor temp signal?


I have had that experience. You may have to repeat initial installation once more before concluding the system is n.g. Remove batteries from the indoor receiver. Review the instructions and verify transmitter was installed in correct location. Do this as you are removing transmitter batteries. For luck, install new batteries in the transmitter. At the receiver, reinstall batteries (or install new batteries). After approx. 10 min., you should see temperature displayed. My LaCrosse system has its wacky days, sometimes displaying no temperature or an abnormally high temperature when morning sun hits the transmitter. Also, successfully resetting is a once-in-a-blue-moon affair.

Dec 28, 2015 | Measuring Tools & Sensors

1 Answer

How do you turn on the outside Remote senor, I have change the batteries


After a battery change, the transmitter has to initialize and begin transmitting data. This may require several minutes. If nothing happens after that period, the replacement batteries may be defective or installed incorrectly or the transmitter may be defective.

Feb 05, 2015 | Measuring Tools & Sensors

1 Answer

Grand theft auto cheat codes


Invincibility
While playing the game, quickly press Right, A, Right, Left, Right, RB, Right, Left, A, Y to be invincible for five minutes. You must enter the code again after five minutes to reactive invincibility. Note: This code does not make vehicles invincible.

Full health and armor
While playing the game, quickly press B, LB, Y, RT, A, X, B, Right, X, LB(3).

Give weapons and extra ammo
While playing the game, quickly press Y, RT, Left, LB, A, Right, Y, Down, X, LB(3) to get extra ammunition and the assault rifle, grenade, knife, pistol, RPG, sawed off shotgun, SMG, and sniper rifle.

Lower wanted level
While playing the game, quickly press RB(2), B, RT, Right, Left, Right, Left, Right, Left.

Raise wanted level
While playing the game, quickly press RB(2), B, RT, Left, Right, Left, Right, Left, Right.

Recharge special ability
While playing the game, quickly press A(2), X, RB, LB, A, Right, Left, A.

Super jump
While playing the game, quickly press Left(2), Y(2), Right(2), Left, Right, X, RB, RT. Hold X to jump very high.

Faster run
While playing the game, quickly press Y, Left, Right(2), LT, LB, X.

Faster swim
While playing the game, quickly press Left(2), LB, Right(2), RT, Left, LT, Right.

Flaming bullets
While playing the game, quickly press LB, RB, X, RB, Left, RT, RB, Left, X, Right, LB(2).

Explosive bullets
While playing the game, quickly press Right, X, A, Left, RB, RT, Left, Right(2), LB(3).

Explosive melee attacks
While playing the game, quickly press Right, Left, A, Y, RB, B(3), LT.

Slow-motion aim
While playing the game, quickly press X, LT, RB, Y, Left, X, LT, Right, A. The code can be entered up to three times to increase its effect. Enter it a fourth time to disable the code.

Moon gravity
While playing the game, quickly press Left(2), LB, RB, LB, Right, Left, LB, Left. Enter a vehicle after enabling this code to experience less gravity. Press B after jumping to float.

Slidey cars
While playing the game, quickly press Y, RB(2), Left, RB, LB, RT, LB.

Spawn BMX bike
While playing the game, quickly press Left(2), Right(2), Left, Right, X, B, Y, RB, RT.

Spawn Buzzard (small attack helicopter)
While playing the game, quickly press B(2), LB, B(3), LB, LT, RB, Y, B, Y. The Buzzard is a helicopter with missiles and guns. It must be spawned in a large enough area for it to appear, or it will not spawn.

Spawn Caddy (golf cart)
While playing the game, quickly press B, LB, Left, RB, LT, A, RB, LB, B, A.

Spawn Comet (two door sports car)
While playing the game, quickly press RB, B, RT, Right, LB, LT, A(2), X, RB.

Spawn Duster (crop duster plane)
While playing the game, quickly press Right, Left, RB(3), Left, Y(2), A, B, LB(2).

Spawn Limo (limousine)
While playing the game, quickly press RT, Right, LT, Left(2), RB, LB, B, Right.

