Question about Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Change belt how do I change che belt??

Posted by on

  • Anonymous May 18, 2008

    Timing belt-Iunderstand that it goes around the brush and the inner pully. What about the small metal pully in the center?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

Remove the bottom plate, the V belt goes around the inner pulley and then the brush roll. The flat belt goes around the motor shaft and will stretch to around the bigger pulley by the V belt. Change belt - f9e9b4d.jpg

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change belt


this link is the manual will give you full instructions on belt change.
http://www.eureka.com/FileLibrary/d62a4c781dc44b33bdc58a1eafb9ddb5/70883D.pdf

Dec 09, 2012 | Eureka 411A Upright Vacuum

1 Answer

How do I change the belt on the diamond series kirby vacuum


http://www.kirby.com/Portals/0/videos.html

This web page has a video that will show how to change the belt.

Dec 27, 2011 | Kirby Vacuums

1 Answer

Changing the belt on a dyson dc17


Here is a link to the belt you need and the manual which has instructions on how to change the belt:

Dyson DC17 Belt and Manual

Dec 24, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Change fanbelt


Here is a link to the belt you need and a manual you can view which shows you how to change a Dyson DC07 Belt.

Dyson DC07 Belt and Manual

Dec 04, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

How to change belt


goto bissell.com there are videos online to help you change your belt.

Apr 10, 2009 | Bissell 7920 ProHeat Pro-Tech Upright...

1 Answer

How to change the belt


umm..yeah "how to change the belt" is phrase in an outline, or a table of contense. how about actually asking a question, slowfuck?

why do you need to change the belt? what is wrong with your brain? i mean, vacuum. head cavity. is the green light not on? did you break the belt? do you need to change the belt?

i'm not the internet psychic. i don't know what's going on inside your vacuum. you need to say these things. your question is like me saying "how to wipe my *******"

i'm not even going to answer your question...see the other posting i made, if they don't delete it for obscenity first.

gay "internet bullying activisim."


Aug 01, 2008 | Dirt Devil Vacuums

1 Answer

I can't change belt


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832643
Generic problem for all Vacuums
I can't change belt
Posted by jaw53t on July 25, 2008
I can't change belt
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Not knowing the brand name and model number for the vacuum but I can give you a generic way of changing the belt. You 1st need to remove the bottom plate by screws, levers or clips, then you can get @ the belt, if not then you should remove the top cover and then you can get @ the belt. 1st remove the belt from the brushroll and install the new belt on the pulley side of the brushroll and then use a belt puller or a screwdriver with a bend on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line so that is running in a straight line. Replace the bottom plate and the belt change should be done. Please feel free to contact your local vacuum cleaner dealer in your area.

So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

Jul 25, 2008 | Hoover U5753-900 WindTunnel Bagless...

1 Answer

Change my belt on a fantom vacuum model number is f1420gf


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766591
Generic problem for all Vacuums
Change my belt on a
Posted by sylvester021 on Jul 10, 2008
Change my belt on a Fantom vacuum model number is f1420gf

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt change on the Fantom is to remove the bottom plate by undoing the screws, clips or levers, then cut off the old belt, remove the brushroll on the pulley side and place the new belt on the pulley side and replace the brushroll. Then use a belt puller or screwdriver with a hook on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line. The replace the bottom plate and you should be fine. The recommended belt change on a vacuum with a flat belt is every 4 to 6 months for the best cleaning and always use the genuine belts for the Fantom. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

These are the other brands that use the same tech support line
Shark / Euro-Pro / Infinity / Bravetti / and Fantom
http://www.fantom.com/ Customer Tech Support 1-800-798-7398
Hours are Monday thru Saturday from 9:00 AM to 6:00 PM (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 10, 2008 | Vacuums

2 Answers

How to change Vacuum belt


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=553572
Generic problem for all Vacuums
How to change Vacuum belt
Posted by tully054 on Apr 28, 2008
How to change Vacuum belt?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Not knowing the name brand or model # most vacuums belt change from the bottom or by removing the top cover to change the belt for an upright, if you have a bottom plate remove the bottom plate and remove the belt, make sure the brushroll spins free and does not have any thread or hair buildup, once that is done slide the belt onto the brushroll pulley and then stretch the belt onto the motor pulley, once on the 2 pulleys then tract the belt and replace the bottom plate – plug in and turn on to check. If you have the type where the top cover comes off it is then the same procedure listed above for the brushroll and belt. If you have a canister with a powerhead there are 2 or 3 screws on the bottom and the top cover would come off and then follow the procedure just like the upright. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Thanks, Don – The Vac Man
Go Ahead. Use Us.

Apr 28, 2008 | Eureka Mega Boss 4460DT Vacuum

2 Answers

No belt


There are two screws on the top side just behind the Brush housing. Remove these two screws, one on each side, and the top plate can be removed. Then you can follow the directions above.
Hope that helps.

Apr 21, 2008 | Eureka Altima Upright Vacuum Model 2996AVS...

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...