The samsung monitor ssc21web shows system initialize... the three periods blink
I want to initialize the system or get back into the camera view . The shr 1040 drive is on and 3 of 4 lights on the dvr are lit as such.1. Power is on 2.alarm is not. 3.hdd led blinks on and off 4.rec led light is on and seems red. Why is the system initialize stuck in this position suddenly. Anything i need to do! Why do the three periods after the word initialize blink on and off.
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Repairman (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you tried unplugging the monitor from the 120 volt supply for a minute or two then replug and turn on. Like computers and some flat panel TVs they can freeze-up after an unplanned power loss and need rebooting
Hi, the tire pressure monitor detects any changes in the tire inflation pressure.
Therefore, it must initialize and store it in its memory if the tires
or wheels have been replaced, re-inflated or the tires have been
rotated. You can re-initialize the system by following these steps:
1. Check and make sure that your tires are inflated to the correct pressure
2. Turn the ignition switch
to the ON position. If the low tire pressure warning light comes on,
push and hold the tire pressure warning reset switch (in the glove box)
until the warning light turns off and then release the switch.
3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
4. Initialization is *not* completed until driving at the vehicle speed
of 19 mph or over for more than one hour. the tire pressure monitoring
starts when initialization is completed.
I would advise possibly getting a quad to view all 4 cameras. You can also check on the back of the DVR if there is any other place to plug your monitor into. Usually there is a spot port and a monitor port. One will give you the split screen without using a quad. Any camera should work on your system. You would just need to buy a prefabricated cable if you are not familiar with termating BNC connectors. I have a site below that was helpful when installing the cameras at my house. Hope this was helpful.
is this poe cam? cable footage over 300 ft needs cat5 extender if fiber check media converter to see if single or multimode also check media converter for tx/rx or using cat5 b crossover cable connect directly to laptop type in ip in command bar enter
Samsung told me the newer versions of Windows and Internet Explorer, will not work with this system. Microsoft told Samsung it was their problem. Find a old computer with ME and Explorer 5 and it will work again. I have the ssc17web.
Have you setup a Virtual Server within the D-Link router? This should be on the ADVANCED tab in the D-Links Admin Configuration interface. Upon setup, the router should allow pass through of your request to the network connected device.
You will need the following in this configuration:
Name of device: SSC21WEB (or whatever the name of your device is)
IP Address: 192.168.0.101
Protocol Type: TCP
Public/Private Port: 10000 - 65535
1. check connection wires and terminals are connected correctly there is no struggle in the cable or the cabling has been damage. 2. check the other three cameras the most simple is to connect the cameras that doesnt work in the terminal that does work!