Spawn parachute
While playing the game, quickly press Left, Right, LB, LT, RB, RT(2), Left(2), Right, LB.

Spawn PCJ-600 motorcycle
While playing the game, quickly press RB, Right, Left, Right, RT, Left, Right, X, Right, LT, LB(2).

Spawn Rapid GT (two door sports car)
While playing the game, quickly press RT, LB, B, Right, LB, RB, Right, Left, B, RT.

Spawn Sanchez (dual-sport dirt bike)
While playing the game, quickly press B, A, LB, B(2), LB, B, RB, RT, LT, LB(2).

Spawn Stunt Plane (fixed-wing stunt plane)
While playing the game, quickly press B, Right, LB, LT, Left, RB, LB(2), Left(2), A, Y.

Spawn Trashmaster (garbage truck)
While playing the game, quickly press B, RB, B, RB, Left(2), RB, LB, B, Right.

Skyfall
While playing the game, quickly press LB, LT, RB, RT, Left, Right, Left, Right, LB, LT, RB, RT, Left, Right, Left, Right. This cheat code spawns you in the air for a skydive free fall. If you hold the Analog-stick, you can glide for a long time. However, it does not allow you to use the parachute. Thus, you will usually die at the end of the free fall. It is possible to survive, but you will have very little health remaining. The best way to survive is to do a direct vertical faceplant. If you can survive the fall, this cheat is very useful for fast traveling around the map.

Drunk mode
While playing the game, quickly press Y, Right(2), Left, Right, X, B, Left.

Slow-motion mode
While playing the game, quickly press Y, Left, Right(2), X, RT, RB. The code can be entered up to four times to increase its effect. Enter it a fifth time to disable the code.

Change weather
While playing the game, quickly press RT, A, LB(2), LT(3), X. Each time the code is entered, it rotates through sunny, clear, cloudy, smoggy, overcast, rainy, thundering, clearing, and snowing weather.

Feb 19, 2014 | Microsoft Xbox 360 Console

1 Answer

Programming the APS02BT2 remote


TO PROGRAM ADDITIONAL TRANSMITTERS:
1. Enter the vehicle, and turn the ignition key to the "on" position.
2. Press and release the valet push-button switch three times.
3. The dash LED will flash once, and the siren will "chirp" once, indicating the system is ready to accept programming for channel 1 or the arm/disarm and panic functions.
4. You can assign any of the three transmitter button functions listed below to channel 1.
a. Pressing button #1 on the keychain transmitter.
b. Pressing button #2 on the keychain transmitter.
c. Pressing both buttons simultaneously on the keychain transmitter.
5. Press and hold the selected choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of channel 1 was successful.
6. Press and release the valet push-button switch one time.
7. The dash mounted LED will flash 2 times, and the siren will "chirp" indicating that the system is ready to accept programming for the unlock/panic channel.(If you desire one button to control lock & unlock, move on to step 9)
8. Press and hold the selected remaining choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of unlock channel was successful.
9. Press and release the valet push-button switch one time.
10. The dash mounted LED will flash 3 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel2, or the pulsed ground output for remote trunk release, remote car starter, etc.
11. Press and hold the selected remaining choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of channel 2 was successful.
12. Press and release the valet push-button switch one time.
13. The dash mounted LED will flash 4 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel 3, or the additional pulsed ground output if available on your model. NOTE: If the program switch is operated again, the circuit will recycle through the program mode. In other words, press 1 time to access the lock function, 2 times to access the unlock function, 3 times to access the start function. When programming is complete, simply turn off the ignition switch to exit the program mode.

ERASING TRANSMITTERS IF THEY HAVE BEEN LOST OR STOLEN: NOTE: Before you begin to erase the lost or stolen transmitter(s), have all transmitters available that you wish to remain programmed. These will be used during the program process to identify transmitters that will continue to be used.

