Question about Emerson EWL20S5 20 in. EDTV-Ready LCD Television

1 Answer

Ewl20s5 Will not power on

Tv was working just fine. It was turned off nightly and one morning, it was like it was not plugged in except it was. Opened up the unit and nothing obvious. Any ideas?

Posted by on

  • 4 more comments 
  • Anonymous Dec 09, 2008

    tv was working fine, I powered off. after 3 hours try to turn on.. no luck makes a slight sound of turning on.. red light .... dont turn on

  • kitchlex Jan 16, 2009

    The TV was fine in the morning and then went to turn on the nothing. No red light and screen will not turn on. I went to an alternative outlet and still not power. What is wrong?

  • mcpopkes Feb 09, 2009

    MY TV is the same model, and only about 2 years old, and the TV was fine when I left the house Friday. When I came back the TV wouldn't turn on. Outlets are fine. THe people at the Emerson service center were completely unhelpful.

  • denisewalker Feb 15, 2009

    tv screem just went out while i was play a game on my xbox. The power outlet has been check and unpluged and pluged back in and all I get is a red light on the power up and then it goes out.

  • Galirish Mar 05, 2009

    My TV shut off after being on for about 1 hour when I went to turn it back on it wouldn't go on. I plugged it into another outlet and nothing. The set is only 2 years old. What's the problem??????????

  • Anonymous Mar 16, 2009

    will not turn on.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 558 Answers

Google bad or blown capacitors image and you will see what you need to look for on the boards primary bad caps are on the power board where the power comes into the computer. inverter board can also be issue but rare.

Posted on May 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My set is plugged into a cable box. the tv will not turn on either manually or with the remote.


Plug the power cord directly into a wall power outlet, and make sure that the standby light is lit (turn it on/off manually to see if anything changes). If there isn't any light, then it's most likely broken.
If the TV works again, being plugged into the power outlet in the wall, then the problem is with the cable box (i bet you figured that out too).

Jul 06, 2014 | Envision L32W761 32 in. LCD TV

1 Answer

Sony KL-50W2U rear projection TV stuck in standby


Try holding down the power button until it turns off and then turn it on again.

Nov 29, 2012 | Sony KL-50W2U

2 Answers

LG LED TV wont turn on


THERE IS A INTERNAL PROBLEM !!! If it is still under warranty, take it back

Jul 28, 2012 | LG 42SL8000 42 in. LED TV

1 Answer

Cant get the power to turn on,worked fine last night, it got unplugged, this morning plugged in, won't turn on and the power button just flashse


Flashing is either an error code or the set trying to boot up--some of the Mitsubishi sets if power removed will blink for a minute and then stop--then the set can be turned on.

a model number?

Apr 28, 2012 | Mitsubishi Televison & Video

2 Answers

Last night the tv was fine i turned it on this


Unplug 20 minutes. Make sure there is adequate ventilation around the set.

Try with the original manufacturer remote to view setup menu.

Power outages come at night. This sometimes resets the TV and other devices. .

Mar 25, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Mitsubishi WD-52525 was working fine and now it will not turn on


This is just a shot - but it worked with my Sony (same problem).
Pressed remote power on button AND held Power button on TV on at the same time.

Set clicked 4 or 5 times and then came on....

Other, most have a (VERY small) reset switch on the rear - near where the power cord enters the TV... Use a flashlight and a mirror to locate it on your set....

Nov 26, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Tv wont turn on worked fine last night


If there is no power at all, then the problem is likely the power supply unit.
The PSU must be tested, then eventually replaced.

May 30, 2009 | Spectroniq PLTV3250 32 in. LCD TV

3 Answers

Crashing sound on Protron 32 TV


no sound, everything was working fine the night before. woke up the next morning, and turned the tv on, and there was no sound at all. nothing from the TV, DVD, and nothing from the Computer. Please help. curtisw_1999@yahoo.com.

Dec 26, 2007 | Protron PLTV-32 Television

3 Answers

Will not turn on, but....


the arc when you plug it in is from the degause cirt operating, the fault sounds like at least a pwr supply repair $100, & or vertical + $50,and or horizontal + $150,If water is the reason.

Dec 06, 2006 | RCA 27F650T 27" TV

Not finding what you are looking for?
Emerson EWL20S5 20 in. EDTV-Ready LCD Television Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...