Question about GE Dryers

1 Answer

Trying to register my washer and dryer on line can not find the right page

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,073 Answers

What is the model and brand

Posted on May 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

1 Answer

No power to dryer. Checked. And rechecked breaker


All dryers have one or 2 safety devices mostly near the vent pipe. They are rated for 350f and are tied into the motor circuit so if a dryer overheats (unless it is gas) it won't run. The dryer posted looks like an electrolux and the fuse on it mounts in the upper right hand corner. My repair page on electrolux at the base of my blog https://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin/agitator-woes/dryer-will-not-work

Nov 08, 2014 | Dryers

1 Answer

Washer won't drain


Have you removed the big draining tube from the back? On the back of the washer there should be 3 lines, two smaller ones and one larger one. The widest one is your drain line. It should be very easy to disconnect. Take it off and shine a flashlight where it connects and try to find any clogs. Check the line itself for any clogs and maybe run hot water through it to get it nice and clean. If you cant find anything its likely a motor may be burnt out for the spin cycle. This will most likely need to be replaced.

Nov 08, 2013 | Kenmore Elite HE4 Electric Dryer

1 Answer

Apartment size washer dryer. I have the chance to


Formed in 1976 in Winston-Salem, NC, the Crosley Corporation consists of a group of independently owned distributors who resurrected the Crosley trade name and introduced a line of refrigerators, freezers, ranges, dishwashers, air conditioners, and other appliances. We carried the heritage of such features as "Shelvador" and "Conservator" that were marketed for decades.

Sep 27, 2013 | Crosley Dryers

1 Answer

Why would you have to put the dryer on 2 times just to dry one load?


A few things come to mind. It may not be your dryer at all, the washer may not be spinning off properly. This happened to me. Check the clothes going in for excess moisture and if that is the case, it is probably the washer. If the washer is OK then back to the dryer. Make sure it is heating properly, and if so there is probably a restriction of some sort in the exhaust line between the unit and where it exits the house. Check the entire line for lint, bird nests, etc. Also check behind the dryer because if you are using flexible line to connect to the wall (the flexible plastic is the very worst), you may have more of it than you need and it will wad up behind the dryer in a series of short bends and drastically reduce the efficiency of the dryer. If that is the case, eliminate as much of it as possible and you will be amazed at the difference.

Jul 09, 2011 | Roper REX5635E Dryer

1 Answer

I just want to register my new washer and dryer and your website gives me everything but registration. My washer is Model WFW9050XVV00 Serial#HL03061440. My dryer is Model #WED9050XW1 Serial #08326. My...


What you need to do is go to the website of the manufacture for your product. Like GE, Maytag and so on. I went threw Goggle to look mine up. I am sure you can register them there, that's how I registered mine hope this helped you out.
wvrain2006

Sep 29, 2010 | Dryers

1 Answer

My Kenmore 600 is not even 2 years old. It spins and appears to have heat but the clothes do not dry. I cleaned a ton of lint from the flex pipe/elbow joint in the rear of the dryer but this has not...


You are on the right track by cleaning the vent elbow.

Also check:

The entire vent line to the outside diverter (the little thing that looks like a hood). Depending on your dwelling, the vent line can also become obstructed with lint and sometimes other things like bird's nests, especially near the discharge outlet. This can happen when the flapper valve at the outlet sticks.

Make sure the lint screen is always kept clean

Another thing to try - empty the dryer and pull it away from the wall until you can get behind it. Disconnect the vent line and turn the dryer on air only. The air velocity coming out of the dryer air exhaust line should feel pretty strong. If it doesn't, the fan could be full of lint as well or there could be an issue with the exhaust fan itself. If the fan is plugged or bad, the back of the dryer will have to be removed and the fan checked.

The dryer should not be overloaded and be sure the clothes being dried aren't too wet (possibly indicating a washer spin cycle issue).

Jan 01, 2010 | Kenmore 62602 Electric Dryer

1 Answer

Front loader gas dryer suddenly stopped heating


The dryer may have a clogged or kinked vent line.
This will stop the heating.
remove the vent line form the rear of the dryer and see if it is hotter.
if so the vent line needs to be cleaned or replaced

Apr 03, 2009 | Dryers

1 Answer

GEW9250pw0 owners manual


Go to managemyhome.com and register. This is a FREE service. Once registered, log in and go to the "Products and Manuals" heading under the "Home" drop down menu. On the the next page, type in your BRAND name and MODEL NUMBER and your owner's manual will be listed in a downloadable .pdf format. I hope this helps you.

Sep 30, 2008 | Whirlpool GEW9250P Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...