Enter the transmitter program mode:
1. Turn the ignition switch to the “ON” position.
2. Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered)
3. Within 10 Seconds, press and hold the ARM or ARM/DISARM but-ton of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren.(Repeat this for each transmitter you wish to remain stored in the control unit).The receiver stores up to four transmitters. To be certain all transmitter slots in the receiver are occupied with transmitters you wish to continue to use, and all others are erased, you will have to fill all four receiver slots. If in step 3 you identified one transmitter, you will have to fill the additional 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc...
4. Press and hold any unused button or combination of buttons until a long chirp is heard from the siren. Release and press the button or button combination again and again until all remaining slots are full. NOTE: The button or combination of buttons entered will also control the armor arm/disarm function until additional transmitters are added. All unwanted transmitters are now deleted.

Feb 28, 2009 | Car APS02BT2 Transmitter for...

1 Answer

I have a Dell wireless mouse that I never know when it's going to work and when it's not. It's not the batteries and it's not corrosion of the batteries. Also, I can never figure out how to enable it!


Have you read the instructions for set up. The instructions explain how to get the transmitter, keyboard and mouse syncronized and talking to each other. On the Logitech units there is a button under the mouse that initiates connection. Under the keyboard there should be a button as well. The transmitter also has a button.

Feb 20, 2009 | Dell Wireless Keyboard Optical Mouse w0147

1 Answer

I have wireless speakers and the transmitter stopped working. Nothing happens when you plug it in--??? It's only a month old. AW872


Hi I also post in here , so that you can let me know how it goes.

Try unplugging the transmitter from power adapter, if it also has batteries remove them. Also unplug transmitter audio cable.

Then remove batteries/unplug adapters from speakers.

Wait few minutes and reconnect the system.

This is a proper hard reset, and can fix minor problems.

If when you re connect the transmitter does not glow, or you do not have sound on one or both channels then there is a fault.

Check the transmitter audio cable, a short in there can cause troubles.

If you find no problems , then unit is defective, as it is under warranty contact Acoustic Research to validate the warranty here and get the transmitter or the whole set replaced.

http://www.acoustic-research.com/homedecor/HomeDecorInfo.do?ACTION_TYPE_ID=ACTION_TYPE_CONTACT_INFO

Feb 13, 2009 | Audio Players & Recorders

2 Answers

Home link system program?


  1. Turn off the engine.
  2. Erase the factory test codes by pressing buttons 1 and 3. Release the buttons when the two green lights begin to flash (about 20 seconds ).
  3. Choose one of the three buttons to train. Position the end of your hand-held transmitter 1-3 inches (5-14 cm) away from the lower left corner of the EVIC display while keeping the display in view.
  4. Simultaneously press and hold both the desired Transmitter button and the hand-held transmitter button. After a short time, the message TRAINING will show on Transmitter display. Do not release the buttons until the message TRAINED appears on the display (this may take as long as 60 seconds ), release both the Transmitter and hand-held transmitter buttons.
  5. Press and hold the just-trained Transmitter button. TRANSMIT should appear on the display. If your device activates when the Transmitter button is depressed and released, programming is complete. To train the other buttons, repeat the process. Be sure to keep your hand-held transmitter in case you need to retrain the universal transmitter. NOTE: If the message TRANSMIT appears on the Transmitter display but your device does not activate, the device may be equipped with a "rolling code" system. Continue with steps six through eight below to complete the programming of a rolling code equipped device (most commonly a garage door opener).
  6. At the garage door opener receiver (motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. Firmly press and release the "learn" or "smart" button. (The name and color of the button may vary by manufacturer.) NOTE: There are 30 seconds in which to initiate the next step.
  7. Return to the vehicle and firmly press, hold for two seconds and release the programmed Transmitter button. Repeat the "press/hold/release" sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process.
  8. Transmitter should now activate your rolling code equipped device. To program the remaining two buttons, simply repeat the process.

Dec 21, 2008 | Jeep Grand Cherokee Cars & Trucks

4 Answers

2005 Ford ranger sdtarting issues


Bad inertia switch, I just had the same problem.

Sep 17, 2008 | 1991 Ford Ranger Supercab

1 Answer

86 bmw L7


I think your problem might be your fuel relay which is situated next to the fuse box in the engine compartment.

Jul 13, 2008 | 1986 BMW L7

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2398 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...