Question about Computers & Internet

1 Answer

HOW DO YOU ADJUST RED TINT OUT FROM SCREEN BACK TO DEFAULT NORMAL COLOR

Posted by on

  • flightcomman Sep 14, 2010

    SORRY, IT IS A VIEWSONIC VG710B

  • flightcomman Sep 14, 2010

    THANK YOU VERY MUCH. I WILL CHECK TO SEE HOW MUCH A BACK LIGHT WILL COST AND HOW DIFFICULT TO INSTALL. FLIGHTCOMMANDER

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Kindly mention the make and model ?

Thanks!!

Posted on Sep 14, 2010

  • taran_2005
    taran_2005 Sep 14, 2010

    Thanks for your response!!

    This is a common problem with Viewsonic. This is caused by the defective backlight lamp and all you need to do is replace the backlight.Unfortunately, there is no reset or default option. You could have a look at the backlight from the below picture :-

    http://cgi.ebay.pl/VIEWSONIC-VE720m-VG71...

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks for using ' Fixya ' and have a nice day!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Images on screen are very red. Tried adjusting everything in the menu but still every thing is like glowing red.


Color balance is labeled "Tint"
Color amount is labeled "Color"

Both are in the "picture" adjustments menu.

Either your tint is swung too far to red, or the color setting is wide open making normally pink faces look sunburned...likely it's a combination of the two; Too much red, and a bit too much color.

Going back to the "default factory setting" in "setup" will also drop all settings to center.

Mar 30, 2010 | Hitachi 50V500 50 in. HD-Ready LCD...

13 Answers

Red tint on screen


u shoud reset your setting try to on

Jul 27, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Color


see if there is a "default" option, if not set everything back to the middle, if the colors are still off you sure its not the convergence?
most big screens allow you to change "color temperature" it's like a default adjustment for 3 different brightness levels.... ie...COOL, WARM picture will show obvious changes in brightness

Apr 24, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

Red tint on screen


Good Day,

Try resetting the TV by unplugging from wall outlet for 3 to5 minutes then plug back in. If no fixya take front grill off and panel and adjust the screen controls, turn color off adjust for Black & White Picture. Good Luck, big IRISH.

Sep 13, 2008 | Hitachi 53UWX10B 53" Rear Projection...

2 Answers

Screen Green Tint


Turn down your color and see if the screen has a normal black & white screen. If it doesn't then the CRT is bad (picture tube). If it is black & White then you have a either lost your red or blue.That problem will be in your video driver circuit of which a service center can handle.

Feb 18, 2008 | RCA 20V500T 20" TV

1 Answer

Picture has gotten darker


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Nov 26, 2007 | Hitachi 53SWX12B 53" Rear Projection...

2 Answers

Color problem


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Nov 06, 2007 | Hitachi 51F59 51" HDTV Projection...

1 Answer

Hitachi 50UX57B 50 inch Rear Projection smearing...


try this

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Sep 18, 2007 | Hitachi 50UX57B 50" Rear Projection...

2 Answers

Sanyo Tv color problem


I would check the green signal all the wat to the display screen to determine is this is a signal problem or a system short. I would recommend that you take this set to a qualified electronics technician

Sep 10, 2007 | Sanyo DS27910 27" TV

1 Answer

Hitachi 52 projection tv


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Jan 22, 2007 | Hitachi 50V710 50" Rear Projection...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...